BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST
>
2014 N47 Injector torque value
| 01-02-2023, 07:14 AM | #1 |
|
New Member
4
Rep 15
Posts
Drives: 2011 335D Sport, deletes, 2.5
Join Date: Aug 2017
Location: Newnan, GA
|
2014 N47 Injector torque value
I have searched and searched...anyone have the torque value for the injector hold down clamp bolt?
after replacing the injectors due to "max learning limit" codes, I found two references to older N47 engines at 26 nm, but nothing on newer engines... |
| 01-02-2023, 02:01 PM | #2 |
|
Private
 74
Rep 80
Posts |
Hey Fixit101 - Here's the general repair within newTIS https://www.newtis.info/tisv2/a/en/f...h-lid/H1L1wfCK - Farkle has noted the correct torque values below for the clamping claw bolt.
Last edited by dreaming.haze; 01-03-2023 at 06:13 PM.. |
|
Appreciate
0
|
| 01-02-2023, 11:41 PM | #3 |
|
Brigadier General
 4041
Rep 3,549
Posts
Drives: 328d Wagon, M2 Comp, i4 eD35
Join Date: Sep 2016
Location: Bay Area, CA
|
The injector clamping claw bolt initial torque is 8Nm then final torque is 26Nm. It's an M8x95 bolt when I pulled mine out this past week.
__________________
-328d Wagon Build Log (with helpful reference links)
-My YouTube Channel for some of the best DIYs and in depth information Please don't PM me for suspension recommendations unless interested in paid private consultations. Last edited by FaRKle!; 01-02-2023 at 11:47 PM.. |
|
Appreciate
0
|
| 01-03-2023, 06:17 PM | #4 |
|
New Member
4
Rep 15
Posts
Drives: 2011 335D Sport, deletes, 2.5
Join Date: Aug 2017
Location: Newnan, GA
|
that's exactly what I needed...Much appreciated fellas!
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
| Tags |
| diesel injector, n47 injector torque |
|
|
