| 04-24-2016, 05:36 PM | #1 |
|
Private First Class
 
137
Rep 139
Posts |
P0100 CEL
Today a CEL appeared. Auto Zone scanned the car and came up with code P0100 which indicates a fault in the Mass or Volume Air Flow sensor electrical circuit. I searched the forums here and at N54Tech for code P0100 but no results.
Car is a 2013 AH3 with 64,000. Installed JB4 early March and have driven roughly 1500 miles since the install. Been running Map 1 as I have no other mods. Hoping someone can point me where to look next.
__________________
2013 Active Hybrid 3 | M Sport | Alpine White | Coral Red | BM3 Stage 2 | ER FMIC | FabSpeed Catted DP | ER CP |
2016 F150 2021 RnineT 2022 K1600B Last edited by dougt.ah3; 04-24-2016 at 06:22 PM.. |
| 04-28-2016, 10:27 PM | #2 |
|
Private First Class
137
Rep 139
Posts |
Resolved.
The MAF sensor failed and was replaced.
__________________
2013 Active Hybrid 3 | M Sport | Alpine White | Coral Red | BM3 Stage 2 | ER FMIC | FabSpeed Catted DP | ER CP |
2016 F150 2021 RnineT 2022 K1600B |
|
Appreciate
4
|
| 04-29-2016, 01:32 PM | #3 |
|
Captain
 191
Rep 603
Posts |
Glad you got it fixed. For what it's worth you should be able to get the codes (and clear them) using the JB4.
__________________
- 2022 X3M Comp
- 2021 X5 xDrive 40i - 2018 F80 M3 (sold) |
|
Appreciate
0
|
| 04-29-2016, 01:57 PM | #4 |
|
BimmerPost Supporting Vendor
24199
Rep 190,807
Posts  |
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435  |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
