[kromix]

Originally Posted by dmnc02

I am assuming that this is a US-spec F30 with the non-adaptive LEDs.

If so, the easiest way to change the halo rings to 100% when used as position lights is to set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 04, 00, 00, 00.

To change them to 60% instead, set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 0F, 00, 00, 00

and then code

LmmIdx15_Intensity = 3C
LmmIdx15_Priority = 03

(edit the Werte values directly) in both FLEs.

So this work for a US Spec 2016 340i?

And what does "used as position lights mean?" Is that in the Auto Setting?

[howiegu]

Originally Posted by phattbam

taking a side step but does anyone know if you can turn up the eyebrows to 100% to match that of the rings while used for DRLs?

You can't for 340s. The "eye brows" are turn signals now.

[kromix]

Just did mine, it works!!! Check the before and after shot:


Side question for @dmnc02

Seems like you are well versed in coding FLE, can you help disable the side markers those yellow lights? I can't figure it out....

[zaki671]

@kromix - Is it not the same as the 335i? If not, please disregard.

FEM_BODY_3063_MAPPING_SIDEMARKER_L_OUTPUT - Turns off the left front side-marker.
FEM_BODY_3063_MAPPING_SIDEMARKER_R_OUTPUT - Turns off the right front side-marker.

[phattbam]

Originally Posted by howiegu

You can't for 340s. The "eye brows" are turn signals now.

how about '15 335i?

[kromix]

Originally Posted by zaki671

@kromix - Is it not the same as the 335i? If not, please disregard.

FEM_BODY_3063_MAPPING_SIDEMARKER_L_OUTPUT - Turns off the left front side-marker.
FEM_BODY_3063_MAPPING_SIDEMARKER_R_OUTPUT - Turns off the right front side-marker.

Nope, cause the sidemarkers on the LED headlamp assembly are different and we have different ECU's (FLE)

[zaki671]

Originally Posted by kromix

Nope, cause the sidemarkers on the LED headlamp assembly are different and we have different ECU's (FLE)

I stand corrected.

[myszano1]

Originally Posted by dmnc02

I am assuming that this is a US-spec F30 with the non-adaptive LEDs.

If so, the easiest way to change the halo rings to 100% when used as position lights is to set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 04, 00, 00, 00.

To change them to 60% instead, set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 0F, 00, 00, 00

and then code

LmmIdx15_Intensity = 3C
LmmIdx15_Priority = 03

(edit the Werte values directly) in both FLEs.

hi there.
It's possible to code f30 UK Spec. to 100% or 80% led halo lights when headlights are on ?

[matteis]

Originally Posted by dmnc02

Yes, the fact that it is a F20 rather than F30 definitely makes a difference.

Assuming that you have not coded any other car after the 120i, the relevant NCD is the file named CAFD_000024C3_xxx_xxx_xxx.ncd in your C:\Data\CAF directory.

So, in a 2016 F20 (125i M), what are the values do I need to chenge to get halo 100% with lowbeans?

I have this CAFD: CAFD_000024C3_008_005_000.ncd

TKs dmnc02 to have pointed me to this thread

[dmnc02]

I have been away from the forum for a few weeks. Below are some late replies.

Originally Posted by kromix

So this work for a US Spec 2016 340i?

And what does "used as position lights mean?" Is that in the Auto Setting?

Yes, it works for the 2016 340i. "Used as position lights" means used in conjunction with the low beams rather than as DRLs.

Originally Posted by kromix

Just did mine, it works!!! Check the before and after shot:


Side question for @dmnc02

Seems like you are well versed in coding FLE, can you help disable the side markers those yellow lights? I can't figure it out....

The easiest way is to change LM_ID_LT04 and LM04_Name to F020Wert=00.

Originally Posted by myszano1

hi there.
It's possible to code f30 UK Spec. to 100% or 80% led halo lights when headlights are on ?

Yes, it is.

Originally Posted by matteis

So, in a 2016 F20 (125i M), what are the values do I need to chenge to get halo 100% with lowbeans?

I have this CAFD: CAFD_000024C3_008_005_000.ncd

TKs dmnc02 to have pointed me to this thread

Hard to tell without seeing the FLE NCD file. Post yours and I will take a look.

[matteis]

Originally Posted by dmnc02

Hard to tell without seeing the FLE NCD file. Post yours and I will take a look.

I tried do read FLE ECU today (2016 F20 125i M) and got a error message: "CAFD file not found"

CAFD_000024C3_008_005_000

What can I do?

[dmnc02]

Originally Posted by matteis

I tried do read FLE ECU today (2016 F20 125i M) and got a error message: "CAFD file not found"

CAFD_000024C3_008_005_000

What can I do?

It looks like that particular CAFD is not in the most recent PSdZData. You could ask Shawn if he happens to have it or you could simply inject a newer CAFD.

[White340]

Just did this and it worked for me!

Before/After pics:

[kromix]

Nice! Do a side by side night pic if u can :P

[phattbam]

What happened to the eye brows

[White340]

Originally Posted by kromix

Nice! Do a side by side night pic if u can :P

I already coded it, but I can just take one at night and post it against another pic of someone who doesn't have it coded.

[White340]

Originally Posted by phattbam

What happened to the eye brows

I think the eyebrows on the LCI are only used as turn signals.

[phattbam]

Originally Posted by White340

I think the eyebrows on the LCI are only used as turn signals.

I want that feature for my pre-LCI MY15

[dmnc02]

Originally Posted by phattbam

I want that feature for my pre-LCI MY15

If you don't want the eyebrows on, just code them off.

[phattbam]

Originally Posted by dmnc02

If you don't want the eyebrows on, just code them off.

I'd like to use them as my signal lights. But maybe code them off would look nicer. I usually leave the switch on auto. Variable light so it turns with my steering wheel

[dmnc02]

Originally Posted by phattbam

I'd like to use them as my signal lights. But maybe code them off would look nicer. I usually leave the switch on auto. Variable light so it turns with my steering wheel

You can turn them off as position lights but still use them as signal lights.

In TMS, change both Standlicht Modus 1 and Modus 2 to

00, 03, 00, 00, 64, 03, 00, 00, 00, 03, 00, 00, 2E, 04, 00, 00.

Do the same change in Welcome Light 1 if you don't want to have them turn on with the welcome lights either.

[matteis]

Originally Posted by dmnc02

It looks like that particular CAFD is not in the most recent PSdZData. You could ask Shawn if he happens to have it or you could simply inject a newer CAFD.

dmnc02

I got missed CAF file. Here is an image showing how it looks like:



I'd like to have 100% Angel eyes intensity with low beam. What parameters do I have to change?