deleting warning sign

whoisthis · 01-04-2016, 05:41 PM

How do i go about deleting this warning sign at every startup?
i was messing around with some codes that i'm not sure of and this happened.
It's hard to tell what i changed

Frogman · 01-05-2016, 12:01 PM

You need to VO code the ECU's that you coded until the message goes away.

But first, if you changed the FA (Vehicle order) and you wrote the new FA to the car, then you may want/need to restore the original VO before you VO code the ECU(s).

It's probably the head unit (HU_XXX), but the message could be triggered by any of the ECU's you coded.

VO coding will restore the ECU to factory defaults.

VO coding: Read FA, Read SVT, Right click on ECU name in SVT list, and select "Code".

Never, never, never, click on "Code Default Values"...

Good Luck!

Jason954x · 01-05-2016, 02:00 PM

Quote:

Originally Posted by whoisthis

How do i go about deleting this warning sign at every startup?
i was messing around with some codes that i'm not sure of and this happened.
It's hard to tell what i changed

lol. Most people usual code their vehicles to get rid of "Legal Disclaimers" but you've actually coded your vehicle to add "Legal Disclaimer".
Anyways, you should be able to find it under the NBT module, I suggest you search for "disclaimer".

whoisthis · 01-06-2016, 04:40 AM

ive done too many codings without keep tracking of them. It'll PITA to do this all over again.
It's probably HUD or category for Idrive.
What codec could possibly trigger this disclaimer? i have deactivated "disclaimer" codes but it's still there.
I must have "activated" a codec regarding Driver Assistance. However i don't have any driver assisting feature on my car.
Maybe by activating the codec i thought it would give me the feature i don't have.. lol

i don't believe it was a codec from the F30 coding list on this forum.

HFW003 · 01-06-2016, 04:59 AM

Why don't you just put the HU back to factory setting and recode it again with what you need?

whoisthis · 01-06-2016, 05:06 AM

How do i just reset the CIC?

Jason954x · 01-06-2016, 06:52 AM

Quote:

Originally Posted by whoisthis

How do i just reset the CIC?

Instead of clicking on "code FDL" click on "Code". Or you can always load from your original back up data.

smithf80 · 01-07-2016, 10:14 AM

er mah gawd everyones making it so complicated.

Go into HU_CIC and change this: Legal_Disclaimer_Time to have this value kein_ld

QuikSilver_ · 01-07-2016, 04:38 PM

^ This.

HFW003 · 01-07-2016, 06:18 PM

Is that the initial warning though?

Been that long since I've seen one.

whoisthis · 01-08-2016, 09:23 PM

it is initial warning.
It's been awhile since i coded and i forgot few steps. i changed the codes few times but they always went back to default. (i have to try again to see if this time it'll work)

I "activated FA" before changing codes instead of at the end. And i forgot to wrap everything up by clicking "code FDL"..

whoisthis · 01-08-2016, 09:25 PM

Quote:

Originally Posted by Jason954x

Instead of clicking on "code FDL" click on "Code". Or you can always load from your original back up data.

You mean right click HUD CIC and click Code. Change codes, save, activate FA, and "code FDL"?

Jason954x · 01-09-2016, 02:37 AM

Quote:

Originally Posted by whoisthis

Quote:

Originally Posted by Jason954x

Instead of clicking on "code FDL" click on "Code". Or you can always load from your original back up data.

You mean right click HUD CIC and click Code. Change codes, save, activate FA, and "code FDL"?

Try Smith32 suggestion, it seems pretty straight forward.

whoisthis · 01-09-2016, 06:27 PM

delete

01-04-2016, 05:41 PM	#1
whoisthis First Lieutenant 81 Rep 308 Posts Drives: bmw Join Date: Jun 2015 Location: michigan iTrader: (0)	deleting warning sign How do i go about deleting this warning sign at every startup? i was messing around with some codes that i'm not sure of and this happened. It's hard to tell what i changed Attached Images __________________ F30 328i sedan
	Appreciate 0 Tweet Quote

01-05-2016, 12:01 PM	#2
Frogman Lieutenant Colonel 288 Rep 1,892 Posts Drives: 2012 F30 328i Join Date: Mar 2012 Location: SoCal iTrader: (0)	You need to VO code the ECU's that you coded until the message goes away. But first, if you changed the FA (Vehicle order) and you wrote the new FA to the car, then you may want/need to restore the original VO before you VO code the ECU(s). It's probably the head unit (HU_XXX), but the message could be triggered by any of the ECU's you coded. VO coding will restore the ECU to factory defaults. VO coding: Read FA, Read SVT, Right click on ECU name in SVT list, and select "Code". Never, never, never, click on "Code Default Values"... Good Luck!
	Appreciate 0 Quote

01-06-2016, 04:40 AM	#4
whoisthis First Lieutenant 81 Rep 308 Posts Drives: bmw Join Date: Jun 2015 Location: michigan iTrader: (0)	ive done too many codings without keep tracking of them. It'll PITA to do this all over again. It's probably HUD or category for Idrive. What codec could possibly trigger this disclaimer? i have deactivated "disclaimer" codes but it's still there. I must have "activated" a codec regarding Driver Assistance. However i don't have any driver assisting feature on my car. Maybe by activating the codec i thought it would give me the feature i don't have.. lol i don't believe it was a codec from the F30 coding list on this forum. __________________ F30 328i sedan
	Appreciate 0 Quote

01-06-2016, 04:59 AM	#5
HFW003 Brigadier General 5685 Rep 3,225 Posts Drives: 2024 M340i xdrive Join Date: Apr 2013 Location: Newcastle, Australia iTrader: (0)	Why don't you just put the HU back to factory setting and recode it again with what you need?
	Appreciate 0 Quote

01-06-2016, 05:06 AM	#6
whoisthis First Lieutenant 81 Rep 308 Posts Drives: bmw Join Date: Jun 2015 Location: michigan iTrader: (0)	How do i just reset the CIC?
	Appreciate 0 Quote

01-07-2016, 10:14 AM	#8
smithf80 Major General 2806 Rep 5,316 Posts Drives: G80 M3 6MT Join Date: Mar 2014 Location: Long Island, NY iTrader: (1) Garage List 2022 G20 330i [9.00] 2018 F80 M3 [9.75]	er mah gawd everyones making it so complicated. Go into HU_CIC and change this: Legal_Disclaimer_Time to have this value kein_ld __________________ Scott, Partner Insight Automotive Consulting Click HERE for all discounted BMW New Car Pricing Click HERE for all BMW In Stock Inventory Specials Call/Text: 516-416-5481 Email: scott@insightautoconsulting.com
	Appreciate 1 Quote

01-07-2016, 04:38 PM	#9
QuikSilver_ Captain 175 Rep 614 Posts Drives: 2016 F36 M Sport Join Date: May 2015 Location: Houston, TX iTrader: (2) Garage List 2016 BMW 428i Gran ... [0.00]	^ This. __________________ *2016 BMW 428i Gran Coupe, M Sport, Glacier Silver Metallic*
	Appreciate 0 Quote

01-07-2016, 06:18 PM	#10
HFW003 Brigadier General 5685 Rep 3,225 Posts Drives: 2024 M340i xdrive Join Date: Apr 2013 Location: Newcastle, Australia iTrader: (0)	Is that the initial warning though? Been that long since I've seen one.
	Appreciate 0 Quote

01-08-2016, 09:23 PM	#11
whoisthis First Lieutenant 81 Rep 308 Posts Drives: bmw Join Date: Jun 2015 Location: michigan iTrader: (0)	it is initial warning. It's been awhile since i coded and i forgot few steps. i changed the codes few times but they always went back to default. (i have to try again to see if this time it'll work) I "activated FA" before changing codes instead of at the end. And i forgot to wrap everything up by clicking "code FDL".. __________________ F30 328i sedan
	Appreciate 0 Quote

01-09-2016, 06:27 PM	#14
whoisthis First Lieutenant 81 Rep 308 Posts Drives: bmw Join Date: Jun 2015 Location: michigan iTrader: (0)	delete __________________ F30 328i sedan Last edited by whoisthis; 02-02-2016 at 02:25 AM..
	Appreciate 0 Quote