F32 435i ZHP with OEM 513M wheels

mtechnik3 · 10-04-2017, 07:53 PM

Hi guys,

I installed a set of style 513M wheels. They were taken directly off of a new M4. I had my eye on them for a while and was happy when a set came up. I think they pull the overall OEM + look together nicely. I have not experienced any fitment issues or rubbing whatsoever. I will plan to take some better quality photos (these are out of my 6s).

Specs and modifications:

2016 435i ZHP Edition
H&R sport springs (part # 28878-2)
Style 513M OEM wheels / Michelin Pilot Super Sport tires
F: 18x9 (ET28) 255/40R18
R: 18x10 (ET40) 275/40/R18

perryo91 · 10-04-2017, 08:32 PM

Looks amazing man, great job.

Do you find yourself scraping alot? With your lip and the H&R's?

I thought Dinan might be too low, but you're rocking the H&Rs which is like an extra half inch.

mtechnik3 · 10-04-2017, 10:52 PM

Quote:

Originally Posted by perryo91

Looks amazing man, great job.

Do you find yourself scraping alot? With your lip and the H&R's?

I thought Dinan might be too low, but you're rocking the H&Rs which is like an extra half inch.

Thank you! I do have to be mindful with the front lip. I've gotten used to what angles I need to take on inclines/declines. I've only scraped it a few times (minimally). If this means anything - it survived a full winter in Minneapolis and now I live in Chicagoland suburbs. I had the front end and lip wrapped with paint protection film.

perryo91 · 10-05-2017, 06:09 AM

Quote:

Originally Posted by mtechnik3

Thank you! I do have to be mindful with the front lip. I've gotten used to what angles I need to take on inclines/declines. I've only scraped it a few times (minimally). If this means anything - it survived a full winter in Minneapolis and now I live in Chicagoland suburbs. I had the front end and lip wrapped with paint protection film.

Nice, thats good news, I just really want the performance suspension, but for $1500 its really steep. So dinan is a good 1/4 of the price and isnt as low as h&r, but probably performs the same

thx thx

Edit: Did you mod your turn signal bulb to an led or is just the angle in some pics? I dont see the yellowness in some pics from the bulb.

mtechnik3 · 10-05-2017, 07:35 AM

Quote:

Originally Posted by perryo91

Quote:

Originally Posted by mtechnik3

Thank you! I do have to be mindful with the front lip. I've gotten used to what angles I need to take on inclines/declines. I've only scraped it a few times (minimally). If this means anything - it survived a full winter in Minneapolis and now I live in Chicagoland suburbs. I had the front end and lip wrapped with paint protection film.

Nice, thats good news, I just really want the performance suspension, but for $1500 its really steep. So dinan is a good 1/4 of the price and isnt as low as h&r, but probably performs the same

thx thx

Edit: Did you mod your turn signal bulb to an led or is just the angle in some pics? I dont see the yellowness in some pics from the bulb.

Dinan is a great option - you won't be disappointed. Good eye - it's just the angle of the pics. They are stock halogen bulbs. Next on my list to retrofit to led for the front/rear indicator bulbs.

perryo91 · 10-05-2017, 08:27 AM

Quote:

Originally Posted by mtechnik3

Dinan is a great option - you won't be disappointed. Good eye - it's just the angle of the pics. They are stock halogen bulbs. Next on my list to retrofit to led for the front/rear indicator bulbs.

Yeah i want to do that too man, it's just I've looked some up and the bosch brand is about $100 each? Or did I look at the wrong thing. Then there's the coding.

total0wnage · 10-09-2017, 08:48 AM

Looks great, im picking these wheels up today but I will have to change the tire size to avoid x-drive issues

YR430D · 10-11-2017, 10:49 PM

Quote:

Originally Posted by mtechnik3

Hi guys,

I installed a set of style 513M wheels. They were taken directly off of a new M4. I had my eye on them for a while and was happy when a set came up. I think they pull the overall OEM + look together nicely. I have not experienced any fitment issues or rubbing whatsoever. I will plan to take some better quality photos (these are out of my 6s).

Specs and modifications:

2016 435i ZHP Edition
H&R sport springs (part # 28878-2)
Style 513M OEM wheels / Michelin Pilot Super Sport tires
F: 18x9 (ET28) 255/40R18
R: 18x10 (ET40) 275/40/R18

Wow that is one of the nicest F32s I have seen.

Btw what is a ZHP edition?

mtechnik3 · 10-11-2017, 11:07 PM

Quote:

Originally Posted by YR430D

Quote:

Originally Posted by mtechnik3

Hi guys,

I installed a set of style 513M wheels. They were taken directly off of a new M4. I had my eye on them for a while and was happy when a set came up. I think they pull the overall OEM + look together nicely. I have not experienced any fitment issues or rubbing whatsoever. I will plan to take some better quality photos (these are out of my 6s).

Specs and modifications:

2016 435i ZHP Edition
H&R sport springs (part # 28878-2)
Style 513M OEM wheels / Michelin Pilot Super Sport tires
F: 18x9 (ET28) 255/40R18
R: 18x10 (ET40) 275/40/R18

Wow that is one of the nicest F32s I have seen.

Btw what is a ZHP edition?

Thank you for the compliment.

Here is a press release from BMWNA on the ZHP Edition. https://www.press.bmwgroup.com/usa/a...language=en_US

total0wnage · 10-15-2017, 06:17 PM

I have the same wheel setup now and my front tires rub the plastic wheel wells a bit. do you have this issue?

mtechnik3 · 10-15-2017, 06:59 PM

Quote:

Originally Posted by total0wnage

I have the same wheel setup now and my front tires rub the plastic wheel wells a bit. do you have this issue?

No, I don?t have this issue.

total0wnage · 10-15-2017, 07:00 PM

Quote:

Originally Posted by mtechnik3

Quote:

Originally Posted by total0wnage

I have the same wheel setup now and my front tires rub the plastic wheel wells a bit. do you have this issue?

No, I don?t have this issue.

Strange I have same tire specs as well

alohasurftoad · 10-15-2017, 07:12 PM

Quote:

Originally Posted by total0wnage

Strange I have same tire specs as well

are you lowered? he is lowered on h&r sport springs which adds negative camber. it might just be enough to where he doesn't rub.

total0wnage · 10-15-2017, 07:14 PM

Quote:

Originally Posted by alohasurftoad

Quote:

Originally Posted by total0wnage

Strange I have same tire specs as well

are you lowered? he is lowered on h&r sport springs which adds negative camber. it might just be enough to where he doesn't rub.

No I am not but I do have m sport adaptive suspension. Either way the rubbing isn't at the top it's the front plastic rubbing edge of tire when turning

alohasurftoad · 10-15-2017, 07:17 PM

Quote:

Originally Posted by total0wnage

No I am not but I do have m sport adaptive suspension. Either way the rubbing isn't at the top it's the front plastic rubbing edge of tire when turning

yes but when you add negative camber it changes the whole orientation of the tire especially when turning. lowering also affects the toe. the change on his is probably just enough, a few millimeters, and that's all you need to clear or not.

total0wnage · 10-15-2017, 07:20 PM

Quote:

Originally Posted by alohasurftoad

Quote:

Originally Posted by total0wnage

No I am not but I do have m sport adaptive suspension. Either way the rubbing isn't at the top it's the front plastic rubbing edge of tire when turning

yes but when you add negative camber it changes the whole orientation of the tire especially when turning

I just realized I don't have same brand/model tire this tire could be a bit more beef then the one OP used even though it's the same size. The rubbing is very minimal for all I know the plastic could be molded a hair closer on mine to the tire then OPs

cdwalls · 10-15-2017, 08:19 PM

absolutely love that look. I'm local to you as well! What part of Chicago?

mtechnik3 · 10-17-2017, 07:49 AM

Quote:

Originally Posted by cdwalls

absolutely love that look. I'm local to you as well! What part of Chicago?

Sent you a pm.

.BMW. · 11-09-2017, 11:11 PM

Looks great with style 513 wheels!

cdwalls · 11-15-2017, 12:30 PM

Circling back to this thread because I am in love with these wheels on your f32. Can you post some more pictures of them on the car? Thinking about getting a set of these come spring. Thanks

mtechnik3 · 11-17-2017, 05:59 AM

Quote:

Originally Posted by cdwalls

Circling back to this thread because I am in love with these wheels on your f32. Can you post some more pictures of them on the car? Thinking about getting a set of these come spring. Thanks

I will take better photos and post next Spring. The winter set is going on very soon as it's that time of year in the Midwest.

cdwalls · 11-18-2017, 12:23 AM

Quote:

Originally Posted by mtechnik3

Quote:

Originally Posted by cdwalls

Circling back to this thread because I am in love with these wheels on your f32. Can you post some more pictures of them on the car? Thinking about getting a set of these come spring. Thanks

I will take better photos and post next Spring. The winter set is going on very soon as it's that time of year in the Midwest.

Looks awesome, thanks. Just threw my winter tires on today.

10-04-2017, 07:53 PM	#1
mtechnik3 Colonel 415 Rep 2,475 Posts Drives: 2020 M2C Join Date: Aug 2007 Location: WA iTrader: (23)	F32 435i ZHP with OEM 513M wheels Hi guys, I installed a set of style 513M wheels. They were taken directly off of a new M4. I had my eye on them for a while and was happy when a set came up. I think they pull the overall OEM + look together nicely. I have not experienced any fitment issues or rubbing whatsoever. I will plan to take some better quality photos (these are out of my 6s). Specs and modifications: 2016 435i ZHP Edition H&R sport springs (part # 28878-2) Style 513M OEM wheels / Michelin Pilot Super Sport tires F: 18x9 (ET28) 255/40R18 R: 18x10 (ET40) 275/40/R18 Attached Images __________________ 2020 /// M2 Competition Past: 2016 435i ZHP Edition \| 2013 335i \| 2011 135i \| 2008 328i \| 2006 325i
	Appreciate 8 TBN54426.50 YR430D45.50 Styx58.00 Jadar1752.50 slicer2736.00 cdwalls701.00 kern4174445.00 DaFish155.50 Tweet Quote

10-04-2017, 08:32 PM	#2
perryo91 Captain 373 Rep 937 Posts Drives: 335 Join Date: Apr 2009 Location: Florida iTrader: (1)	Looks amazing man, great job. Do you find yourself scraping alot? With your lip and the H&R's? I thought Dinan might be too low, but you're rocking the H&Rs which is like an extra half inch. __________________ Hi
	Appreciate 0 Quote

10-09-2017, 08:48 AM	#7
total0wnage Private First Class 24 Rep 175 Posts Drives: 435i M-Sport Join Date: Feb 2017 Location: South Jersey iTrader: (0)	Looks great, im picking these wheels up today but I will have to change the tire size to avoid x-drive issues
	Appreciate 0 Quote

10-15-2017, 06:17 PM	#10
total0wnage Private First Class 24 Rep 175 Posts Drives: 435i M-Sport Join Date: Feb 2017 Location: South Jersey iTrader: (0)	I have the same wheel setup now and my front tires rub the plastic wheel wells a bit. do you have this issue?
	Appreciate 0 Quote

10-15-2017, 08:19 PM	#17
cdwalls Lieutenant 701 Rep 407 Posts Drives: F32 Join Date: Oct 2017 Location: Los Angeles, CA iTrader: (0)	absolutely love that look. I'm local to you as well! What part of Chicago?
	Appreciate 0 Quote

11-09-2017, 11:11 PM	#19
.BMW. Major General 1863 Rep 5,140 Posts Drives: BMW F11/F31 Join Date: Jun 2013 Location: Sweden iTrader: (0)	Looks great with style 513 wheels!
	Appreciate 1 mtechnik3415.00 Quote

11-15-2017, 12:30 PM	#20
cdwalls Lieutenant 701 Rep 407 Posts Drives: F32 Join Date: Oct 2017 Location: Los Angeles, CA iTrader: (0)	Circling back to this thread because I am in love with these wheels on your f32. Can you post some more pictures of them on the car? Thinking about getting a set of these come spring. Thanks
	Appreciate 0 Quote