Firewall Holes

reidpath · 12-21-2012, 11:57 AM

Does anyone know the best place to route wires up to the bumper through the firewall from inside of the vehicle?

I need to fit 2 x Laser Interceptor connectors through.

Chris@codemybimmer · 12-21-2012, 12:15 PM

Quote:

Originally Posted by reidpath

Does anyone know the best place to route wires up to the bumper through the firewall from inside of the vehicle?

I need to fit 2 x Laser Interceptor connectors through.

i think the easiset way would be to go out through the door into the crack between the hood, door, the fender. did that for my E90 to wire up some LED's but it was virtually un noticeable

JYohay · 12-21-2012, 12:52 PM

check out the boost gauge installs.
there is a rubber hole that you can slit a small hole in up in the drivers footwell. it comes out like where the coolant reseviour is

Cyberdemon · 12-21-2012, 01:02 PM

If you find any post a picture...I've had my old Blinders sitting in a box since I sold my TL and I told myself I wouldn't bother, but since it seems no one wants to buy them I may just re-install them.

reidpath · 12-21-2012, 01:03 PM

I'm going to go look for the rubber piece right now. I'll post pics if I use it.

12-21-2012, 11:57 AM	#1
reidpath Private 9 Rep 94 Posts Drives: 328i Join Date: Jun 2012 Location: DC/Maryland iTrader: (0)	Firewall Holes Does anyone know the best place to route wires up to the bumper through the firewall from inside of the vehicle? I need to fit 2 x Laser Interceptor connectors through.
	Appreciate 0 Tweet Quote

12-21-2012, 12:52 PM	#3
JYohay Banned 42 Rep 2,009 Posts Drives: 2011 X5 Join Date: Mar 2012 Location: NY iTrader: (3)	check out the boost gauge installs. there is a rubber hole that you can slit a small hole in up in the drivers footwell. it comes out like where the coolant reseviour is
	Appreciate 0 Quote

12-21-2012, 01:02 PM	#4
Cyberdemon Brigadier General 1538 Rep 3,331 Posts Drives: 2020 X5 40i, 2018 M3 Comp Join Date: Jun 2012 Location: Long Island NY iTrader: (3)	If you find any post a picture...I've had my old Blinders sitting in a box since I sold my TL and I told myself I wouldn't bother, but since it seems no one wants to buy them I may just re-install them. __________________ Current: '20 X5, '18 M3 ZCP Previous: '11 E90 335i, '11 E90 M3, '16 VW GTI, '15 M235i, '13 335i, '08 TL-S, '00 Corvette
	Appreciate 0 Quote

12-21-2012, 01:03 PM	#5
reidpath Private 9 Rep 94 Posts Drives: 328i Join Date: Jun 2012 Location: DC/Maryland iTrader: (0)	I'm going to go look for the rubber piece right now. I'll post pics if I use it.
	Appreciate 0 Quote