[shawnsheridan]

Originally Posted by AntBabeee

Can i get that also? thanks.

PM sent.

[cedchung]

Originally Posted by kon

Which version of esys & psdzdata are you using, and the i-Level of your car? If I have to guess, you need new esys v3.22.5, psdzdata 48.3 and above, and a new est token

esys 3.18.4 and psdzdata 48.3. I need to check about the i-level but I suppose it is the latest one because the dealer just updated the car this week. I was able to code the car before.

[shawnsheridan]

Originally Posted by cedchung

esys 3.18.4 and psdzdata 48.3. I need to check about the i-level but I suppose it is the latest one because the dealer just updated the car this week. I was able to code the car before.

You need to update. PM sent.

[Frogman]

Originally Posted by jsbmw87

Hey guys,

Think I need the newest data/program. Just got my car back from the dealership and they installed new software (BMW logo appears in driver console after shutting the car off, this is the newest software I think?) They said they had to do it because of recall "B61 36 12"... Googled it a bit and didn't find much.

Is there a way I can find out which software version my car is definitely using?

Anyway, a new download link would be appreciated.

Thanks!

I got that update too when they changed my oil at 15K last week. They updated me to F020-12-11-504 which needs ISTA/P 2.48.2 (That SIB updated the FEM to correct some faults with the fans and wipers).

Mine is a 2012, they may update 2013's to F020-12-11-505 which will require 2.48.3.

The only way to tell what version you have is to connect to it with E-Sys.

Here's how (courtesy of Shawn): http://www.f30post.com/forums/showpo...postcount=1403

I suggest PM'ing Shawn for links.

[shawnsheridan]

Originally Posted by Frogman

I got that update too when they changed my oil at 15K last week. They updated me to F020-12-11-504 which needs ISTA/P 2.48.2 (That SIB updated the FEM to correct some faults with the fans and wipers).

Mine is a 2012, they may update 2013's to F020-12-11-505 which will require 2.48.3.

The only way to tell what version you have is to connect to it with E-Sys.

Here's how (courtesy of Shawn): http://www.f30post.com/forums/showpo...postcount=1403

I suggest PM'ing Shawn for links.

Dealers have only one version of ISTA/P at any one time, and they update every model year car with whatever version they are running at that point in time.

[kon]

Booked my car in next Sat, and the SA already told me I'm going to get the March 2013 update which they are in the midst of installing... probably the v49 for me?

F020-13-03-501

[ykau]

wow!! Despite the new car curbing policy, Kon you changed car again! Rich man deh.

Originally Posted by kon

Booked my car in next Sat, and the SA already told me I'm going to get the March 2013 update which they are in the midst of installing... probably the v49 for me?

F020-13-03-501

[vkoprivica]

Hi, I am the owner of f30 who is interested to change default hvac behavior. Currently my car remembers last temperature setting but not the on/off state. Every time when I start the engine, hvac turns on even though I left it off last time before I turned the engine off. I was wondering if there is a way to make computer remembers a last hvac on/off setting.

Thank you.

[kon]

Originally Posted by vkoprivica

Hi, I am the owner of f30 who is interested to change default hvac behavior. Currently my car remembers last temperature setting but not the on/off state. Every time when I start the engine, hvac turns on even though I left it off last time before I turned the engine off. I was wondering if there is a way to make computer remembers a last hvac on/off setting.

Thank you.

Yes - IHKA module 3000 OFF_MEMORY, set to aktiv

[vkoprivica]

Could changing this setting on my own void the warranty of the car?

[kon]

Originally Posted by vkoprivica

Could changing this setting on my own void the warranty of the car?

We are not dealer, so we can't advice, but as with any mod, do at your own risk.

But if my dealer going to tell me the warranty is void because I switch off my aircon, I'm pretty sure a hammer or spanner will be up their arse

[vkoprivica]

Thank you.

[Merlinx1]

Hi guys i'm trying to code something and everything is ok except when I click "code". It reports me this message:

What should I do?? It give me the same errors trying to code anything so I don't think it depends on what I'm trying to code...

[e70ist]

Is it possible to code a non comfort access 328i to have comfort access? Of course after all hardware swapping.

[WildClyde]

I have E-Sys-3.22.5 with the personalized token. I downloaded PSdZData-48.3 and do not find data for F30. Which version of PSdZData covers the F30? Please send a link. TIA

[grunt72]

Wow u guys are indeed knowledgeable abt the coding for the BMW usage systems. Am expecting my new 316i to drop and would also like to find out more of what can be customised esp the ASS and the aircon as most people do. Any local boys (SG) can help? Thx a bunch

[Frogman]

Originally Posted by WildClyde

I have E-Sys-3.22.5 with the personalized token. I downloaded PSdZData-48.3 and do not find data for F30. Which version of PSdZData covers the F30? Please send a link. TIA

The F30 codes as the F020. You should be good to go as-is.

[shawnsheridan]

Originally Posted by Merlinx1

Hi guys i'm trying to code something and everything is ok except when I click "code". It reports me this message:
...
What should I do?? It give me the same errors trying to code anything so I don't think it depends on what I'm trying to code...

Which version of E-Sys and PSdZData are you using?

Were you FDL Coding or VO Coding? If FDL Coding, is your EST Token installed in E-Sys?

Lastly, try setting your Windows Regional and Language options to English U.S.

[shawnsheridan]

Originally Posted by 328fresh

Is it possible to code a non comfort access 328i to have comfort access? Of course after all hardware swapping.

If you add the hardware, the you should be able to just add S322A Comfort Access to your VO and VO Code CAS module.

[Merlinx1]

Originally Posted by shawnsheridan

Which version of E-Sys and PSdZData are you using?

Were you FDL Coding or VO Coding? If FDL Coding, is your EST Token installed in E-Sys?

Lastly, try setting your Windows Regional and Language options to English U.S.

I'm using E-Sys 3.18.4 with PSdZData 48.3
I think I pressed the "code" button instead of "code fdl" I'm not sure...
Anyway EST is installed....

What's the difference between coding FDL or VO? I see two buttons: CODE and CODE FDL. Is the non FDL just the VO option?

I'll retry being sure to hit code fdl.
And will try also to change the region option of windows!
Many thanks!

[shawnsheridan]

Originally Posted by Merlinx1

I'm using E-Sys 3.18 with PSdZData 48.3
I think I pressed the "code" button instead of "code fdl" I'm not sure...
Anyway EST is installed....

I'll retry being sure to hit code fdl.
And will try also to change the region option of windows!
Many thanks!

You can not use E-Sys 3.18.4 and F20 48.3 PSdZdata with Code Away.EST. This has been discussed ad nauseam. If you want to use 48.3, you must get a new Patch / Token, which means you might as well update to E-Sys 3.22.5 at the same time.

[Merlinx1]

Originally Posted by shawnsheridan

You can not use E-Sys 3.18.4 and F20 48.3 PSdZdata with Code Away.EST. This has been discussed ad nauseam. If you want to use 48.3, you must get a new Patch / Token, which means you might as well update to E-Sys 3.22.5 at the same time.

Sorry it's first time I try to code and it's very difficult at the beginning.. Can you link me any discussion about it?
Anyway I have version 3.22.5 too. What should I do? Install this version using the same PSdZData?
Or do I have to get this new Patch/Token?And what's exactly this?Where Can I find it?

Or sould i get other PSdZData? Where to find?

Again sorry for all the questions