[kon]

Originally Posted by Aritaurus

Looks like you need 49.2 where the only difference is that file you mentioned - cafd_000000f9.caf.007_006_009.

I think Shawn should be able to just give you that cafd file and you can just plug it into your existing cafd directory and code HU_CIC. I'm taking my car in for service soon as well so I might need it too if they update the software on my car.

Got that one file from Shawn

Seems 49.2 is really just one update to a specific HU_CIC

[shawnsheridan]

Originally Posted by ykau

Hi Shawn, I think i have asked before, but would like to ask again if the odometer mileage value can be just changed via esys or fsc?
reason our country will consider warranty expired after driving for more than 100K. thanks

Originally Posted by kon

*subscribed*

Not possible. You would need an EEPROM burner to blank the mileage in KOMBI, but the Mileage is backed up in CAS, and Kombi would pull the mileage back in from CAS module.

[kon]

Originally Posted by shawnsheridan

Not possible. You would need an EEPROM burner to blank the mileage in KOMBI, but the Mileage is backed up in CAS, and Kombi would pull the mileage back in from CAS module.

Would jacking the car up and turn the front wheel in reverse reverse the odometer

sorry can't resist!

[UhhItsANT]

Originally Posted by kon

Would jacking the car up and turn the front wheel in reverse reverse the odometer

sorry can't resist!

reminds me of that movie... ferris bueller day off

[vithy]

Is it possible to code Sports + without the hardware required?

[Chris@codemybimmer]

Originally Posted by vithy

Is it possible to code Sports + without the hardware required?

yes

ICMQL > 3000 > LCMKOD B SPORTLENKUNG > VERBAUT

[Puri1]

Hey Guys, I'm trying to install the software on a MacBook Air. Since HardDisk space is at a premium I was wondering if I can leave the data on an external USB drive and still run Esys and code. Does the psz data have to be on the internal HDD ?

Has anyone coded with a MB Air before? How was your experience. Did it work well?

[Puri1]

Here guys, this is the cheat sheet I use for my F30. Hope it helps some of you.

[vithy]

If one of the CAF is programmed and i want to default them, can i just hit 'CODE'. and reset the settings? or is there a special method to do so.

[steve@codemybimmer]

Originally Posted by vithy

If one of the CAF is programmed and i want to default them, can i just hit 'CODE'. and reset the settings? or is there a special method to do so.

That's correct. It will return it back to its factory state.

[demge01]

Its been a while since I've posted and I've updated to 3.22.5.0 and purchased the patch and token.

I've been able to read the coding data in all but one of the modules but when I try to edit the FDL files and save before coding I get the attached error.

Any help appreciated.

[DXL XLR8]

So I coded the car to close all windows upon lock, but it seems the rear windows just stays down. I saw videos where all the windows roll up. Is there a code for this?

[ad78]

how long it will take after you made a transaction to andy? im freaking excited lol

is there any tutorial on 3.22? it seems a lot different on 3.18

[shawnsheridan]

Originally Posted by ad78

how long it will take after you made a transaction to andy? im freaking excited lol

is there any tutorial on 3.22? it seems a lot different on 3.18

3.22.5 is near identical to 3.18.4. There are some additional Target I-Level Options that are not used, and a couple buttons are renamed.

There is no tutorial. You use it just the same as 3.18.4.

[ad78]

Originally Posted by shawnsheridan

3.22.5 is near identical to 3.18.4. There are some additional Target I-Level Options that are not used, and a couple buttons are renamed.

There is no tutorial. You use it just the same as 3.18.4.

Ok so same placement of buttons? If yes, I'm good to go.

Still waiting on my token / patch

[shawnsheridan]

Originally Posted by ad78

Ok so same placement of buttons? If yes, I'm good to go.

Still waiting on my token / patch

Yes, same screen placement. Read VCM is now Read SVT, and I think one other button label changed, but I can't remember which one it is.

There is also a new OBD-CVN Module, but you won't need it either.

[ad78]

so i just got everything from andy and im getting this error

[Exception - UNKNOWN] CAF cafd_000000f9-007_003_024 does not support FA2FP version 001.000.071 for F030. Minimum required version is 001.000.074. Please use current PDX template!

i have 3.22.5 psdzdata is 48.1 and pasted the missing file on cafd 003_24

what is wrong here? do i need to replace the whole 48.1 to 49.1?

[shawnsheridan]

Originally Posted by ad78

so i just got everything from andy and im getting this error

[Exception - UNKNOWN] CAF cafd_000000f9-007_003_024 does not support FA2FP version 001.000.071 for F030. Minimum required version is 001.000.074. Please use current PDX template!

i have 3.22.5 psdzdata is 48.1 and pasted the missing file on cafd 003_24

what is wrong here? do i need to replace the whole 48.1 to 49.1?

Yes, you need to update to 49.1, and since you are already using E-Sys 3.22.5, there is no reason not to.

[ad78]

Originally Posted by shawnsheridan

Yes, you need to update to 49.1, and since you are already using E-Sys 3.22.5, there is no reason not to.

ok, god damn im still on .rar 15-19 on 49.1

just remove the 48.1 and just paste the 49.1 correct?

[shawnsheridan]

Originally Posted by ad78

ok, god damn im still on .rar 15-19 on 49.1

just remove the 48.1 and just paste the 49.1 correct?

If you are upgrading from a previous version of PSdZData, MOVE current CAFD folder (e.g. C:\ESysData\psdzdata\swe\cafd) to a backup location; DELETE current PSdZData folder (e.g C:\ESysData\psdzdata) and REPLACE with new one. If you encounter any [C012] Missing CAFD errors, look in your backed up CAFD folder from above for them, and then copy them to the new CAFD folder (e.g C:\ESysData\psdzdata\swe\cafd).

[demge01]

Originally Posted by demge01

Its been a while since I've posted and I've updated to 3.22.5.0 and purchased the patch and token.

I've been able to read the coding data in all but one of the modules but when I try to edit the FDL files and save before coding I get the attached error.

Any help appreciated.

Still can't figure out what's wrong - any ideas?

This is the text in the body of the error file:
EstCmCryptographicException: SignHandler can not be initialized with data from EST <Signature decryption error: javax.crypto.BadPaddingException: Invalid PKCS#1 padding: encrypted message and modulus lengths do not match!>


__________________________________________________ ___
com.bmw.esys.commons.exception.EsysException: Failed to sign FDL. [C158]
at com.bmw.esys.commons.SecurityHandler.sign(Security Handler.java:92)
at com.bmw.esys.domain.coding.FdlLogic.save(FdlLogic. java:150)
at com.bmw.esys.gui.DefaultFileHandlingController.doS ave(DefaultFileHandlingController.java:174)
at com.bmw.esys.gui.DefaultFileHandlingController.sav e(DefaultFileHandlingController.java:189)
at com.bmw.esys.gui.FileHandlingSupport.save(FileHand lingSupport.java:292)
at com.bmw.esys.gui.FileHandlingSupport.access$700(Fi leHandlingSupport.java:41)
at com.bmw.esys.gui.FileHandlingSupport$SaveAction.do ActionPerformed(FileHandlingSupport.java:345)
at com.bmw.esys.gui.AbstractView$AbstractGuiAction.ac tionPerformed(AbstractView.java:233)
at javax.swing.AbstractButton.fireActionPerformed(Unk nown Source)
at javax.swing.AbstractButton$Handler.actionPerformed (Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed (Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseRe leased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent( Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(U nknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unkno wn Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectio nPrivilege(Unknown Source)
at java.security.AccessControlContext$1.doIntersectio nPrivilege(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectio nPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilter s(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(U nknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarch y(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: com.bmw.est.cm.exception.EstCmCryptographicExcepti on: SignHandler can not be initialized with data from EST <Signature decryption error: javax.crypto.BadPaddingException: Invalid PKCS#1 padding: encrypted message and modulus lengths do not match!>
at com.bmw.est.cm.core.ESTCM.signXML(Unknown Source)
at com.bmw.esys.commons.SecurityHandler.sign(Security Handler.java:90)
... 44 more

[ad78]

Originally Posted by Puri1

Here guys, this is the cheat sheet I use for my F30. Hope it helps some of you.

finally i got all sorted and i used this cheat. everything was flaswless! the DRL tail is so sweet! the whole thing lighting up. pretty badass

thank you for this cheat sheet!