[~STREETDREAMS~]

Would these sizes work & how far out would they Stick past the fender...

F- 20 X 9.5 +31

R- 20 X 10.5 +19

[MrMikeHenry]

Originally Posted by ~STREETDREAMS~

Would these sizes work & how far out would they Stick past the fender...

F- 20 X 9.5 +31

R- 20 X 10.5 +19

20x10.5 +19 wont work its going to poke quiet a bit.

20x9.5 +31 will be flush up front

[~STREETDREAMS~]

Ok thanks, How about

F- 20x9 +32
R- 20X10 +34

[MrMikeHenry]

Originally Posted by ~STREETDREAMS~

Ok thanks, How about

F- 20x9 +32
R- 20X10 +34

depends on your ride height, if your low you will need a stretched tire and or pull the rear fenders to fit 20x10 +34

[~STREETDREAMS~]

I'm not lowered yet waiting to put the wheels on first, but would these tire sizes work with these wheel sizes on my x drive...Thanks

F- 265/35/20

R- 295/30/20

[VELGEN WHEELS]

Originally Posted by ~STREETDREAMS~

Ok thanks, How about

F- 20x9 +32
R- 20X10 +34

You should run

F 20x9 + 32 is fine
R 20x10 + 40 is fine. + 34 is possible but need to be LOW


Running the lower et in the rear , you would need to stretch those tires.

[Ariel@Autocouture]

Originally Posted by VELGEN WHEELS

You should run

F 20x9 + 32 is fine
R 20x10 + 40 is fine. + 34 is possible but need to be LOW


Running the lower et in the rear , you would need to stretch those tires.

Would 20x10 + 40 with 285/30 tires work in the back with springs?

[~STREETDREAMS~]

Originally Posted by VELGEN WHEELS

You should run

F 20x9 + 32 is fine
R 20x10 + 40 is fine. + 34 is possible but need to be LOW


Running the lower et in the rear , you would need to stretch those tires.

What tire sizes should I run with these rims on my x drive, thanks

[VELGEN WHEELS]

Originally Posted by Ariel@Autocouture

Would 20x10 + 40 with 285/30 tires work in the back with springs?

What brand of springs will you be installing ?

[Ariel@Autocouture]

Originally Posted by VELGEN WHEELS

What brand of springs will you be installing ?

H&R Sport Springs

[VELGEN WHEELS]

Originally Posted by Ariel@Autocouture

H&R Sport Springs

Well , we run 20x9 et 35 with a 245-35-20 and 20x10.5 et 45 285-30-20 when there lowered on H&R Sport. NO RUBBING.

[Bmerkid]

Originally Posted by VELGEN WHEELS

Well , we run 20x9 et 35 with a 245-35-20 and 20x10.5 et 45 285-30-20 when there lowered on H&R Sport. NO RUBBING.

This setup is what I have and it fits like a glove!

[Ariel@Autocouture]

Originally Posted by VELGEN WHEELS

Well , we run 20x9 et 35 with a 245-35-20 and 20x10.5 et 45 285-30-20 when there lowered on H&R Sport. NO RUBBING.

Originally Posted by Bmerkid

This setup is what I have and it fits like a glove!

OK awesome thanks for the help! Now that I know we can use the wheel set we used on the E90 335d it's time to get my gf a set of springs and get her 328 lowered..