10-07-2018, 05:04 AM | #1 |
Colonel
1120
Rep 2,244
Posts |
Reverse Camera System Fault / Failure
My camera stopped working today.
On going into reverse, the camera shows for about 1 second (lines and all), then i get a grey screen (2 shades in diagonal), then a warning triangle. I've attached a photo, and link to a video: For reference, this is the camera. It's been working fine for months https://www.ebay.co.uk/itm/BMW-dynam...kAAOSwhvFZLX5F Last edited by ramparts; 10-09-2018 at 11:45 AM.. |
10-11-2018, 07:27 AM | #5 |
Lieutenant General
8245
Rep 16,088
Posts |
Do you even have a TRSVC? That's for side view cameras. Most of the coding I've done with my rear view camera was in the REM or PDC. The exception was enabling the trailer view, which is done in the HU.
|
Appreciate
0
|
11-05-2018, 08:31 AM | #8 |
Registered
0
Rep 4
Posts |
I have a 2018 740i and the rear camera display used to be full screen now it is half screen display with the other half showing an outline of the car. BMW Genius said: "The large rear view camera view can be achieved when in reverse and the camera button to the left of your gear lever is pressed. This will change the display from the smaller rear view camera and Park Distance Control sensors to the full screen. " But this did not work. Any ideas?
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|