BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

seaa · 08-23-2013, 11:25 PM

Dear Shawn, I have an F30 316i Jun 2013 built. Would greatly appreciate if you could PM or email me at creati87@hotmail.com the link to the latest e-sys, data files and instructions.

Thank you in advance!

shawnsheridan · 08-23-2013, 11:28 PM

Quote:

Originally Posted by seaa

Dear Shawn, I have an F30 316i Jun 2013 built. Would greatly appreciate if you could PM or email me at creati87@hotmail.com the link to the latest e-sys, data files and instructions.

Thank you in advance!

Email sent.

kneesliding · 08-24-2013, 04:45 AM

Quote:

Originally Posted by BRN55

Has anyone tested the new headunit coded and has been able to play videos trough USB? What kind/format? Really curious...

Yep, coded, seems to play pretty much everything you throw at it.

The only that doesnt work, copying from the stick to the internal Hard drive.

Wanted to try reformatting the stick to NTFS and see it that makes a difference.

shawnsheridan · 08-24-2013, 05:48 AM

Quote:

Originally Posted by obispoil

thanks for the detailed description!

could I also have the link to new e-sys and data fies?
Thanks!

Quote:

Originally Posted by shawnsheridan

You have to post an email or wait until you can receive PM's.

PM sent.

amf · 08-24-2013, 09:51 AM

I have installed my e-sys 3.22.5 yesterday. I have connected my 328i 2012 f30 to my laptop. I have opened E-sys and connected all successful.

Does anyone have a video on what to do next. I am not sure where to navigate to so I can turn off seat belt minder.

A video or a phone call will help.

Thanks

Aaron

Thanks

shawnsheridan · 08-24-2013, 09:59 AM

Quote:

Originally Posted by amf

I have installed my e-sys 3.22.5 yesterday. I have connected my 328i 2012 f30 to my laptop. I have opened E-sys and connected all successful.

Does anyone have a video on what to do next. I am not sure where to navigate to so I can turn off seat belt minder.

A video or a phone call will help.

Thanks

Aaron

Thanks

Follow the illustrations in the E-Sys - Getting Started Coding guide:

http://rapidshare.com/files/20447265...d%20Coding.pdf

amf · 08-24-2013, 10:57 AM

Shawn,

Thanks or the step by step. It helped and worked sort of.

I am not able to get into ACSM modules. I can only connect to 1 of the 3 on my car.

I am guessing the 3000 Ausstatftungsflags are in a module I cannot connect to. (trying to turn seat belt minder off)

I get this message

I cannot connect to FEM BODY

similar message as above^^^^

I can connect to HU CIC and I was able to code the legal disclamer to be off.

I am not sure what I am missing.

Aaron

shawnsheridan · 08-24-2013, 11:07 AM

Quote:

Originally Posted by amf

Shawn,

Thanks or the step by step. It helped and worked sort of.

I am not able to get into ACSM modules. I can only connect to 1 of the 3 on my car.

I am guessing the 3000 Ausstatftungsflags are in a module I cannot connect to. (trying to turn seat belt minder off)

I get this message
...

I cannot connect to FEM BODY

similar message as above^^^^

I can connect to HU CIC and I was able to code the legal disclamer to be off.

I am not sure what I am missing.

Aaron

These 2 CAFD's were added in 50.2. You can try adding the two missing CAFD's into your existing PSdZData versions CAFD folder, but you most likely will need the full 50.2 or 50.3 PSdZData.

PM sent.

amf · 08-24-2013, 12:48 PM

Thanks Shawn,

Thanks to F30post.com too.

I am able to sucessfully code my 328i f30 2012.

If anyone in Houston TX needs some help let me know. I will try to help out.

Aaron

shawnsheridan · 08-24-2013, 12:49 PM

Quote:

Originally Posted by amf

Thanks Shawn,

Thanks to F30post.com too.

I am able to sucessfully code my 328i f30 2012.

If anyone in Houston TX needs some help let me know. I will try to help out.

Aaron

Thanks! I'll now start referring everyone to you.

amf · 08-24-2013, 12:57 PM

Quote:

Originally Posted by shawnsheridan

Thanks! I'll now start referring everyone to you.

not what i meant.......hahahahaha

amf · 08-24-2013, 01:11 PM

I coded my mirrors to fold with my key fob today. To fold my mirrors I have to hold the lock button down for a couple of seconds. Is there any way to have them fold with a press of the lock button instead of holding button down?

Thanks

shawnsheridan · 08-24-2013, 01:15 PM

Quote:

Originally Posted by amf

I coded my mirrors to fold with my key fob today. To fold my mirrors I have to hold the lock button down for a couple of seconds. Is there any way to have them fold with a press of the lock button instead of holding button down?

Thanks

Change Werte Value for KMFRT_SCHLIESSEN to 00.

E-Sys - How to Change Werte Values

http://rapidshare.com/files/10078793...e%20Values.pdf

Frogman · 08-24-2013, 02:45 PM

Quote:

Originally Posted by amf

I coded my mirrors to fold with my key fob today. To fold my mirrors I have to hold the lock button down for a couple of seconds. Is there any way to have them fold with a press of the lock button instead of holding button down?

Thanks

On the F30 it's:

FEM_BODY / 3053 / KOMFORT_SCHLIESSEN. As Shawn says, change the werte value. The default is 0F (15 in decimal) and the units are in 100ms, so the default is 1.5 seconds.

I set mine (and others) to 03 or 300ms. That way is only folds when I hold the button down for an extra heartbeat.

I've coded others to 00 for those that want the mirrors to fold every time they lock the car.

kneesliding · 08-25-2013, 05:40 AM

So,

copying video files from an NTFS USB stick to the internal hard drive doesnt work.

Damn, cant work out why its not working.

ioschi2003 · 08-25-2013, 08:32 AM

Quote:

Originally Posted by shawnsheridan

These 2 CAFD's were added in 50.2. You can try adding the two missing CAFD's into your existing PSdZData versions CAFD folder, but you most likely will need the full 50.2 or 50.3 PSdZData.

PM sent.

I Shawn, is a new version 50.3 ? better than 49.1 for X25 ?
Could pls send me the link ?
Regards

shawnsheridan · 08-25-2013, 08:54 AM

Quote:

Originally Posted by ioschi2003

I Shawn, is a new version 50.3 ? better than 49.1 for X25 ?
Could pls send me the link ?
Regards

The PSdZData version used is not a matter of being better, rather it is solely a matter of necessity. Either you have a car that was programed with ISTA/P 2.50.3 and you NEED 50.3 PSdZData to read the ECU's and Code them, or you don't, in which case you DO NOT NEED it.

Using newer PSdZData on a car programmed with older ISTA/P version buys you nothing. The car will still only be capable of the features programmed into it from the older ISTA/P version, unless you are going to flash the ECU's with the new 50.3 firmware.

samaks · 08-25-2013, 09:29 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

Hello Shawn,

May I have the links to the software also? Just ordered the cable.

Also I have a question. Does mirror folding require extra hardware or is that just a software setting? My car does not have mirror folding.

I am curious about what I can do with a standard screen(No NAV) and standard bluetooth. I cannot stream DVD over my screen now and I cannot connect iphone with a standard white iphone cable at the moment.

I can send bmwvin output if it helps.

shawnsheridan · 08-25-2013, 09:35 AM

Quote:

Originally Posted by samaks

Hello Shawn,

May I have the links to the software also? Just ordered the cable.

Also I have a question. Does mirror folding require extra hardware or is that just a software setting? My car does not have mirror folding.

I am curious about what I can do with a standard screen(No NAV) and standard bluetooth. I cannot stream DVD over my screen now and I cannot connect iphone with a standard white iphone cable at the moment.

I can send bmwvin output if it helps.

You will have to post an email, or wait until you can receive PM's.

Mirror Folding requires hardware. The car must currently have Power Folding Mirrors from the Drive's Side Interior Door switch, and then you can make them also fold from Fob and Comfort Access.

With 6NH Basic Bluetooth, and no 609 NAV, hence no Combox, you won't be able to code much at all. Even with a Combox, you can only stream Audio, not Video.

legaleye3000 · 08-25-2013, 09:57 AM

Hi All- I was coding and for some reason when I'm using navigation, instead of showing directions in the HUD, it now shows below the speedometer. Anyone know how to fix this? 2012 F30. Thanks!

carlos BMW · 08-25-2013, 10:00 AM

Dear Shawn, could I please ask for the latest e-sys, data files and instructions as a PM

Thank you!

shawnsheridan · 08-25-2013, 10:02 AM

Quote:

Originally Posted by carlos BMW

Dear Shawn, could I please ask for the latest e-sys, data files and instructions as a PM

Thank you!

You have to post an email or wait until you can receive PM's.

08-23-2013, 11:25 PM	#4423
seaa Registered 0 Rep 1 Posts Drives: f30 06/2013 Join Date: Aug 2013 Location: Singapore iTrader: (0)	Dear Shawn, I have an F30 316i Jun 2013 built. Would greatly appreciate if you could PM or email me at creati87@hotmail.com the link to the latest e-sys, data files and instructions. Thank you in advance!
	Appreciate 0 Quote

08-24-2013, 09:51 AM	#4427
amf Private First Class 9 Rep 149 Posts Drives: 2012 328i sport Join Date: Jul 2013 Location: H-Town (Houston, TX) iTrader: (0)	I have installed my e-sys 3.22.5 yesterday. I have connected my 328i 2012 f30 to my laptop. I have opened E-sys and connected all successful. Does anyone have a video on what to do next. I am not sure where to navigate to so I can turn off seat belt minder. A video or a phone call will help. Thanks Aaron Thanks
	Appreciate 0 Quote

08-24-2013, 10:57 AM	#4429
amf Private First Class 9 Rep 149 Posts Drives: 2012 328i sport Join Date: Jul 2013 Location: H-Town (Houston, TX) iTrader: (0)	Shawn, Thanks or the step by step. It helped and worked sort of. I am not able to get into ACSM modules. I can only connect to 1 of the 3 on my car. I am guessing the 3000 Ausstatftungsflags are in a module I cannot connect to. (trying to turn seat belt minder off) I get this message I cannot connect to FEM BODY similar message as above^^^^ I can connect to HU CIC and I was able to code the legal disclamer to be off. I am not sure what I am missing. Aaron Last edited by amf; 08-24-2013 at 11:02 AM..
	Appreciate 0 Quote

08-24-2013, 12:48 PM	#4431
amf Private First Class 9 Rep 149 Posts Drives: 2012 328i sport Join Date: Jul 2013 Location: H-Town (Houston, TX) iTrader: (0)	Thanks Shawn, Thanks to F30post.com too. I am able to sucessfully code my 328i f30 2012. If anyone in Houston TX needs some help let me know. I will try to help out. Aaron
	Appreciate 0 Quote

08-24-2013, 01:11 PM	#4434
amf Private First Class 9 Rep 149 Posts Drives: 2012 328i sport Join Date: Jul 2013 Location: H-Town (Houston, TX) iTrader: (0)	I coded my mirrors to fold with my key fob today. To fold my mirrors I have to hold the lock button down for a couple of seconds. Is there any way to have them fold with a press of the lock button instead of holding button down? Thanks
	Appreciate 0 Quote

08-25-2013, 05:40 AM	#4437
kneesliding Private 3 Rep 88 Posts Drives: BMW F31 320d Touring Join Date: May 2013 Location: Kaiserslautern Germany iTrader: (0)	So, copying video files from an NTFS USB stick to the internal hard drive doesnt work. Damn, cant work out why its not working.
	Appreciate 0 Quote

08-25-2013, 09:57 AM	#4442
legaleye3000 First Lieutenant 46 Rep 383 Posts Drives: 2014 328i; 2015 X3 Join Date: Sep 2012 Location: FL iTrader: (0)	Hi All- I was coding and for some reason when I'm using navigation, instead of showing directions in the HUD, it now shows below the speedometer. Anyone know how to fix this? 2012 F30. Thanks!
	Appreciate 0 Quote

08-25-2013, 10:00 AM	#4443
carlos BMW Registered 0 Rep 1 Posts Drives: BMW 430i Cabrio 2016 Join Date: Aug 2013 Location: Sweden iTrader: (0)	E-sys and data files Dear Shawn, could I please ask for the latest e-sys, data files and instructions as a PM Thank you!
	Appreciate 0 Quote