11-08-2015, 10:36 AM | #1 |
Registered
0
Rep 3
Posts |
F30 335i lowered w/ Dinan & 19/20 fitment issues
I have hoping someone can help a new 335i owner. Going round and round with my tire guy (who have been willing to experiment - Les Schwab has been great)
I test fit Rotorform BLQ wheels in 20x8.5 ET35 and 20x10 ET40 with Falken 245/35ZR20 (26.9 dia) & 275/30ZR20 (26.5 dia), and had slight front and rear rubbing issues with alignment/camber settings recommended by Dinan. The rear rubbing was most most noticeable, and the tire rubbed on the fender going around a corner faster than 20-25 MPH. Question: Do you think 245/30/20's and 255/30/20's (25.8" and 26.1" diam respectively) would fit? Les Schwab (tire store) now wants me to consider 19x8.5 ET35 and 19x10 ET40, and am not sure what Falken tire would fit. I was thinking a 245/35ZR19 front (25.8" dia) and a 285/30ZR19 (25.8" dia) rear. Only mods to suspension is the Dinan springs. Anyone with experience for a like fitment would be much appreciated! Thanks!!! 2013 335i F30 Sport Line Dinan springs, MPPK |
11-10-2015, 12:30 PM | #2 |
Enlisted Member
45
Rep 38
Posts |
Sorry I can't help with your testing but would like to know if you would happen to know if that setup works on stock height? i.e. was the rubbing caused by the lowered stance?
Thanks! |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|