08-07-2017, 12:10 PM | #1 |
Private First Class
221
Rep 172
Posts |
Against the grain: high offset wheels
Everyone tends to look for the lowest offset the car will allow, but I'm wondering if anyone have experience with higher offset wheels. Looking at the following specs:
Size: 18x9 squared Offset: 47mm Tires: 235-245/40/18 I'll also be at stock x-drive height. Is there enough space on the inside of the wheel well to accommodate, or would I start rubbing at full lock or would I be hitting the strut? Spacer's an option I guess, but not looking to be hella flush. Thanks! |
08-08-2017, 06:42 AM | #3 |
A family of bimmers
2744
Rep 7,741
Posts |
why would you run that?
__________________
2018 PB/Black G01 X3M40i | 699M | ZDA | ZPP | ZPX | Maxton front lip | X3M vents | 15mm Spacers | Diamond G20 style grills |
Appreciate
0
|
08-08-2017, 12:17 PM | #4 |
Private First Class
221
Rep 172
Posts |
Hard to say no to free stuff. He's hours away though, so I'd rather have an educated guess before driving that far.
I've also done the low offset, camber and fender rolling thing in previous car and I've outgrown all of that I guess. Last edited by Sam!; 08-08-2017 at 12:23 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|