Anyone ordered 2014 F30 m performance edition?

Syscrusher · 01-13-2014, 02:32 AM

Quote:

Originally Posted by Batmobile

Quote:

Originally Posted by LagunaSecaBlue

OMG I would snap if someone hit my car after I have had it only a few weeks.

People are such a-holes. I hope you got the info from the person and they are paying for it. I would make them have the entire bumper repainted. Brand new car so you should be able to get a good match on the paint without the need for blending other body panels.

No, it was a hit and run, and the check engine light and scratch on my car was in less than 24 hours after delivery!

It isn't that bad, i think a detailer can fix it, however still very frustrating because its a brand new car!

You didn't get appearance protection from BMW did you? If so, they cover any scratches larger than 2 inches.

xpidex · 01-27-2014, 09:33 AM

Quote:

Originally Posted by Adrianwong

I decided to run a square setup for winter

18x8.5 +34 offset with a 72.6mm centerbore

225/45R18 which gives me a -0.44% variance from stock.

The offset is slightly more aggressive than stock pushing the wheels approx 3mm more outwards.

Do you happen to know the offset and hubbore for stock?? (Square setup for 18'?))

I will appreciate a lot that info if you have it. Trying to stay from the stealership and don't have enough time to work around options with a shop.

Adrianwong · 01-27-2014, 09:53 AM

Good morning,

Depends what wheels you will be using.

Stock 8" width wheels will be ET34
Stock hub is 72.6mm
Bolt pattern 5x120

I used 8.5" wheels with an ET34 which pushed the wheels out wards closer to flush with the fenders as seen in my pics.

Offset will change with the width of the wheels.

xpidex · 01-28-2014, 09:05 AM

Quote:

Originally Posted by Adrianwong

Good morning,

Depends what wheels you will be using.

Stock 8" width wheels will be ET34
Stock hub is 72.6mm
Bolt pattern 5x120

I used 8.5" wheels with an ET34 which pushed the wheels out wards closer to flush with the fenders as seen in my pics.

Offset will change with the width of the wheels.

Thanks! Very helpfull info.

I will be searching for a set today since getting my LSB on Sat.

johndeere · 01-28-2014, 05:57 PM

If you guys are looking for a set of OEM 18" 400s square setup at a heavy discount I'm selling mine.

http://www.f30post.com/forums/showthread.php?t=933891

Syscrusher · 01-29-2014, 01:22 AM

Where were you when I paid 4k for mine? Hmmmmm?

01-27-2014, 09:53 AM	#179
Adrianwong Private 7 Rep 66 Posts Drives: 2014 M Performance Edition Join Date: Aug 2013 Location: Toronto iTrader: (0)	Good morning, Depends what wheels you will be using. Stock 8" width wheels will be ET34 Stock hub is 72.6mm Bolt pattern 5x120 I used 8.5" wheels with an ET34 which pushed the wheels out wards closer to flush with the fenders as seen in my pics. Offset will change with the width of the wheels.
	Appreciate 0 Quote

01-28-2014, 05:57 PM	#181
johndeere mhmmmm 136 Rep 633 Posts Drives: MS3X Join Date: Nov 2008 Location: Toronto iTrader: (2)	If you guys are looking for a set of OEM 18" 400s square setup at a heavy discount I'm selling mine. http://www.f30post.com/forums/showthread.php?t=933891
	Appreciate 0 Quote

01-29-2014, 01:22 AM	#182
Syscrusher Lieutenant 237 Rep 409 Posts Drives: 2016 M3 Competition Package Join Date: Jul 2013 Location: Toronto iTrader: (0)	Where were you when I paid 4k for mine? Hmmmmm? __________________ ____________________________________ 2020 X5 M Competition DGM / SO 2016 M3 Competition Package BSM/SO 2014 335 xi M Performance Edition BSM/Black 2007 Lexus IS 350
	Appreciate 0 Quote