[M3AWD]

Sweet rides!

Originally Posted by Presario

do you know what this M Sport is dropped on? and Spacers?

[Sedan_Clan]

Originally Posted by M-SP0RT

Sweet rides!


do you know what this M Sport is dropped on? and Spacers?

Bilstein coilovers and H&R or Macht Schnell spacers.

[EZgoE90]

Thanks for sharing and for doing it so quick! Thanks to JNLBC for helping me set up BMW office it was so simple I couldn't figure it out haha. Till next time

[Iceburg]

Woah, those are some hot F30's

Thank you for posting, great pics and beautiful cars.

[AHB900]

Originally Posted by Presario

Dude, are you serious? That was us! The white F30 was my car.

Haha I figured, I noticed which car is yours in the photo/video forum. Its literally my favorite one. I was actually heading down to test drive the f30/f32.

[JN1]

Originally Posted by Presario

Haha, except one is undercover! White tiger? What kind of album you making? LOL!

errrr... black panther

Originally Posted by M-SP0RT

Sweet rides!


do you know what this M Sport is dropped on? and Spacers?

Yup... what Sedan_Clan said.

It's the same car that is in your signature.

[Jchan112]

Thanks again for the coding! Makes me feel like I got a new toy!! Lol!! I'm not on the forums too much so shoot me a PM for the next meet! Thanks again guys, pleasure to meet everyone! =)

[LAwolverine]

I missed out! Shots look great Presario.

[M3AWD]

Originally Posted by Sedan_Clan

Bilstein coilovers and H&R or Macht Schnell spacers.

Originally Posted by JNLBC

Yup... what Sedan_Clan said.

It's the same car that is in your signature.

thanks

I should have my own car in my signature in less than 2 weeks

[Presario]

Originally Posted by LAwolverine

I missed out! Shots look great Presario.

Thanks bud. Hope to see you at the next meet!!

Originally Posted by M-SP0RT

thanks

I should have my own car in my signature in less than 2 weeks

Congrats! Can't wait to see it. JNLBC is flattered that you have his car in your sig in the interim.

[Presario]

Originally Posted by Jchan112

Thanks again for the coding! Makes me feel like I got a new toy!! Lol!! I'm not on the forums too much so shoot me a PM for the next meet! Thanks again guys, pleasure to meet everyone! =)

Glad you came out bud. My car definitely feels like a new toy. See you at the next meet!

[frenchfries]

damn norcal is DEAD

[JN1]

Originally Posted by frenchfries

damn norcal is DEAD

I bet it's not. You just gotta get peeps together.

[itsFelo]

Hey Presario, any idea when the next meet will be?

[RollingLower42]

Hey guys,

I have some pretty important information I think everyone should know.
Here is the jist of what I am going to say: If you are running a tune / JB4, you should have the tune turned OFF before doing coding!

I did not know this. After our coding session Sunday, I noticed first, that the electrical in my car was re-setting as the coding was going on. I did a total of 4 things coding wise, auto-start stop to last setting, DVD in motion, side blinkers only light up at night when they are blinking and disabled the passenger seat belt chimes... I noticed after a couple of codes, the radio turning on by itself. Later on I got in my car and notice my side mirrors moved as well from my previous settings..

After we ate at Porto's, I was driving home and my car went into Limp mode. After it was in limp mode, and turned off, I noticed the car was not as fast as I have been used too...It felt like I had no boost and was running stock again..

I had to have Dr-Euro re-install my JB4 today. He was very helpful and got it back to normal again! We even did some logs that I just sent to Terry @ Burger. The numbers looked pretty good according to Dr-Euro, and I also could immediately feel the boost again in all my runs..

I think it is important everyone should know this before doing coding!

Also, if you have the Burger chord, take it out of your engine bay! I had left mine in there, but have it out now. Rumor has it, if that wire is not tied down, comes loose and touches one of the silver batter terminals in your engine, you can possibly fry your ECU.. I did not know this and am lucky that did not happen.

Be safe everyone, set JB4 to map 0 before coding and keep the burger chord out of the engine. Just a warning, you do not want to go into limp mode!

Hope to see everyone soon

[JN1]

(NSFW - language)

...and that was a PSA courtesy of RollinLower42

[Presario]

Originally Posted by JNLBC

(NSFW - language)

...and that was a PSA courtesy of RollinLower42

Dude, you're becoming the new travelbro!

Thanks for the heads up RollinLower42!

[Presario]

A few new photos added to the lot.

[Presario]

Originally Posted by FelixStepanyan

Hey Presario, any idea when the next meet will be?

Hey Felix,

Not quite sure when it will be if you need coding. Most likely it'll be after the new year. I am planning an F30 cruise around Jan/Feb so hopefully you can make it out for that. Check the SoCal section for updates.

[Frogman]

Originally Posted by RollingLower42

Hey guys,

I have some pretty important information I think everyone should know.
Here is the jist of what I am going to say: If you are running a tune / JB4, you should have the tune turned OFF before doing coding!

I did not know this. After our coding session Sunday, I noticed first, that the electrical in my car was re-setting as the coding was going on. I did a total of 4 things coding wise, auto-start stop to last setting, DVD in motion, side blinkers only light up at night when they are blinking and disabled the passenger seat belt chimes... I noticed after a couple of codes, the radio turning on by itself. Later on I got in my car and notice my side mirrors moved as well from my previous settings..

After we ate at Porto's, I was driving home and my car went into Limp mode. After it was in limp mode, and turned off, I noticed the car was not as fast as I have been used too...It felt like I had no boost and was running stock again..

I had to have Dr-Euro re-install my JB4 today. He was very helpful and got it back to normal again! We even did some logs that I just sent to Terry @ Burger. The numbers looked pretty good according to Dr-Euro, and I also could immediately feel the boost again in all my runs..

I think it is important everyone should know this before doing coding!

Also, if you have the Burger chord, take it out of your engine bay! I had left mine in there, but have it out now. Rumor has it, if that wire is not tied down, comes loose and touches one of the silver batter terminals in your engine, you can possibly fry your ECU.. I did not know this and am lucky that did not happen.

Be safe everyone, set JB4 to map 0 before coding and keep the burger chord out of the engine. Just a warning, you do not want to go into limp mode!

Hope to see everyone soon

I'm surprised this happened and am sorry to hear you were having problems.

I can't see how coding those things caused any issue with the DME related things, it's not touched in any coding we do (on purpose!).

First, when you code an ECU, the ECU is "rebooted" and initialized.

When you code the FEM_BODY (lights, ASS, etc), it will reset the FEM and that WILL reset the mirrors, you will have to readjust them. That occurs when coding any F30. So what you saw is normal.

When you code the HU_CIC (DVD in motion), it reboots the head unit and the radio turns on. This also occurs on all F30's and is normal.

The 4 things that were coded only affected the FEM, HU_CIC, and ACSM ECU's. I don't think the tune is connected to those, are they?

I have coded other F30's with a stage 1 tune and one with the PPK and had no issues at all.

Did Dr Euro reset your 3 ECU's back to factory defaults or did they indicate that the coding was the cause, or was it just coincidence?

[JN1]

Originally Posted by Frogman

I'm surprised this happened and am sorry to hear you were having problems.

I can't see how coding those things caused any issue with the DME related things, it's not touched in any coding we do (on purpose!).

First, when you code an ECU, the ECU is "rebooted" and initialized.

When you code the FEM_BODY (lights, ASS, etc), it will reset the FEM and that WILL reset the mirrors, you will have to readjust them. That occurs when coding any F30. So what you saw is normal.

When you code the HU_CIC (DVD in motion), it reboots the head unit and the radio turns on. This also occurs on all F30's and is normal.

The 4 things that were coded only affected the FEM, HU_CIC, and ACSM ECU's. I don't think the tune is connected to those, are they?

I have coded other F30's with a stage 1 tune and one with the PPK and had no issues at all.

Did Dr Euro reset your 3 ECU's back to factory defaults or did they indicate that the coding was the cause, or was it just coincidence?

Chris has a JB4 Stage 2 and that might be the difference. I am running stage 1 but did the bulk of my coding prior to installing the tune. The only thing I had changed last weekend is the Sport mode configuration.

[sinuspain]

Damn Chris! This was right after you said you never got limp mode! Hah