[Daftasabrush]

I'm trying to find out if I can enable side markers on my UK LED adaptive headlights. I've failed so far, I don't think the lights have them, but I can't check for certain because it's very difficult to capture it in photos.

Any chance someone with LCI LED headlights in the US with side markers would be able to tell me what option is set here please?

Thanks!

[rustyminded]

I have tried using normal codes it only triggered while in parking lights not with full lights on. try the same code but not tms_sml try frm i think

[Daftasabrush]

Originally Posted by rustyminded

I have tried using normal codes it only triggered while in parking lights not with full lights on. try the same code but not tms_sml try frm i think

Fra_v or whatever it is turns on the indicators which doesn't really work on the LCI - it did work on the pre-LCI for the sidemarkers and is what the US cars had coded from the factory. I'm interested what the LCIs have as they have separate LEDs as sidemarkers instead of just using the indicators.

Did you get the LCI orange sidemarkers to work?

[steve@codemybimmer]

Originally Posted by Daftasabrush

I'm trying to find out if I can enable side markers on my UK LED adaptive headlights. I've failed so far, I don't think the lights have them, but I can't check for certain because it's very difficult to capture it in photos.

Any chance someone with LCI LED headlights in the US with side markers would be able to tell me what option is set here please?

Thanks!

Let me see if I have the NCD file for my FEM_BODY module. I have an LCI F30 and you can try and compare.

[TMD29]

The LED coding is in the TMS cafd. Maybe this thread will help:
http://www.bimmerfest.com/forums/sho...andlicht+modus

Also check into the new e-sys launcher with integrated cheat codes. I believe it's already listed there.

[Daftasabrush]

Anyone know if this is what they mean by Standlicht?

[TMD29]

No, you should have Standlicht Modus 1 & Standlicht Modus 2 in both TMS modules listed in the FA. You will need to edit the werte value in each TMS module.

[Daftasabrush]

Originally Posted by TMD29

No, you should have Standlicht Modus 1 & Standlicht Modus 2 in both TMS modules listed in the FA. You will need to edit the werte value in each TMS module.

Ahh I get you, I'll have to pull that cafd off the car and have a look later.

Thanks!