[btbossman]

Looks dope!

[kapkanimd]

Originally Posted by Dippydo

Edited...OK maybe you are not as I read your tire sizes.. You are running much smaller tires and stretching them pretty far. I am running 245(f) and 275(r) because I did not want to stretch my tires that far. They are just slightly stretched.

With those widths are you rubbing at all? and do you have any rubbing?

[Dippydo]

Originally Posted by kapkanimd

With those widths are you rubbing at all? and do you have any rubbing?

Very rarely and I mean very. It has to be a large dip that compresses the springs almost all the way down and then it will slightly catch the top of the wheel wells but not the fenders. Like I mention we added a little bit (1-2 Degrees) of neg camber on the rears to get them to tuck better and the fenders were not rolled. No camber was added to the fronts.

My reference to F30 is that he is tucking half the tires. I had mine that low and then gradually raised it a quarter inch until it stopped rubbing to get to where you see it now. He is running a narrower tire on the front and rear which not only is shorter but also made even shorter by stretching them. Some guys like to stretch the tires, but I prefer them more square.

[bennee123]

Would love to see some more photos of the grey BMW with Vossen's installed F30_PERFORMANCE ... Any more shots for us ?

Originally Posted by F30_Performance

One more

[MSport28]

There is a whole gallery of an EBII 335 with CVT's on Vossen's website

(very bottom) http://www.vossenwheels.com/cvt/

[F30_Performance]

sorry guys,

i have only this crapy pics, the weather is not good here....

i will make better pics when better weather comes back

[H4f1d]

Originally Posted by F30_Performance

Here we are but iphone pics only...

And no rubbing!!!

Vossen CVT 9x20 ET35 with 225/35/20
Vossen CVT 10,5x20 ET42 with 265/30/20

Wow, car looks fantastic! Is it true that F30/32 has to have minimum offset of 42 for 9.5 width or more? Any lower than that, wheels will pop out of the fender? Sorry for d silly question, I'll have my f32 coming soon and would like to b ready.

[BTT 335i]

Originally Posted by F30_Performance

Here we are but iphone pics only...

And no rubbing!!!

Vossen CVT 9x20 ET35 with 225/35/20
Vossen CVT 10,5x20 ET42 with 265/30/20

Looks beautiful with that wheels

[Vossen wheels]

Love it!

[tiber]

I've just installed vossen vfs1 to my car. I left the wheal pressure sensors on my old set wchich will be ready for the winter and now I need to get new pressure sensors for the summer tyres. Do you know if standard BMW sensors fit to vossen or do I need to get something speciall? The guy in BMW shop told me that he’s not sure if the original sensors will fit but there is an option to buy universal sensors which should be fine. Anyone has any expirience with this? I need to get rid of the orange code from my dashbords

[Dippydo]

Originally Posted by tiber

I've just installed vossen vfs1 to my car. I left the wheal pressure sensors on my old set wchich will be ready for the winter and now I need to get new pressure sensors for the summer tyres. Do you know if standard BMW sensors fit to vossen or do I need to get something speciall? The guy in BMW shop told me that he’s not sure if the original sensors will fit but there is an option to buy universal sensors which should be fine. Anyone has any expirience with this? I need to get rid of the orange code from my dashbords

Yes the original ones will fit. Better to just buy a new set so you don't have to change them when you swap wheels. Sensors in the USA run about 200 for a set. Not sure in your country the cost.

[tiber]

Thanks Dippydo I've just ordered in BMW - it's 1000pln so about 300$. We are so rich here in EU

[talvarez14]

Did you have any camber or rubbing issues??

[talvarez14]

Originally Posted by F30_Performance

Here we are but iphone pics only...

And no rubbing!!!

Vossen CVT 9x20 ET35 with 225/35/20
Vossen CVT 10,5x20 ET42 with 265/30/20

Did you have any camber issues??

[Bimmer_Boy_22]

Originally Posted by F30_Performance

Here we are but iphone pics only...

And no rubbing!!!

Vossen CVT 9x20 ET35 with 225/35/20
Vossen CVT 10,5x20 ET42 with 265/30/20

Very nice.

[Bimmer_Boy_22]

Originally Posted by Vossen wheels

Love it!

I want them