11-29-2012, 02:56 PM | #1 |
New Member
3
Rep 16
Posts |
19" to My new F31
Hi,
Is it possible to use My Old rims from My E91? 9.5*19 ET 30 in rear and 8.5 ET 35 in front. I'm going to use them as My winter rims if it's possible! Best regards M. |
11-29-2012, 06:41 PM | #2 |
Lieutenant Colonel
448
Rep 1,846
Posts |
I have seen more aggressive offsets than that on here
__________________
2018 M3 Imola Red Competition package/Executive package/M Performance suspension
|
Appreciate
0
|
11-29-2012, 07:51 PM | #3 |
517
Rep 3,612
Posts |
the fronts will be perfect, but the rears will actually stick outside the rear fender. I have 19X9.5 et35 for my rears, and they are really close to rubbing, and your set up will be 5mm pushed out further. My rear tire size is 255/35/19
|
Appreciate
0
|
11-29-2012, 08:32 PM | #4 |
Lieutenant
16
Rep 478
Posts |
Just curious if you had gone with 265/35/19 would it rub?
|
Appreciate
0
|
11-30-2012, 02:56 AM | #5 | |
New Member
3
Rep 16
Posts |
Quote:
|
|
Appreciate
0
|
11-30-2012, 05:43 AM | #6 |
Dinosaur supervisor
3030
Rep 4,214
Posts |
They are going to be very aggressive. They will stick out outside of the fender and the car needs to be lowered to make them tuck in under the fender.
3mm less aggressive than this setup. - http://www.f30post.com/forums/showpo...4&postcount=37 - http://www.f30post.com/forums/showpo...6&postcount=38 Can you make them fit? Yes, if you like aggressive setups. Is it something I would recommend for someone just looking for a nice setup? No. |
Appreciate
0
|
11-30-2012, 07:14 AM | #7 | |
New Member
3
Rep 16
Posts |
Quote:
|
|
Appreciate
0
|
11-30-2012, 07:59 AM | #8 | |
Dinosaur supervisor
3030
Rep 4,214
Posts |
Quote:
You can make the ET30 fit, but without a drop at least my opinion is that it is way to aggressive. That is even more aggressive than my setup and I think it looks quite bad to see the wheel outside of the fender if I look in the rear view mirrors. Here is a 8.5 ET35 front and 9.5 ET38 rears which to me is the perfect setup for a daily driver. http://www.f30post.com/forums/showpo...6&postcount=27 |
|
Appreciate
0
|
11-30-2012, 08:08 AM | #9 | ||
New Member
3
Rep 16
Posts |
Quote:
Is it possible to change the ET from 30 to 38? Maybe it depends on how much material there is in the rim. |
||
Appreciate
0
|
11-30-2012, 08:17 AM | #10 | |
Dinosaur supervisor
3030
Rep 4,214
Posts |
Quote:
If you plan to lower the car it WILL work, but at least in my opinion it is a bit aggressive for the way I use my car (I live in Sweden also, so I know how it is). |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|