10-30-2021, 12:09 PM | #1 |
Private First Class
32
Rep 101
Posts |
Will 18x10 +40 fit on f30?
Hello everyone, I found a set of wheels i really want to purchase but before I pull the trigger, wanted to know if they will fit. I have a 2013 335i m sport (f30) and the wheels im trying to buy are 18x10 +40 square all around. And if so, what tire sizes can I run? Will I be needing spacers for either the front or back? Looking for a flush fitment or at least close to it as possible. I am planning to purchase either springs or coilovers as I want to lower the car as well. Any help or advice will be greatly appreciated, thank you!
|
10-30-2021, 10:36 PM | #2 |
Brigadier General
1161
Rep 3,189
Posts |
Perfect rear fitment but not happening on the front.
|
Appreciate
1
alohasurftoad3081.50 |
11-01-2021, 07:06 AM | #3 |
Private First Class
66
Rep 133
Posts
Drives: F32 435dx
Join Date: Mar 2020
Location: Greece
|
Rears fit but will poke.
Fronts, I don't think is a good idea. Wheels are too wide and you definetely going to rub when you turn. Ideal front size is 8.5-9" wide with no more than 35mm offset. |
Appreciate
1
alohasurftoad3081.50 |
11-01-2021, 01:17 PM | #4 |
Brigadier General
3082
Rep 4,333
Posts |
https://f30.bimmerpost.com/forums/sh...8&postcount=16
link above is 19x9.5 ET35 w/255/35/19 18x10 ET40 will NOT fit up front, unless you have at least a 12mm spacer. however lowering the front offset to ET28 will be poking ridiculous and increases the scrub radius to where the tire will rub the fenderwell liner at full lock if using anything wider than 255. adding negative camber may reduce or eliminate the interference. . Last edited by alohasurftoad; 11-01-2021 at 01:23 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|