[Sir Loin]

Hi. Will new software be needed to code for F80 M3 and F82 M4?

[shawnsheridan]

Originally Posted by Sir Loin

Hi. Will new software be needed to code for F80 M3 and F82 M4?

Coding software is not model specific.

For any car, you need PSdZData version >= to the last version of ISTA/P used to program the car.

A 2009 Fxx programmed yesterday would need the newest PSdZData for coding, just the same as a brand new 2014 Fxx arriving on the boat.

[BooGooBird]

Originally Posted by Frogman

I've seen this exact same thing when I tried coding the JUNCTION_VIEW_HUD on my CIC. When navigating a route, the map would freeze along with the HUD map info display and then the head unit would reboot.

I turned JUNCTION_VIEW_HUD off and everything went back to normal.

If you didn't set this coding value, then I would just VO code your HU_CIC back to factory defaults and see if that clears the issue.

Man thanks for the reply! I was trying to change that but I was not sure by the time. I lost my note for what i have coded. I will try to deactive it later. And could you please let know if bmap_juction_view is default by nich_aktv or aktv?

Thanks a lot Frogman

[Frogman]

Originally Posted by BoOoZ

Man thanks for the reply! I was trying to change that but I was not sure by the time. I lost my note for what i have coded. I will try to deactive it later. And could you please let know if bmap_juction_view is default by nich_aktv or aktv?

Thanks a lot Frogman

bmap_junction_view is aktiv by default on my car.

[kevinmac]

Thank you Shawnsheridan!

Originally Posted by shawnsheridan

It means that in addition to ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN, you need to code the following:

FEM_BODY => KOMFORTSCHLIESSUNG_FB = aktiv (for Fob)
FEM_BODY => KOMFORTSCHLIESSUNG_PA = aktiv (for Comfort Access)

[theinfamousdrew]

So the only way to get this software to work is to pay a random guy for a token?

[shawnsheridan]

Originally Posted by theinfamousdrew

So the only way to get this software to work is to pay a random guy for a token?

Well, no. If you are good with Encryption and Java, you can always make your own.

And incidentally, both the main sellers are hardly "random". They are fellow forum users like you, and have been doing this a long time. If there was an issue with either one of them, you would have read about it by now.

[theinfamousdrew]

Originally Posted by shawnsheridan

Well, no. If you are good with Encryption and Java, you can always make your own.

And incidentally, both the main sellers are hardly "random". They are fellow forum users like you, and have been doing this a long time. If there was an issue with either one of them, you would have read about it by now.

Thanks. I did find that thread.
I didn't mean "random" in a bad way by the way.

With GT1, INPA, winkfp, etc.... I've been helping people obtain and install that software for years at no charge. I found it a bit odd that guys are profiting off a java script.

[shawnsheridan]

Originally Posted by theinfamousdrew

...
I've been helping people obtain and install that software for years at no charge.....

Trust me, I know...

[alienranch]

Originally Posted by shawnsheridan

Trust me, I know...

shawnsheridan could've retired some time ago if he only charged $1 per assist. Glad he doesn't though or I'd be poor.

[troyleescong]

Originally Posted by Aritaurus

I think you just need to add 610 to your VO and assuming that you see HUD now on your SVT, you will need to VO code the following ECU's.

HU_CIC
HUD
KOMBI

Is that correct Shawn?

Thanks so much Aritaurus and Shawn

[shawnsheridan]

Originally Posted by alienranch

shawnsheridan could've retired some time ago if he only charged $1 per assist. Glad he doesn't though or I'd be poor.

Haha..not sure I could have retired, but I would have a new M6GC I think.

[RubenBla]

Shawn,

could you please send me the links for latest E-sys, PSdZData and the new Patch / Token. My car, a 320i GT, was build end of march '14.

Thanks in advance
Will

[shawnsheridan]

Originally Posted by RubenBla

Shawn,

could you please send me the links for latest E-sys, PSdZData and the new Patch / Token. My car, a 320i GT, was build end of march '14.

Thanks in advance
Will

PM sent.

[Sir Loin]

Originally Posted by shawnsheridan

Coding software is not model specific.

For any car, you need PSdZData version >= to the last version of ISTA/P used to program the car.

A 2009 Fxx programmed yesterday would need the newest PSdZData for coding, just the same as a brand new 2014 Fxx arriving on the boat.

Thanks Shawn. Do I understand correctly that we will need to wait for new PSdZdata in order to code the new F8x cars? Thanks.

[shawnsheridan]

Originally Posted by Sir Loin

Thanks Shawn. Do I understand correctly that we will need to wait for new PSdZdata in order to code the new F8x cars? Thanks.

I did not say that.

I said you need PSdZData >= to the last version of ISTA/P used to program the car.

I have no idea what version of ISTA/P these cars will be programmed with, but I venture to guess it will be at least 52.2.

[aacabriolet]

Originally Posted by shawnsheridan

PM sent.

Could I get that too please? '14 435i. Many Thanks!

[shawnsheridan]

Originally Posted by aacabriolet

Could I get that too please? '14 435i. Many Thanks!

PM sent.

[hsk1610]

I'm interested in coding my vehicle to the shorter maintenance schedule. Assuming I have the updated files, I add 8KL to VO but not sure what individual parameters need changing in FEM_BoDY, Kombi, etc for a CIC based car. Can someone help? Thanks.

[shawnsheridan]

Originally Posted by hsk1610

I'm interested in coding my vehicle to the shorter maintenance schedule. Assuming I have the updated files, I add 8KL to VO but not sure what individual parameters need changing in FEM_BoDY, Kombi, etc for a CIC based car. Can someone help? Thanks.

If your plan is to change "individual parameters", then you would not be adding anything to VO. The whole purpose of adding Option Code to FA, is to VO Code the car, and let it determine and make the individual parameter changes needed to support the added Option Code.

[hsk1610]

Originally Posted by shawnsheridan

If your plan is to change "individual parameters", then you would not be adding anything to VO. The whole purpose of adding Option Code to FA, is to VO Code the car, and let it determine and make the individual parameter changes needed to support the added Option Code.

OK, thanks.

[bmwjpn]

Shawn,

Could you please send me the links for latest E-sys, PSdZData and the new Patch / Token. My car, a 640i GC, was build end of July 2013.

Many thanks in advance,

Jason