F33 Coding of convertible top

HotScott · 05-17-2016, 10:23 PM

Does anyone know if the convertible top can be coded to open and close at a higher speed setting then factory?

Gabrola · 05-18-2016, 04:16 AM

On my F23 there are two codes to change, they contain the hex of the speed so 40km/h is 28 in hex (that is the max speed you can safely set it to):

CVM > 3005 CONFIG_LIMITS > GESCHWINDIGKEIT_ENDLAGE
CVM > 3005 CONFIG_LIMITS > GESCHWINDIGKEIT_ZWISCHENPOSITION

By any chance have you coded the mirrors to open and close from key fob?

HotScott · 05-18-2016, 07:20 AM

Quote:

Originally Posted by Gabrola

On my F23 there are two codes to change, they contain the hex of the speed so 40km/h is 28 in hex (that is the max speed you can safely set it to):

CVM > 3005 CONFIG_LIMITS > GESCHWINDIGKEIT_ENDLAGE
CVM > 3005 CONFIG_LIMITS > GESCHWINDIGKEIT_ZWISCHENPOSITION

By any chance have you coded the mirrors to open and close from key fob?

Yes the Mirrors:

FEM_BODY 3110 ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN --Unfold
FEM_BODY 3110 ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -- Fold

HotScott · 05-18-2016, 08:18 AM

Quote:

Originally Posted by Gabrola

On my F23 there are two codes to change, they contain the hex of the speed so 40km/h is 28 in hex (that is the max speed you can safely set it to):

CVM > 3005 CONFIG_LIMITS > GESCHWINDIGKEIT_ENDLAGE
CVM > 3005 CONFIG_LIMITS > GESCHWINDIGKEIT_ZWISCHENPOSITION

By any chance have you coded the mirrors to open and close from key fob?

Ok so I'm changing both settings to : wert =02
werte =28 ??

Gabrola · 05-18-2016, 09:48 AM

Quote:

Originally Posted by HotScott

Ok so I'm changing both settings to : wert =02
werte =28 ??

Yes that is correct.
About the mirrors, these codes don't work, seems to be a problem with convertibles MY2015 and later.

CSIERRA09 · 06-28-2017, 11:37 PM

Quote:

Originally Posted by Gabrola

Quote:

Originally Posted by HotScott

Ok so I'm changing both settings to : wert =02
werte =28 ??

Yes that is correct.
About the mirrors, these codes don't work, seems to be a problem with convertibles MY2015 and later.

[QUOTE=Gabrola;19955685]

Quote:

Originally Posted by HotScott

Ok so I'm changing both settings to : wert =02
werte =28 ??

Just did this !
Man I love this forum!!!

steve@codemybimmer · 06-29-2017, 08:37 AM

Do you guys have issues with the hard top closing at 25mph? I would be a bit afraid.

Billfitz · 06-29-2017, 10:03 AM

Quote:

Originally Posted by bimmercoders

Do you guys have issues with the hard top closing at 25mph? I would be a bit afraid.

+1. Best case, the top gets blown off the car. Worst case, the car gets blown off the road.

Tim182 · 06-29-2017, 10:08 AM

My old E89 was good to 25mph or so. Wouldn't worry to much as long as it's not windy. More importantly, watch for speed bumps and corners as those can destroy the mechanism

05-17-2016, 10:23 PM	#1
HotScott New Member 3 Rep 8 Posts Drives: 2014 435i Convert. Join Date: Jul 2013 Location: Monticello IL iTrader: (0)	F33 Coding of convertible top Does anyone know if the convertible top can be coded to open and close at a higher speed setting then factory?
	Appreciate 0 Tweet Quote

05-18-2016, 04:16 AM	#2
Gabrola First Lieutenant 191 Rep 314 Posts Drives: 340i Join Date: Feb 2015 Location: Egypt iTrader: (0)	On my F23 there are two codes to change, they contain the hex of the speed so 40km/h is 28 in hex (that is the max speed you can safely set it to): CVM > 3005 CONFIG_LIMITS > GESCHWINDIGKEIT_ENDLAGE CVM > 3005 CONFIG_LIMITS > GESCHWINDIGKEIT_ZWISCHENPOSITION By any chance have you coded the mirrors to open and close from key fob?
	Appreciate 0 Quote

06-29-2017, 08:37 AM	#7
steve@codemybimmer BimmerPost Supporting Vendor 663 Rep 1,976 Posts Drives: 2020 G20 320i M Sport Join Date: Apr 2010 Location: Canada & HK iTrader: (2) Garage List 2020 320i M Sport [0.00]	Do you guys have issues with the hard top closing at 25mph? I would be a bit afraid. __________________ CMB Solutions Limited \|codemybimmer.ca Vehicle Diagnostics \| CarPlay Solutions \| Retrofit & Repair Consulting/Programming steve.ma@cmbsolutionsltd.com \| www.codemybimmer.ca Online Store \| Remote Coding Package\| ID6 Retrofit for almost all F Chassis BMWs
	Appreciate 0 Quote

06-29-2017, 10:08 AM	#9
Tim182 Second Lieutenant 75 Rep 207 Posts Drives: F33 440i Vert (LCI) MPPSK Join Date: Oct 2012 Location: UK iTrader: (0)	My old E89 was good to 25mph or so. Wouldn't worry to much as long as it's not windy. More importantly, watch for speed bumps and corners as those can destroy the mechanism
	Appreciate 0 Quote