[PG325]

I has a small ding on the C pillar of my F32 and I understand this can't be accessed by the prying tools used normally for dent removal.

I think glue pulling is an option but would like to know if there are any recommendations near or around Bristol, preferably home visit?

[xpro]

I had a dent exactly on the same spot. I actually purchased the puller kit myself and gave it a go. The dent is pretty much all gone, although I can still see it from a certain angle, the bad look is gone, so Im sure the professionals will do an even better job.

[JustChris]

[teaston]

Originally Posted by xpro

I had a dent exactly on the same spot. I actually purchased the puller kit myself and gave it a go. The dent is pretty much all gone, although I can still see it from a certain angle, the bad look is gone, so Im sure the professionals will do an even better job.

Yeah definitely worth doing yourself, I use one of these type of kits as it gets most of the dent out to the point that it's not really noticeable anymore:

https://rover.ebay.com/rover/0/0/0?m...2F273851583574

[thescouselander]

I've used dingmaster in Bradley Stoke and found them to be very good. Not sure why the C pillar wouldn't be accessible but it would definitely be worth getting a professional to look at it before attempting any DIY.

[speedski]

Originally Posted by PG325

I has a small ding on the C pillar of my F32 and I understand this can't be accessed by the prying tools used normally for dent removal.

I think glue pulling is an option but would like to know if there are any recommendations near or around Bristol, preferably home visit?

They couldn't access where I had a door ding on my GC either - instead they drilled a small hole on the ed of the door, did the work (flawlessly I might add) and then put a small rubber bung in the hole they drilled.

It was only then I noticed that BMW have LOADS of bungs on the doors of the GC (completely uniform) - the guy who did mine offered to drill the other door and make it look original if I wanted.

[RENT-A-GOAT]

If you're in the Coventry/Warwickshire area give K-Dentz a call on 07814 918590 he does the PDR for BMW & Mini as well as other high end dealerships in the area and is a total magician when it comes to dents. He did one on my F31 (the common bonnet hinge one) and a very tricky hard to access one on my moms mini. Great guy, brilliant service and very fair pricing.