Exhaust valve 328i

TEAShea · 05-06-2012, 08:17 AM

Dr. Christophe Lutterman of BMW said that the actuation of the valve varies with the driving mode control.

I disconnected the valve in my car and wired it in the open position. This only made a slight difference so I did some additional exhaust modifications to make it louder.

Alexc360 · 05-06-2012, 08:52 AM

Quote:

Originally Posted by TEAShea

Dr. Christophe Lutterman of BMW said that the actuation of the valve varies with the driving mode control.

I disconnected the valve in my car and wired it in the open position. This only made a slight difference so I did some additional exhaust modifications to make it louder.

Was it easy to disconnect and lock the valve in the open position? What else did you do to the exhaust, and did it make a noticeable difference?

justinnum1 · 05-06-2012, 09:11 AM

Quote:

Originally Posted by TEAShea

Dr. Christophe Lutterman of BMW said that the actuation of the valve varies with the driving mode control.

I disconnected the valve in my car and wired it in the open position. This only made a slight difference so I did some additional exhaust modifications to make it louder.[/B]

like?...............................

bcl0328 · 05-06-2012, 10:51 AM

video?

TEAShea · 05-07-2012, 08:01 AM

It is very easy to disconnect. The actuator is linked to the valve by a spring clip. You just have to remove the spring clip. Then either tie the valve stem or glue it in the open position.

TEAShea · 05-07-2012, 08:02 AM

I implemented the JClampett triple exhaust mod.

jgrasty · 05-07-2012, 08:22 AM

Quote:

Originally Posted by TEAShea

I implemented the JClampett triple exhaust mod.

05-06-2012, 08:17 AM	#1
TEAShea Private First Class 11 Rep 179 Posts Drives: 2012 328i Join Date: Oct 2006 Location: Nebraska iTrader: (0)	Exhaust valve 328i Dr. Christophe Lutterman of BMW said that the actuation of the valve varies with the driving mode control. I disconnected the valve in my car and wired it in the open position. This only made a slight difference so I did some additional exhaust modifications to make it louder.
	Appreciate 0 Tweet Quote

05-06-2012, 10:51 AM	#4
bcl0328 Major 127 Rep 1,185 Posts Drives: 2012 328i Join Date: Mar 2012 Location: Abingdon, MD iTrader: (0)	video?
	Appreciate 0 Quote

05-07-2012, 08:01 AM	#5
TEAShea Private First Class 11 Rep 179 Posts Drives: 2012 328i Join Date: Oct 2006 Location: Nebraska iTrader: (0)	It is very easy to disconnect. The actuator is linked to the valve by a spring clip. You just have to remove the spring clip. Then either tie the valve stem or glue it in the open position.
	Appreciate 0 Quote

05-07-2012, 08:02 AM	#6
TEAShea Private First Class 11 Rep 179 Posts Drives: 2012 328i Join Date: Oct 2006 Location: Nebraska iTrader: (0)	I implemented the JClampett triple exhaust mod.
	Appreciate 0 Quote