[S1LV3RSAMURA1]

Do they sell the front lip for an F30 M Sport without the splitters? I just want to attach the bottom lip without covering the stock M Sport splitters...
Has anyone seen this or know where to buy it? They sell the splitters without the bottom lip, do they sell the lip without the splitters?
Thanks in advance

[335i_4D]

Haven't see it sold without the splitters.

But then again, you can find the lip now for about 100$ (Ebay).
So get it, and throw away the splitters if you don't want them.

[USC2000]

Just paint the splitters to match the car.

[Dippydo]

Originally Posted by USC2000

Just paint the splitters to match the car.

This. Would never know if you painted it.

[S1LV3RSAMURA1]

Originally Posted by Dippydo

This. Would never know if you painted it.

Not true guys. They dont fit perfectly over the existing splitters. All the ones I've seen on ebay and the one I ordered,The spliiters and the bottom lip are 1 piece. Kinda stupid if u ask me.

[RW Carbon]

Originally Posted by S1LV3RSAMURA1

Not true guys. They dont fit perfectly over the existing splitters. All the ones I've seen on ebay and the one I ordered,The spliiters and the bottom lip are 1 piece. Kinda stupid if u ask me.

Most you see on Ebay will be a 1 piece design. The ones we carry are 3 piece.

http://www.rwcarbon.com/108/0/0/451/...t-spoiler.html

[Dippydo]

Originally Posted by S1LV3RSAMURA1

Not true guys. They dont fit perfectly over the existing splitters. All the ones I've seen on ebay and the one I ordered,The spliiters and the bottom lip are 1 piece. Kinda stupid if u ask me.

They are 1 piece but has a clear break line that any professional body shop will be able to paint as many on here have making it look like multiple pieces.

[Dippydo]

Originally Posted by RW Carbon

Most you see on Ebay will be a 1 piece design. The ones we carry are 3 piece.

http://www.rwcarbon.com/108/0/0/451/...t-spoiler.html

Can you take a picture of yours in 3 pieces? I am curious because the way mine is molded it was molded in separate pieces then it looks to be sonic welded so it still gives the appearance as a multiple piece but technically two. By three pieces you mean the two top flangs can separate from the bottom leading edge?

[RW Carbon]

Originally Posted by Dippydo

Can you take a picture of yours in 3 pieces? I am curious because the way mine is molded it was molded in separate pieces then it looks to be sonic welded so it still gives the appearance as a multiple piece but technically two. By three pieces you mean the two top flangs can separate from the bottom leading edge?

My apologies. I was thought you are talking about the cf version. We make a polypropylene 1 piece version and a 3 piece cf version.

[S1LV3RSAMURA1]

Originally Posted by RW Carbon

Most you see on Ebay will be a 1 piece design. The ones we carry are 3 piece.

http://www.rwcarbon.com/108/0/0/451/...t-spoiler.html

So do u have a 3 piece or not? I'd also like to see each of the 3 pieces in a pic also.
Thanks

[RW Carbon]

Originally Posted by S1LV3RSAMURA1

So do u have a 3 piece or not? I'd also like to see each of the 3 pieces in a pic also.
Thanks

"We make a polypropylene 1 piece version and a 3 piece cf version."

The only pictures I have are the ones on the site which show it put together.

[retiredmarine]

Just paint it. people have done it.

http://f30.bimmerpost.com/forums/att...4&d=1352677062

[335i_4D]

I know I did. ^

[retiredmarine]

Originally Posted by S1LV3RSAMURA1

Not true guys. They dont fit perfectly over the existing splitters. All the ones I've seen on ebay and the one I ordered,The spliiters and the bottom lip are 1 piece. Kinda stupid if u ask me.

Buy the OEM splitter and you wont have to worry about this

[Dippydo]

Originally Posted by S1LV3RSAMURA1

Not true guys. They dont fit perfectly over the existing splitters. All the ones I've seen on ebay and the one I ordered,The spliiters and the bottom lip are 1 piece. Kinda stupid if u ask me.

Its also stupid to spend 500 bucks on the OEM splitter made out of PVC plastic that costs them literally 10-15 bucks when the one I got from eBay is 100% identical when on the car.

But like Retired says, if you dont like go buy the OEM.

[S1LV3RSAMURA1]

I think I just bought one from the wrong seller. That's why I am having fitment issues. I am actually sending it back for a full refund. Im still looking for the right seller on ebay. Another thread has mentioned the seller Selma Restyling. I haven't been able to locate his/her page though.

[Prissy]

Originally Posted by S1LV3RSAMURA1

I think I just bought one from the wrong seller. That's why I am having fitment issues. I am actually sending it back for a full refund. Im still looking for the right seller on ebay. Another thread has mentioned the seller Selma Restyling. I haven't been able to locate his/her page though.

Get the $100 shipped one from taiwan, and just disconnect/cut the bottom lip, the lip should be a perfect fit like oem. There are already couple of people that purchased this lip, and there a thread about it too.

if you Ebay "f30 splitter" you'll find the CF splitter (without the bottom lip), and they go for $100-$200 shipped. But I am unsure about the fitment and quality.