10-04-2017, 05:20 PM | #1 |
Lieutenant
213
Rep 589
Posts |
Aftermarket Oil Catch Can Question
Hey folks,
So looking into adding a catch can and noticed most don't offer a gauge to monitor when to empty it. I saw a YouTube video on installation and there was one that showed a catch can that had a clear level gauge on it so you could see when it was getting full and time to empty it. Does anyone off-hand happen to know if this exists out there on them thar interwebs? I'll have to obviously search harder if it does, but just wondering if anyone knew off the top of their head or actually owns one. Lastly, for those using one, which brand are you using and your general thoughts on it? Thanks in advance. |
10-04-2017, 05:27 PM | #2 |
#gotboost
517
Rep 861
Posts |
I run the large circuit sports catch can on my SR20DET. It came with some nasty looking fish tank tubes that I swapped out for braided stainless steel lines with some earl's black AN looking worm clamps
Catch can: https://www.importimageracing.com/pr...SABEgJt2PD_BwE Braided lines: http://www.jegs.com/p/JEGS-Performan...52578/10002/-1 Hose clamps: http://www.jegs.com/i/Earl's/361/900...CABEgKuLvD_BwE
__________________
2018 F87 M2 (09/2020 - )
Dinan Cold Air Intake |Dinan Axle Back | VRSF 6.5" Intercooler | VRSF Catless Downpipe | VRSF Charge Pipes | BM3 | MST Inlet v2 | Turbosmart VR11 2013 F30 328i (12/2015 - 09/2020) SOLD! |
Appreciate
1
LiquidMercury212.50 |
Post Reply |
Bookmarks |
|
|