▀▄ eas | DIY: LCI Taillight Upgrade for F30 3-Series

atzebmw · 03-30-2017, 03:32 PM

Quote:

Originally Posted by Aarie

Great DIY.

I purchased the BMW OEM harness for the F30 LCI tail light retrofit. The harness allows for the left and right inner turn signals to plug directly into the REM.

Can some provide the REM FDL coding that is required for these lights to work via the REM?

Thanks

The best way is to insert the HO-Word "HELC" to the VO and to code the REM with it.

Aarie · 03-30-2017, 04:08 PM

Quote:

Originally Posted by atzebmw

The best way is to insert the HO-Word "HELC" to the VO and to code the REM with it.

Thanks for the quick response.

I tried to add HO-Wort=HELC, but get an error when I calculate FP.

PSdZ Error "No FP could be generated from FA" (C002)
Not all elements of the FA were found in the FA2FP: HO-Word HELC (72)

Could my PSdZ files be too old?

Thanks

atzebmw · 03-30-2017, 04:21 PM

Quote:

Originally Posted by Aarie

Thanks for the quick response.

I tried to add HO-Wort=HELC, but get an error when I calculate FP.

PSdZ Error "No FP could be generated from FA" (C002)
Not all elements of the FA were found in the FA2FP: HO-Word HELC (72)

Could my PSdZ files be too old?

Thanks

I think the software of your car is too old.
OK, so you have to change all values manually.

REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_PWM_LEVEL_1 = 100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_PWM_LEVEL_1 = 100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_FIXED_PWM = fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_FIXED_PWM = fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_L_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_R_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_6_OUTPUT = sl_2_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_7_OUTPUT = sl_2_r
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_8_OUTPUT = bfd_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_9_OUTPUT = bfd_r
REM_01 > LceOutputChannels 3061 > BFD_L_CCM = ccm_blinker_l
REM_01 > LceOutputChannels 3061 > BFD_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_L_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BFD_R_CCM = ccm_blinker_r
REM_01 > LceOutputChannels 3061 > BFD_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_R_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_L_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_WARMUEBERWACHUNG = aktiv [Default]
REM_01 > LceOutputChannels 3061 > FRA_H_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_WARMUEBERWACHUNG = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_L_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_CCM = NEW_ccm_nsl_r
REM_01 > LceOutputChannels 3061 > NSL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_R_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > RFS_L_CCM = NEW_ccm_rfs_l
REM_01 > LceOutputChannels 3061 > SL_2_L_CCM = Fxx_ccm_sl_2_l
REM_01 > LceOutputChannels 3061 > SL_2_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_2_R_CCM = Fxx_ccm_sl_2_r
REM_01 > LceOutputChannels 3061 > SL_2_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_R_IS_LED = aktiv

Aarie · 03-31-2017, 03:12 AM

Thank you "atzebmw". I updated all values manually and the inner indictor lights are working.

Great help!!!

palomino05 · 05-15-2017, 03:06 PM

Quote:

Originally Posted by tom @ eas

Quote:

Originally Posted by F30_335

I have rear fog lamp button from factory.
I meant maybe if I have rear fog lamp, coding is different. Without coding, I have blinking in 3 place. Now only stop lamp blinking.

Just performed another install earlier this week with the coding steps as outlined above. No issues on this end.

What's the price on these installed ?

Levanius · 06-23-2017, 02:36 AM

Should I disconnect positive/negative cable from battery??

BeeEyez · 09-22-2017, 03:11 PM

Quote:

Originally Posted by tom @ eas

Coding

Coding is necessary in order to keep errors from appearing when new taillights are installed.

REM Module
REM -> BFD_L_IS_LED: aktiv / Werte=01
REM -> BFD_R_IS_LED: aktiv / Werte=01

REM -> FRA_H_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> FRA_H_R_IS_LED: aktiv / Werte=01
REM -> FRA_H_L_IS_LED: aktiv / Werte=01

REM -> NSL_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> NSL_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_R_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_KALTUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_R_WARMUEBERWACHUNG: nicht_aktiv / Werte=00
REM -> RFS_L_WARMUEBERWACHUNG: nicht_aktiv / Werte=00

REM -> RFS_L_IS_LED: aktiv / Werte=01
REM -> RFS_R_IS_LED: aktiv / Werte=01

Install is complete. Please comment if this guide helped you or if any of the steps need a bit more detailed explanation.

Does this coding work the same for f32's? or is it different completely?

tom @ eas · 09-22-2017, 03:27 PM

Quote:

Originally Posted by BeeEyez

Does this coding work the same for f32's? or is it different completely?

Adding HELC to your VO and coding REM will work for F32/F82. It's touched upon lightly in this thread: http://f80.bimmerpost.com/forums/sho....php?t=1404489

zaynn786 · 10-05-2017, 12:45 PM

Is the procedure the same if you use the original OEM BMW retrofit harness?

tom @ eas · 10-05-2017, 12:46 PM

Quote:

Originally Posted by zaynn786

Is the procedure the same if you use the original OEM BMW retrofit harness?

Install steps will be slightly different, coding is same.

zaynn786 · 10-05-2017, 03:38 PM

Quote:

Originally Posted by tom @ eas

Install steps will be slightly different, coding is same.

Tried retrofitting this and stupidly unplugged a module from the R.E.M and forgot to plug it back in. Shut the boot and now cannot open the boot. Think it was the A174*13B. Now I'm locked out the boot

what do I do?

tom @ eas · 10-05-2017, 03:42 PM

Quote:

Originally Posted by zaynn786

Tried retrofitting this and stupidly unplugged a module from the R.E.M and forgot to plug it back in. Shut the boot and now cannot open the boot. Think it was the A174*13B. Now I'm locked out the boot

what do I do?

This might help: http://f80.bimmerpost.com/forums/sho....php?t=1410407

zaynn786 · 10-06-2017, 10:42 AM

Quote:

Originally Posted by tom @ eas

This might help: http://f80.bimmerpost.com/forums/sho....php?t=1410407

Glad I'm not the only one whose been locked out lol. In the UK I don't think we have the emergency release. Ended up taking the car to the dealer mid retrofitting and asked them to get it open somehow. See what solution they come up with.

zaynn786 · 10-09-2017, 12:51 PM

Quote:

Originally Posted by zaynn786

Glad I'm not the only one whose been locked out lol. In the UK I don't think we have the emergency release. Ended up taking the car to the dealer mid retrofitting and asked them to get it open somehow. See what solution they come up with.

Dealers had to get in through rear seat lol, bummed mme with labour. Fitted lights but inner blinkers are not working. Do I need to VO code?

tom @ eas · 10-09-2017, 12:53 PM

Quote:

Originally Posted by zaynn786

Dealers had to get in through rear seat lol, bummed mme with labour. Fitted lights but inner blinkers are not working. Do I need to VO code?

No need to VO code for F30, just follow the steps outlined in the OP.

FZainol · 12-09-2017, 08:42 AM

Hi i leave in Malaysia, interested with the LCI Tail light, do u have it in EU version as my blinker are not red.
PLease pm price. Many thanks

tom @ eas · 12-11-2017, 11:52 AM

Quote:

Originally Posted by FZainol

Hi i leave in Malaysia, interested with the LCI Tail light, do u have it in EU version as my blinker are not red.
PLease pm price. Many thanks

We only offer US version (red).

Kailec · 05-25-2018, 03:16 PM

Quick question guys, just did this to my car but when I looked at:

MAPPING_BRAKEFORCED_L_PWM_LEVEL_1 = 100% [Default]
MAPPING_BRAKEFORCED_R_PWM_LEVEL_1 = 100% [Default]

There was only an option for voltage changes. It was at 11V or something. I left it as is, is this okay? Or was I supposed to adjust the Werte? That was at 85.

320d lucky · 06-11-2018, 08:49 AM

I want to raise the voltage of the LCI indicator, but I do not understand the code. Please give me guidance.

atzebmw · 06-11-2018, 09:32 AM

Quote:

Originally Posted by 320d lucky

I want to raise the voltage of the LCI indicator, but I do not understand the code. Please give me guidance.

REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_PWM_LEVEL_1 = 100% or 13.7V
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_PWM_LEVEL_1 = 100% or 13.7V

sphynx · 11-08-2018, 06:14 AM

Hey atzebmw, I did the manual coding you said on my F31. Inner blinkers are working on lock/unlock and emergency perfectly. One issue is with the left blinker. After one blink it gets a failure on computer. The right is working fine.

atzebmw · 11-08-2018, 08:20 AM

Quote:

Originally Posted by sphynx

Hey atzebmw, I did the manual coding you said on my F31. Inner blinkers are working on lock/unlock and emergency perfectly. One issue is with the left blinker. After one blink it gets a failure on computer. The right is working fine.

I just looked at the values from above and I think I have discovered a mistake.

REM_01 > LceOutputChannels 3061 > FRA_H_L_WARMUEBERWACHUNG = aktiv [Default]
and
REM_01 > LceOutputChannels 3061 > FRA_H_R_WARMUEBERWACHUNG = aktiv [Default]
have to set to nicht_aktiv.

In general, you can say that all values with KALTUEBERWACHUNG or WARMUEBERWACHUNG have to set to nicht_aktiv.

03-31-2017, 03:12 AM	#48
Aarie New Member 0 Rep 14 Posts Drives: M-Performance Edition Join Date: Oct 2014 Location: South Africa iTrader: (0)	Thank you "atzebmw". I updated all values manually and the inner indictor lights are working. Great help!!!
	Appreciate 0 Quote

06-23-2017, 02:36 AM	#50
Levanius Enlisted Member 8 Rep 45 Posts Drives: F30 20d M Pack Join Date: May 2017 Location: Spain iTrader: (0)	Should I disconnect positive/negative cable from battery??
	Appreciate 0 Quote

10-05-2017, 12:45 PM	#53
zaynn786 New Member 15 Rep 29 Posts Drives: F30 XDrive 335d Join Date: Mar 2017 Location: Newcastle upon Tyne iTrader: (0)	Is the procedure the same if you use the original OEM BMW retrofit harness?
	Appreciate 0 Quote

12-09-2017, 08:42 AM	#60
FZainol New Member 0 Rep 12 Posts Drives: E90 320d Join Date: Aug 2014 Location: Malaysia iTrader: (0)	Hi i leave in Malaysia, interested with the LCI Tail light, do u have it in EU version as my blinker are not red. PLease pm price. Many thanks
	Appreciate 0 Quote

05-25-2018, 03:16 PM	#62
Kailec Lieutenant Colonel 595 Rep 1,953 Posts Drives: 2013 328i xDrive Join Date: Apr 2017 Location: Toronto, ON iTrader: (0) Garage List 2013 328i xDrive [0.00]	Quick question guys, just did this to my car but when I looked at: MAPPING_BRAKEFORCED_L_PWM_LEVEL_1 = 100% [Default] MAPPING_BRAKEFORCED_R_PWM_LEVEL_1 = 100% [Default] There was only an option for voltage changes. It was at 11V or something. I left it as is, is this okay? Or was I supposed to adjust the Werte? That was at 85.
	Appreciate 0 Quote

06-11-2018, 08:49 AM	#63
320d lucky Registered 0 Rep 2 Posts Drives: Ｆ３１ Join Date: Jun 2018 Location: Japan iTrader: (0)	I want to raise the voltage of the LCI indicator, but I do not understand the code. Please give me guidance.
	Appreciate 0 Quote

11-08-2018, 06:14 AM	#65
sphynx New Member 0 Rep 7 Posts Drives: BMW F31 2014 Join Date: Dec 2017 Location: Lithuania iTrader: (0)	Hey atzebmw, I did the manual coding you said on my F31. Inner blinkers are working on lock/unlock and emergency perfectly. One issue is with the left blinker. After one blink it gets a failure on computer. The right is working fine.
	Appreciate 0 Quote