11-09-2016, 04:17 PM | #1 |
Luke Wright
166
Rep 252
Posts |
Front wheel offset
Pulling the trigger on some 17 inch arc 8's. Will a 17x9 et30 fit up front? I know it would be aggressive but I've seen threads about people running 437m fronts which are 19x9 et29. Sorry about all the posts lately
|
11-10-2016, 09:58 AM | #4 |
Second Lieutenant
90
Rep 205
Posts |
it should fit. Someone here ran 255/40/18 on 18x9. I have 255/40/18 on 18x8.5 35 offset that sits flush,well.. slight poke. Yours might poke a little more due to the slightly lower offset.
|
Appreciate
0
|
11-10-2016, 01:13 PM | #5 |
A family of bimmers
2747
Rep 7,742
Posts |
you will extend an extra 17mm from the stock wheel towards the fender. hang a string off your fender and measure out from the rim and youll see where 17mm lands compared to that string.
if you are lowered it may be tough to run a 245 et32 may work better if you can find that in the wheel you are looking at.
__________________
2018 PB/Black G01 X3M40i | 699M | ZDA | ZPP | ZPX | Maxton front lip | X3M vents | 15mm Spacers | Diamond G20 style grills |
Appreciate
0
|
11-10-2016, 01:29 PM | #6 | |
Luke Wright
166
Rep 252
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|