12-01-2023, 04:05 PM | #1 |
Registered
2
Rep 4
Posts |
NBT EVO ID6 APIX2 Touch Screen Retrofit Coding?
Hi Guys,
I’ve, replaced my NBT EVO ID4 head unit on my F30 with a ID6 head unit. I’ve coded it to the car using esys and activated CarPlay.etc I was a bit cheap and used my original APIX1 CID display and do get frequent black screens but it hasn’t bothered me. Recently I’ve had a good deal on a APIX2 Touchscreen unit from a junk yard. Before I fit it, could someone point me to what I need to code to get it to work. I've done a bit of research and have come up with this: CID_APIX_MODE=APIX2 CID_COM_MODE=MII CID_DISPLAY_RES=1280×480 CID_DISPLAY_SIZE=8.8 CID_TOUCH = aktiv CID_HMI_TOUCH = aktiv Does this look right? |
12-09-2023, 04:56 PM | #4 |
Lieutenant
288
Rep 539
Posts |
I did the same thing - have an Evo unit and originally used my original NBT display with voltage converter. I then bought a 10.25" screen from a G30 and managed to fit that in.
Your coding options should be good, but you'll also need to change the colour depth: CID_COLOR_DEPTH - will be 18 for your APIX1 screen, should be 24 for APIX2 screen That should take care of it. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|