03-19-2021, 06:18 PM | #1 |
Enlisted Member
14
Rep 43
Posts |
"The vehicle could not be identified successfully. Check vehicle interface and 'PAD a
Hi Guys after successfully installing ISTA now I'm getting an error when I try to connect to the car.
Will see the vin but when I try to connect I get this message "The vehicle could not be identified successfully. Check vehicle interface and 'PAD active'." |
03-20-2021, 10:15 AM | #2 |
Colonel
588
Rep 2,302
Posts |
Read this...
https://f30.bimmerpost.com/forums/sh....php?t=1807761 If it doesn't help you can also read this... https://cartechnology.co.uk/showthread.php?tid=81237 |
Appreciate
0
|
03-16-2022, 09:04 AM | #4 |
Enlisted Member
12
Rep 48
Posts |
If your trying to connect to an E93 from your signature, you have to set EDIABAS.INI connection to STD:OBD.
then if you connect your car with an K-D CAN cable to your Laptop, go to device Manager, COM Connections, right click on the Cable driver, Set COM-Port to 1-5, then press on extendet settings. On the bottom, there should be something called "waiting time" or similar. on default, it is set to 16ms. change that to 1ms and confirm. In ISTA go to settings -> Vehicle interface and check "Ediabas". Restart ISTA. If you still can´t connect, the K-DCAN cable is faulty |
Appreciate
0
|
11-10-2022, 03:30 PM | #5 |
Registered
2
Rep 4
Posts |
Can someone explain exactly how to check/change/set the connection to STD:OBD?
I opened up my EDIABAS.ini file and it looked exactly like below, I didn't see any lines that mention "connection" or "STD" or "Standard" ;################# ;# EDIABAS 7.3.0 # ;################# ;================================================= ============================ [Configuration] ;================================================= ============================ Interface = REMOTE Simulation = 0 EcuPath = C:\EDIABAS\ECU SimulationPath = C:\EDIABAS\SIM TracePath = C:\Windows\Temp TraceSize = 1024 ApiTrace = 0 IfhTrace = 0 ; IfhnTrace = 0 ; SystemTraceSys = 0 ; SystemTraceBip = 0 ; SystemTraceIfh = 0 ; SystemTraceNet = 0 ; BipDebugLevel = 0 ; BipErrorLevel = 0 UbattHandling = 0 IgnitionHandling = 0 ClampHandling = 0 RetryComm = 1 SystemResults = 1 TaskPriority = 0 ; CodeMapping = C:\EDIABAS\BIN\ansi2oem.tab ; LoadWin32 = 0 NetworkProtocol = TCP ; --- neu ab EDIABAS 7.2.0 --------------------------------------------------- ShowIcon = 0 LogLevel = 0 TraceBuffering = 1 TraceHistory = 999 TraceSync = 1 ; TraceWriter = <FilePathName> ;================================================= ============================ [TCP] ;================================================= ============================ RemoteHost = LMUC203404 Port = 6801 TimeoutConnect = 2000 TimeoutReceive = 2000 TimeoutFunction = 10000 ; TimeResponsePending = 5000 ; DisconnectOnApiEnd = 1 ; InitCmd0 = FE,04,00,03,01 ; InitCmd1 = FD,05,00,03,01 ;================================================= ============================ [XEthernet] ;================================================= ============================ RemoteHost = Autodetect HeaderFormat = 0 TesterAddress = F4,F5 ControlPort = 6811 DiagnosticPort = 6801 TimeoutConnect = 20000 ;================================================= ============================ [IfhProxy] ;================================================= ============================ Port = 6700 ;================================================= ============================ ; End Of File EDIABAS.ini ;================================================= ============================ |
Appreciate
0
|
11-10-2022, 03:39 PM | #6 |
Registered
2
Rep 4
Posts |
I'm also curious if anyone can confirm that this should read "Standard OBD" instead of "Standard ICOM" if things are setup correctly as mentioned above by Tuerkay
|
Appreciate
0
|
11-11-2022, 09:44 AM | #8 | |
Registered
2
Rep 4
Posts |
Quote:
I made the change from "Interface = REMOTE" to "Interface = STD:OBD" in the ediabas.ini text file and now ISTA connects to my e61 and everything works! I had already changed the port settings to COM1 and 1ms latency Last edited by Dynamic Entry; 11-11-2022 at 07:21 PM.. |
|
Appreciate
0
|
04-14-2024, 08:27 AM | #10 | |
Captain
202
Rep 806
Posts |
Quote:
also - make sure when connecting to ISTA, the ip is set to 169.254.1.1 for the local network connection. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|