[muzo178]

Is this possible if the dealer is unwilling to update your car? Or do we need an ICOM interface and related software?

[shawnsheridan]

Originally Posted by muzo178

Is this possible if the dealer is unwilling to update your car? Or do we need an ICOM interface and related software?

It can be done with E-Sys, by flashing every module, and updating VCM with the new I-Step used for the flashing.

I wouldn't recommend it though. If doing the whole car, it is better to run a full Measures Plan with ISTA/P and ICOM.

[muzo178]

Originally Posted by shawnsheridan

It can be done with E-Sys, by flashing every module, and updating VCM with the new I-Step used for the flashing.

I wouldn't recommend it though. If doing the whole car, it is better to run a full Measures Plan with ISTA/P and ICOM.

I've seen you mention an E-Sys ECU Flashing Guide. Did you ever publish that? I can't seem to locate it. I am looking to flash my KOMBI ECU as I don't have the BMW LOGO that I can change to the M Performance logo.

If you never published it due to it being unsuccessful, then I'm gonna go in for a full Measures Plan next week.

[shawnsheridan]

Originally Posted by muzo178

I've seen you mention an E-Sys ECU Flashing Guide. Did you ever publish that? I can't seem to locate it. I am looking to flash my KOMBI ECU as I don't have the BMW LOGO that I can change to the M Performance logo.

If you never published it due to it being unsuccessful, then I'm gonna go in for a full Measures Plan next week.

The issue back then was E-Sys 3,18,4. Since E-Sys 3.22.5 was released, it works. I never published a Guide, but if you are interested, PM me, and I'll explain the process.

[FlightF30]

Originally Posted by shawnsheridan

The issue back then was E-Sys 3,18,4. Since E-Sys 3.22.5 was released, it works. I never published a Guide, but if you are interested, PM me, and I'll explain the process.

Could you please PM me, My issue is when i use bimmer code to do this it says 550D on my car, this is a common issue with the 6WB digital cluster but i want to see if i can fix or get this to work with E-Sys since i am going to be using it anyways to code out my edc since i did coil overs.

[shawnsheridan]

Originally Posted by FlightF30

Could you please PM me, My issue is when i use bimmer code to do this it says 550D on my car, this is a common issue with the 6WB digital cluster but i want to see if i can fix or get this to work with E-Sys since i am going to be using it anyways to code out my edc since i did coil overs.

PM sent.

[ice_rfm]

Originally Posted by shawnsheridan

PM sent.

I have 6wb also and only 550d logo can you help me also shawn???

[shawnsheridan]

Originally Posted by ice_rfm

I have 6wb also and only 550d logo can you help me also shawn???

Maybe. What is it you need?

[ice_rfm]

Originally Posted by shawnsheridan

Maybe. What is it you need?

I just want the normal m performance logo and not the 550d logo

[shawnsheridan]

Originally Posted by ice_rfm

I just want the normal m performance logo and not the 550d logo

Understood, but not possible as far as I know.