[fshubert]

Originally Posted by BooGooBird

How about outer light blinking?

Inner. Must be a code for the outer. Guess it's time to really experiment......

[BooGooBird]

Originally Posted by fshubert

Inner. Must be a code for the outer. Guess it's time to really experiment......

I have been looking for the value to change outer light blinks for years haha
still no idea which value it is

[Adamr916]

Originally Posted by BooGooBird

so you are saying if i have rear fog light enabled, then it will make the outer light blink when brake hard?

No, I have rear fogs enabled, but they are the lights that flash, not the outer brake lights.

[BooGooBird]

from what i know, only euro f30s flash outter light when hard brake applied

[BooGooBird]

Just went for another coding and finally coded outer light brake like euros bmws way better than the inner light w/ led bulb replacement on the outer brake light

[BooGooBird]

Originally Posted by fshubert

Inner. Must be a code for the outer. Guess it's time to really experiment......

Finally figured it out the code for outer.

[Gabreigns]

Originally Posted by BooGooBird

Finally figured it out the code for outer.

[IMG]

[/IMG] What is it?

[Adamr916]

He posted it in the other thread about this.

[BooGooBird]

Originally Posted by Gabreigns

[IMG]

[/IMG] What is it?

FEM_BODY => ESS_AKTIVIERBARER_AUSGANG = bremslicht_blinkend
REM MAPPING BRAKEFORCE L OUTPUT
change to bl
And do the same for the right side

[DJ Rocc]

Originally Posted by BooGooBird

FEM_BODY => ESS_AKTIVIERBARER_AUSGANG = bremslicht_blinkend
REM MAPPING BRAKEFORCE L OUTPUT
change to bl
And do the same for the right side

What stopping force does yours activate at? (In code)

[BooGooBird]

Originally Posted by DJ Rocc

What stopping force does yours activate at? (In code)

I used factory default values

[DJ Rocc]

Originally Posted by BooGooBird

I used factory default values

Sounds great so i tested mine today, and my outer brake lights (the usual brake lights) Flash.

You said you prefer this to the inner ones flashing? How come? I thought it would be better because the inner and the outer would be lit when stopping hard, so more lights.

I was going to try and change them to get the inners to flash, but you are giving second thoughts now, lol.

Also, is there a way to make the lights flash faster, also along with the third middle brake light?

[BooGooBird]

i have LED bulb on my outer light, it is more brighter than the factory inner light, besides, when LED blinks, it is more visible, unless you have the new LCI tail light.

the third middle brake light should blink by default, this is my video you can take a look at,

[Gabreigns]

Originally Posted by BooGooBird

i have LED bulb on my outer light, it is more brighter than the factory inner light, besides, when LED blinks, it is more visible, unless you have the new LCI tail light.

the third middle brake light should blink by default, this is my video you can take a look at,

What bulb are you using on your outer's?

[eluded]

Awesome video above. I assume that's how they look when you code them in the US

[DJ Rocc]

Originally Posted by BooGooBird

i have LED bulb on my outer light, it is more brighter than the factory inner light, besides, when LED blinks, it is more visible, unless you have the new LCI tail light.

the third middle brake light should blink by default, this is my video you can take a look at,

Awesome Video! Yeah I only have the regular bulbs as my brake lights, but will change to LED in the future. I notice in the first Run, the brakes flash slower than in the other Two Runs, is it that with more force they flash faster?

I will have to check if my third stop lamp blinks as well.

[raqautle]

Originally Posted by BooGooBird

REM MAPPING BRAKEFORCE L OUTPUT
change to bl
And do the same for the right side

Is the outer flashing lights in the REM ECU?
And how do you increase the blink frequency?

[BooGooBird]

Originally Posted by DJ Rocc

Awesome Video! Yeah I only have the regular bulbs as my brake lights, but will change to LED in the future. I notice in the first Run, the brakes flash slower than in the other Two Runs, is it that with more force they flash faster?

I will have to check if my third stop lamp blinks as well.

No, you can change the value

REM 3064
ESS BLINKFREQ 1
ESS BLINKFREQ 2
Change to 05 or other higher number

this is for the flash frequency that you want

[BooGooBird]

Originally Posted by raqautle

Is the outer flashing lights in the REM ECU?
And how do you increase the blink frequency?

this is for the flash frequency that you want

REM 3064
ESS BLINKFREQ 1
ESS BLINKFREQ 2

[BooGooBird]

Originally Posted by Gabreigns

What bulb are you using on your outer's?

I bought some cree led from japan, they are by far the brightest i seen on the market

[DJ Rocc]

Originally Posted by BooGooBird

I bought some cree led from japan, they are by far the brightest i seen on the market

Which ones did you get?

[DJ Rocc]

Originally Posted by BooGooBird

No, you can change the value

REM 3064
ESS BLINKFREQ 1
ESS BLINKFREQ 2
Change to 05 or other higher number

this is for the flash frequency that you want

Cool I will try it out.