[general31]

Hello everyone,

I have a EU version Bmw which had codded USA version sidemarkers and mirrors by previous owner.

I did close sidemarkers option from Bimmercode and reverted to default, no problem with that.

I have a problem with side mirrors, I can't convert it to the original no matter what I tried. It is not blinking when I signaling. It stays steady at night(not blinks with signals)

Does anyone know the default code?


Thanks in advance.

[TheNine90]

MAPPING_BLINKEN_Z_L_OUTPUT -> fra_z_l 10 (DoorMirror Blinker L)
MAPPING_BLINKEN_Z_L_FUNCTION -> blinken_l 06 (Blinker L)
MAPPING_BLINKEN_Z_L_PWM_LEVEL_1 -> 100%
MAPPING_BLINKEN_Z_L_FIXED_PWM -> fixed
MAPPING_BLINKEN_Z_L_DIMMED -> 0
MAPPING_BLINKEN_Z_L_PART_OF_WL -> 00
MAPPING_BLINKEN_Z_L_PRIORITY -> 1

MAPPING_BLINKEN_Z_R_OUTPUT -> fra_z_l 11 (DoorMirror Blinker R)
MAPPING_BLINKEN_Z_R_FUNCTION -> blinken_r 07 (Blinker R)
MAPPING_BLINKEN_Z_R_PWM_LEVEL_1 -> 100%
MAPPING_BLINKEN_Z_R_FIXED_PWM -> fixed
MAPPING_BLINKEN_Z_R_DIMMED -> 0
MAPPING_BLINKEN_Z_R_PART_OF_WL -> 00
MAPPING_BLINKEN_Z_R_PRIORITY -> 1

This is the default values for the side mirror lights. Try this using Bimmercode but I recommend using Esys to VO code the FEM since it will sort out the default values automatically

[general31]

Originally Posted by TheNine90

MAPPING_BLINKEN_Z_L_OUTPUT -> fra_z_l 10 (DoorMirror Blinker L)
MAPPING_BLINKEN_Z_L_FUNCTION -> blinken_l 06 (Blinker L)
MAPPING_BLINKEN_Z_L_PWM_LEVEL_1 -> 100%
MAPPING_BLINKEN_Z_L_FIXED_PWM -> fixed
MAPPING_BLINKEN_Z_L_DIMMED -> 0
MAPPING_BLINKEN_Z_L_PART_OF_WL -> 00
MAPPING_BLINKEN_Z_L_PRIORITY -> 1

MAPPING_BLINKEN_Z_R_OUTPUT -> fra_z_l 11 (DoorMirror Blinker R)
MAPPING_BLINKEN_Z_R_FUNCTION -> blinken_r 07 (Blinker R)
MAPPING_BLINKEN_Z_R_PWM_LEVEL_1 -> 100%
MAPPING_BLINKEN_Z_R_FIXED_PWM -> fixed
MAPPING_BLINKEN_Z_R_DIMMED -> 0
MAPPING_BLINKEN_Z_R_PART_OF_WL -> 00
MAPPING_BLINKEN_Z_R_PRIORITY -> 1

This is the default values for the side mirror lights. Try this using Bimmercode but I recommend using Esys to VO code the FEM since it will sort out the default values automatically

Thanks a lot ! It worked