[shawnsheridan]

Originally Posted by vkoprivica

Does anyone know where I can find 48.2 PSdZData download?

PM sent.

[shawnsheridan]

Originally Posted by roastbeef69

Sean, if you could PM me on how to get a code I'd appreciate it. I just took delivery of a 335i M-Sport I ordered in Feb, I've already got a cable, I just need to figure out the process now. :-)
Thanks,
-Rob (Austin,TX)

I can't PM you, as you have only 1 Post. Increase your Post count, or put up an email address.

[six]

Hi

I wonder if somebody would be kind enough to PM with the download details and how to get a token.

Also will the required software run on Windows 8 or is it 7 / XP only?

Many thanks

[simonchs]

Originally Posted by six

Hi

I wonder if somebody would be kind enough to PM with the download details and how to get a token.

Also will the required software run on Windows 8 or is it 7 / XP only?

Many thanks

E-sys works well on both XP/7/8

[roastbeef69]

Originally Posted by shawnsheridan

I can't PM you, as you have only 1 Post. Increase your Post count, or put up an email address.

I'm sorry... it's rob@robamy.com
Thanks,
-Rob

[demge01]

Could someone confirm the steps required to upload a pre modified (edited) CAF file please?
Or direct me if its been covered. Thanks.

[shawnsheridan]

Originally Posted by six

Hi

I wonder if somebody would be kind enough to PM with the download details and how to get a token.

Also will the required software run on Windows 8 or is it 7 / XP only?

Many thanks

PM sent.

[shawnsheridan]

Originally Posted by roastbeef69

I'm sorry... it's rob@robamy.com
Thanks,
-Rob

Email sent.

[DVC]

Originally Posted by jgonzal

If you want to be able to fold the mirrors at any speed, I think you need to change:

FRM>3020 FRM_SPIEGEL_PARAMETER, 10>ASP_MAX_GESCHWINDIGKEIT_BEIKLAPPEN

The default is werte 14, which I believe is equivalent to 20 Km/Hr. Above that speed you cannot fold the mirrors. I have not tried this, but if you change that value to FF you might be able to fold at any speed.

One potential problem is that the mirrors unfold automatically at 40 Km/Hr. To get around that you might have to change:

FRM>3020 FRM_SPIEGEL_PARAMETER, 10>ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN

The default is to unfold at 40 Km/Hr (Hex (werte) value of 28). You might also want to change this one to FF.

By the way, if anybody wants to automatically "unfold" their mirrors at a speed lower that 40 Km/Hr (25 MPH), just change the last werte parameter to a lower value (for example 6 or 7).

Thanks!

[six]

Originally Posted by simonchs

E-sys works well on both XP/7/8

Good to know, thank you

[six]

Originally Posted by shawnsheridan

PM sent.

Thank you very much, received and understood

[UhhItsANT]

Originally Posted by SergioK

This has not been confirmed... according to the latest coding spreadsheet.

Fembody 3050 HELLIGKEIT_DRL

can you send me the latest coding spreadsheet? or post a link to it. Thanks.

[nicoverca]

Originally Posted by ilhan1103

A few people (can't locate their posts) have been asking about opening the tailgate w/o unlocking doors.

Correct me if I'm wrong but this is a default option here on my car (Belgium, thats EU for you yankees )
idrive -> settings -> locks -> second option available iirc


Also I'd love it if anyone can send me the links for esys as well. I probably cant receive PM yet so here's my mail (laraake@'remove'gmail.com)


Last but not least, any Belgians/Dutchmen/Germans who could help me coding? I live close to Aachen, but willing to drive around abit

Hi ihan and all of you other fellow forum fellas.

I'm from Belgium, near Antwerp, and i receive my F30 in july.
I would really really like to code some things in, but it's new for me.

Since i do not have enough posts, i would really like to receive the links to the software & other via email (vercauterenn@gmail.com)

If there is someone who would like to catch up trough skype to help me out, feel free to send me an email with your skype name

All very much appreciated!!
PS: I have an Engineering Degree in IT, so i might (if i get used to or know the logic to coding be of added value to this thread). But not right now.. if you let me code right now i would break your car.. or let Pac-Man pass by.. or just ask for batman's help.. really.. do not give me a coding cable now.. that would be.. yeah.. awkward..

[shawnsheridan]

Originally Posted by nicoverca

Hi ihan and all of you other fellow forum fellas.

I'm from Belgium, near Antwerp, and i receive my F30 in july.
I would really really like to code some things in, but it's new for me.

Since i do not have enough posts, i would really like to receive the links to the software & other via email (vercauterenn@gmail.com)

If there is someone who would like to catch up trough skype to help me out, feel free to send me an email with your skype name

All very much appreciated!!
PS: I have an Engineering Degree in IT, so i might (if i get used to or know the logic to coding be of added value to this thread). But not right now.. if you let me code right now i would break your car.. or let Pac-Man pass by.. or just ask for batman's help.. really.. do not give me a coding cable now.. that would be.. yeah.. awkward..

PM sent.

[DXL XLR8]

Originally Posted by shawnsheridan

They should roll up, but after a delay from the front ones. As noted in my post two posts up, the delay is controlled by:

KMFRT_OEFF_HINTEN = Werte 00 - Delay between front and rear windows on Opening

It's not a delay, the back just won't roll up nor down. I double check and all the codes via the cheat sheet were coded properly. I have a video of it here.

[shawnsheridan]

Originally Posted by DXL XLR8

It's not a delay, the back just won't roll up nor down. I double check and all the codes via the cheat sheet were coded properly. I have a video of it here.

Very strange. Is the rear window locks turned on? If not that, then maybe a fuse.

I would also try resetting (VO Code) FEM_BODY, and checking to see if the rear windows at least roll down, just to rule out coding as the problem.

They should roll down from the factory, so if yours are not, and you can't figure it out, it should be covered by dealer under warranty.

[luvbirds22]

hey coding gurus!

can anyone please provide me with the coding required in various ecu's in order to go from non xenon to xenon.further can anyone with factory xenon,non adaptive give me copy in .ncd format of FEM_BODY ECU and HU-CIC ECU ,I want to match your file with mine.your help will be greatly appreciated.

[shawnsheridan]

Originally Posted by luvbirds22

hey coding gurus!

can anyone please provide me with the coding required in various ecu's in order to go from non xenon to xenon.further can anyone with factory xenon,non adaptive give me copy in .ncd format of FEM_BODY ECU and HU-CIC ECU ,I want to match your file with mine.your help will be greatly appreciated.

You should not have to hunt down the FDL Codes. Add S522A XENON-LIGHT to the VO and then VO Code FEM_BODY.

[DXL XLR8]

Originally Posted by shawnsheridan

Very strange. Is the rear window locks turned on? If not that, then maybe a fuse.

I would also try resetting (VO Code) FEM_BODY, and checking to see if the rear windows at least roll down, just to rule out coding as the problem.

They should roll down from the factory, so if yours are not, and you can't figure it out, it should be covered by dealer under warranty.

By VO coding you mean

Connect => Read FA => Activate FA => Read VCM => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE?

[shawnsheridan]

Originally Posted by DXL XLR8

By VO coding you mean

Connect => Read FA => Activate FA => Read VCM => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE?

Yes.

[luvbirds22]

Originally Posted by shawnsheridan

You should not have to hunt down the FDL Codes. Add S522A XENON-LIGHT to the VO and then VO Code FEM_BODY.

thank u so much for ur reply coding genius shawnsheridan.i just have the xenon headlights without auto levelling sensors installed,would VO coding the ECU FEM_BODY as whole be ok?

[shawnsheridan]

Originally Posted by luvbirds22

thank u so much for ur reply coding genius shawnsheridan.i just have the xenon headlights without auto levelling sensors installed,would VO coding the ECU FEM_BODY as whole be ok?

I am not sure. I would take a snapshot of your FEM_BODY coding before and after adding 522 and coding it, and then only if you have an error code afterwards, compare the before and after .NCD files to see exactly which FDL Codes changed, and look for one to disable the auto leveling.

In particular, I would go back and try setting FEM_BODY => C_BLC_ENA = F030disable, which should disable Adaptive Head Lights (AHL).