09-04-2013, 05:58 AM | #2 |
Second Lieutenant
176
Rep 202
Posts |
I run 19x9.5 +38 in the rear, and am about 4mm outside of flush (no drop on the car).
So your 19x9.5 +33 rear is not really "the boring, typical" fitment. It is very aggressive. And 19x11 +25? Don't even think about it. Your car will look like a top fuel eliminator. Matt |
Appreciate
0
|
09-04-2013, 01:15 PM | #3 |
Lieutenant Colonel
301
Rep 1,591
Posts |
19 x 9.5 + 30 is a bit too aggressive IMO. 19 x 9 +30 wouldn't be bad in the front or if square then like 19 x 9.5 +38 or +35ish maybe.
__________________
-JustinNApproved
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|