[K_O_S]

Hey so I’m new to the forums I was wondering what et on wheels I would need in order for me to run a 255 in front and 275 in rear? I want to run a 19 inch wheel

[johnung]

Originally Posted by K_O_S

Hey so I’m new to the forums I was wondering what et on wheels I would need in order for me to run a 255 in front and 275 in rear? I want to run a 19 inch wheel

Search on posts/replies from Alohasurftoad
He’s the guru and I believe someone recently asked the same question

[K_O_S]

I wasn’t able to find a post about this

[alohasurftoad]

with 255/35/19, front offset range ET30-38, ET32-35 best

with 275?35/19, rear offset range, ET39-47, ET42-45 best

what wheels are you planning on? reasons for those sizes? appearance? function(track/handling)?

[K_O_S]

Yeah I’m looking for the most aggressive look bc I want a 275-30-19 in the rear and 255-35-19 in the front but idk what offset I need for the wheels in order for me not to rub it’s on stock suspension and how wide wheels would I need too

[alohasurftoad]

Originally Posted by K_O_S

Yeah I’m looking for the most aggressive look bc I want a 275-30-19 in the rear and 255-35-19 in the front but idk what offset I need for the wheels in order for me not to rub it’s on stock suspension and how wide wheels would I need too

255/35/19, 26.0", 3.5" sidewall
275/30/19, 25.5", 3.2" sidewall

This is a slight reverse rake diameter stagger and may look a bit odd profile view. I suggest doing one of these staggered combos instead

245/35/19(25.8") & 275/30/19 or
255/35/19 & 285/30/19(25.7")
to reduce the reverse rake to a bit more level, or

255/35/19 & 275/35/19 & 275/35/19(26.6"), which'll be forward rake and look better than reverse.

front: 9" or 8.5", ET35ish
rear: 10" or 9.5", ET45ish
will work for all of these.
.

[K_O_S]

Ok thank you it makes a lot more sense now

[K_O_S]

Would there be any rubbing issues with a 19x9 with a 245-34-19 in the front and a 19x10 in the rear with 275-30-19 and could I run a et35 in the front and a et40 in the rear with a 5mm spacer or would it rub

[alohasurftoad]

Originally Posted by K_O_S

Would there be any rubbing issues with a 19x9 with a 245-34-19 in the front and a 19x10 in the rear with 275-30-19 and could I run a et35 in the front and a et40 in the rear with a 5mm spacer or would it rub

there is no need for the 5mm rear spacer

[K_O_S]

Ok thank you for the help. What setup do you have on yours?

[alohasurftoad]

i have volk racing G25 with MPS4S tires, M-Performance suspension

245/40/18 on 18x8, ET32.5 front, 255/40/18 on 18x9, ET42 rear

[alohasurftoad]

Originally Posted by K_O_S

Would there be any rubbing issues with a 19x9 with a 245-34-19 in the front and a 19x10 in the rear with 275-30-19 and could I run a et35 in the front and a et40 in the rear with a 5mm spacer or would it rub

here member aps has 245/35/19 on 19x9 ET29 front, 285/30/19 on 19x10 ET40 rear
https://f30.bimmerpost.com/forums/sh...&postcount=290
https://f30.bimmerpost.com/forums/sh...&postcount=321
.

[K_O_S]

That’s nice it looks perfect with that setup

[K_O_S]

Would a 19x10+38et fit if so what tire spec it’s on stock suspension