[jondaman]

Hi, Guys,
Please help a complete noob here for coding.
I got my coding cable last month but did not have any time to experiment until today. I am a bit nervous when connected to the car so no detail needs to be spared.
Thanks to Shawn, the installation and saving the file was pretty straight forward following his instruction. I have a pretty basic BMW F30 2013 with premium package and nothing else.

Besides that, I heard adding 2TB to the VO is also pretty awesome. Following the instruction provided to change VO/FA for a car, I deleted the 205 from the car and tried adding 2TB to it. However, when I click on the "Save" icon for the SALAPA-Element, I got an error "Invalid Input. [G305]".
Is there any prerequisites to adding 2TB to the VO that I do not have? The screen shot is attached so you can see my FAs.



Also, when changing VO from 6NH to 6NS or 6NK or 6NL to code EBT, do you delete the 6NH then adding the other VO or just change/modify it? Thanks for any help.

[kitster]

If your going from 6NH to 6NS, you need to remove 6NH. You can't have them both at the same time.

[chris88]

You have two ,, in you FA. SALAPA. Thats wrong.

[twincam23]

Originally Posted by chris88

You have two ,, in you FA. SALAPA. Thats wrong.

what he said.

[jondaman]

Originally Posted by chris88

You have two ,, in you FA. SALAPA. Thats wrong.

Gotcha, I was following the guide and there were two commas in the slide when the code were being added. On the next slide, it was changed to a single comma.
I will try that again tonight. Thanks.