[efunnra]

Is it possible to code (if not already existing) so that the turn signals are a tad longer when flashing? I just feel that they're just a tiny bit too short when flashing.

[Gavroche]

Sure. Check the coding cheat sheet. It's there.

[efunnra]

Originally Posted by Gavroche

Sure. Check the coding cheat sheet. It's there.

Thanks for replying, but it isn't. Unless you can point it out exactly where it is because I've read those thoroughly and the option isn't in the cheat sheet?

[kitster]

I'm assuming your talking about when the indicator blinks 3 times e.g. when moving lanes.

FEM_BODY [3060]
BLINKZYKLEN_ANZAHL_TIPP
Value: werte = X-1
Default: werte = 02
Change the triple blinker blinks to any amount. (Value is XX + 1)

[efunnra]

Originally Posted by kitster

I'm assuming your talking about when the indicator blinks 3 times e.g. when moving lanes.

FEM_BODY [3060]
BLINKZYKLEN_ANZAHL_TIPP
Value: werte = X-1
Default: werte = 02
Change the triple blinker blinks to any amount. (Value is XX + 1)

no, the initial time that the indicator bulb stays on before turning off.

[Orion4]

I had mine coded remotely to flash 7 times when i momentarily trigger the turn signal. Coder said that 7 was the maximum.

[HFW003]

Originally Posted by efunnra

no, the initial time that the indicator bulb stays on before turning off.

AFAIK this cannot be done, I've never seen it anywhere.