[mocohead]

My car was updated by the dealership this week. I previously had the TPMS data showing correctly. However, now I can't find HU_CIC anywhere. I loaded the most updated pszdata and version of e-sys.

Can anybody point me to the correct module?

Thanks

[shawnsheridan]

Originally Posted by mocohead

My car was updated by the dealership this week. I previously had the TPMS data showing correctly. However, now I can't find HU_CIC anywhere. I loaded the most updated pszdata and version of e-sys.

Can anybody point me to the correct module?

Thanks

Are you showing HU_xxxx anything, like HU_NBT, HU_CHAMP, etc.?

[thebadboy]

Originally Posted by thebadboy

who knows how to code for high beam assist is automatically activated with the headlight.

HU-cic 3000 acktiv,

but still it does not work.

for f10 must ==> FLA-verbaut and kafas2.

but f30 on there is not that

up

please

[Poohbore]

If you activate the fog lights as cornering lights are they only activated at low speeds for road junctions wrc?

[B-1Pilot]

Hi,

just got my cable. Can someone PM me the most updated pszdata and version of e-sys links?

thanks in advance,

[BMWFanatic2008]

Hey guys, I am about to purchase my cable and wanted to check if I can code the Sports Displays to show up on a car without navi?

Also, can I view and erase my car's error codes with this setup?

Thx in advance.

[shawnsheridan]

Originally Posted by B-1 Pilot

Hi,

just got my cable. Can someone PM me the most updated pszdata and version of e-sys links?

thanks in advance,

PM sent.

[shawnsheridan]

Originally Posted by BMWFanatic2008

Hey guys, I am about to purchase my cable and wanted to check if I can code the Sports Displays to show up on a car without navi?

Also, can I view and erase my car's error codes with this setup?

Thx in advance.

You need 609 Nav Pro for the Sport Displays to work.

You can't clear error codes with E-Sys, but you can with Tool32, which is included in the EDIABAS folder.

[BMWFanatic2008]

Originally Posted by shawnsheridan

You need 609 Nav Pro for the Sport Displays to work.

You can't clear error codes with E-Sys, but you can with Tool32, which is included in the EDIABAS folder.

That sucks. Not sure why they would limit this function to cars with navi, doesn't make much sense. All Sport and Msport models should have it.

Great, I will dev. give Tool32 a try.

[shawnsheridan]

Originally Posted by BMWFanatic2008

That sucks. Not sure why they would limit this function to cars with navi, doesn't make much sense. All Sport and Msport models should have it.

Great, I will dev. give Tool32 a try.

I don't think it is so much having Nav as it is having the larger screen that comes with it.

[ArchJR]

Curious why coding does not work with a K+DCAN (USB) cable. Are there any communications settings to make E-Sys communicate via USB so I can use the cable from our E90 M3, or is it imperative to buy a new ENET cable?

[shawnsheridan]

Originally Posted by JesseSRQ

Curious why coding does not work with a K+DCAN (USB) cable. Are there any communications settings to make E-Sys communicate via USB so I can use the cable from our E90 M3, or is it imperative to buy a new ENET cable?

You must use an ENET Cable, but at least you can buy one cheap, like for a measly $19:

http://www.one-stop-electronics.com/...&product_id=21

For a more detailed explanation though, user GenePoole has a pretty good explanation:

"All the Fxx ethernet cables do is route the ethernet pins to pins in the OBD jack (pins that are unused in Exx cars). Unlike the Exx cables that use a collection of chips to convert K/D CAN signals from the car (first to RS232 serial, then serial to USB), there is no chipset in the ethernet cables. You can make one yourself with a soldering gun. The Fxx series cars have ethernet hardware in the car itself. The Exx cars do not. They use a K or D CAN protocol which is similar to ethernet in that it is a packetized networking protocol, but different in every other way."

[Boss330]

Originally Posted by shawnsheridan

PM sent.

Could you PM me link to latest version of e-sys and datafiles?

Thanks in advance

[shawnsheridan]

Originally Posted by Boss330

Could you PM me link to latest version of e-sys and datafiles?

Thanks in advance

I replied to your PM.

[juancpie]

Hallo, I am new here and I got my F30 a couple of weeks ago but I am not able to find the e-sys @ least from a good source. Can some one help me to find the latest version of e-sys and datafiles. I really want to test my F30 .I can see here that the forum is very reliable and serious

my email is juancpie at hotmail dot com

Thanks in advance

[swestland85]

Just got my new F31 delivered and looking into ways of doing some coding.

Could someone send over a PM with a link to the e-sys software and pszdata?

Looking to code the ASS and the driving style selector. It now starts in the ECO pro mode but I want it to be in the comfort setting or in last remembered setting.

[shawnsheridan]

Originally Posted by juancpie

Hallo, I am new here and I got my F30 a couple of weeks ago but I am not able to find the e-sys @ least from a good source. Can some one help me to find the latest version of e-sys and datafiles. I really want to test my F30 .I can see here that the forum is very reliable and serious

my email is juancpie at hotmail dot com

Thanks in advance

Originally Posted by swestland85

Just got my new F31 delivered and looking into ways of doing some coding.

Could someone send over a PM with a link to the e-sys software and pszdata?

Looking to code the ASS and the driving style selector. It now starts in the ECO pro mode but I want it to be in the comfort setting or in last remembered setting.

Email & PM Sent.

[JesseS]

Originally Posted by swestland85

Just got my new F31 delivered and looking into ways of doing some coding.

Could someone send over a PM with a link to the e-sys software and pszdata?

Looking to code the ASS and the driving style selector. It now starts in the ECO pro mode but I want it to be in the comfort setting or in last remembered setting.

It starts in eco? Is that something specific to the touring model? I've only heard of starting in "comfort".

Still ... If you figure out how to alter the default driving mode (eco, comfort, sport, sport+) in any way make sure to post it. That's something that everyone wants, but nobody has figured it out yet (if it's even possible).

[SandmanJK]

Switch between EcoPro and Comfort is here: ICM - 3000 - IcmKod_B_InitEco = verbaut /nicht_verbaut

[dirksterzel]

@shawnsheridan: I am also interested in latest e-sys and psdzdata links.
Thanks for your great support!

dirk AT sterzel DOT net

[JesseS]

Originally Posted by SandmanJK

Switch between EcoPro and Comfort is here: ICM - 3000 - IcmKod_B_InitEco = verbaut /nicht_verbaut

Ahh, so we can set the default to eco or comfort, but nothing else (it would seem).

[shawnsheridan]

Originally Posted by dirksterzel

@shawnsheridan: I am also interested in latest e-sys and psdzdata links.
Thanks for your great support!

dirk AT sterzel DOT net

PM sent.