[tomsab0]

Hy, I have a problem with activation BMW LIVE. Setup is CIC Business with Combox.

I did the following steps in order to activate it:

1. FDL-code CMB_MEDIA:
MAIN_BOARD_ALONE -> mainboard_alone
TELEMATIK_VIN -> Coding_VIN

2. Edit FA
VIN = "FAKEVIN"

3. FDL-code CMB_MEDIA without further changes

4. "Update services" from the idrive

5. Load and activate original VO

6. FDL-code CMB_MEDIA:
MAIN_BOARD_ALONE -> ecallboard_present
TELEMATIK_VIN -> MOST_VIN


After that BMW Live works!!! BUT only for one day. When I am driving the next day, it doesn't work anymore. Also Bluetooth data isn't showing up anymore... Does anyone have an idea, what the problem could be?

[myszano1]

Originally Posted by Bypx

Thank you. Problem solved with WBAFV31030DZ17872 .

Hi. Can you please describe step by step what need to be coded to enable live in retrofitted nbt. It's your's still working?

[jalami]

Hi.
It is valid for hu_entrynav???

[jalami]

Originally Posted by jalami

Hi.
It is valid for hu_entrynav???

Hi again
Someone has advanced something. I have surrendered

[jalami]

Originally Posted by Bypx

Thank you. Problem solved with WBAFV31030DZ17872 .

Use Emulator?

[sirk77]

Does it work for factory NBT?
My BMW online service was expired. Is there any way to recover it without buying from BMW?

Is option 616 correct for BMW online? Maybe i should add to FA then buy 1 month service then it should work. I did this way for RTTI so far it works.

Originally Posted by bmwdd

You actually don't need to update the modified FA into your car and you shouldn't be doing it. Instead, you should

1. Edit FA and change VIN to WBAFV31030DZ17872
2. Save as a new FA (do not use this new FA for all other purposes other than enabling BMW Live)
3. Do not write the FA to the car
3. VO code NBT (make sure you've disabled VCM and MSM update in eSYS option)
4. Go to ConnectedDrive and update service
5. Edit FA and change VIN to your car's VIN
6. VO code NBT
7. Do not update service anymore

(You also need a emulator for coding someone else's VIN into NBT)

[hsk1610]

I have the same issue. My BMW Assist expired a month ago and I tried to code for BMW Live last night but I could not get it to work. Do I have to have a valid BMW Assist membership before I can code for BMW Live? I thought it was one or the other so even without BMW Assist, I should be able to get BMW Live working with tethering with my phone.

[binobinobino]

I have coded internet browser, tethering turned on (weather works) and when I try start it, it closed...what else can i try to do ?

[hsk1610]

I tried to do this yesterday, but when I go to try to enter the FAKE VIN, it won't let me type in the V in the VIN number. Can't figure out why it wont take that letter?

[GuMiMoRo]

Does anyone cn share the ultimate coding (FA, fdl and xml) for this to work? so many information but sometimes is to complex!

-remove 612
-have from factory 614 e 615
-FA code HU-NBT

edit the XML with these settingsDOCNUAS user thx)

PHP Code:

Ok!
So these are the settings that for now are working correctly for BMW Online/Live with the weather widget:

PHP Code:
      <bon>
        <active>1</active>
        <onlinemode>1</onlinemode>
        <url>https://b2v.bmwgroup.de/com/cdpnbtlive/vehicle/nbt/servlet/start</url>
        <disable>00</disable>
        <vmax>FF</vmax>
        <csdtimeout>600</csdtimeout>
        <gprstimeout>300</gprstimeout>
        <widget_url>https://b2v.bmwgroup.de/com/cdpnbtlive/vehicle/nbt/nbt_appstore/servlet/splitscreen</widget_url>
      </bon>
      <bin>
        <active>1</active>
        <onlinemode>1</onlinemode>
        <url>https://www.google.com/ncr</url>
        <authurl>https://b2v.bmwgroup.de/com/bin_auth2/de/csim</authurl>
        <disable>00</disable>
        <vmax>FF</vmax>
      </bin>  
And this is to make BMW Online/Live working through bluetooth:

PHP Code:
<aclappl>
        <appname>bon</appname>
        <appcode>3</appcode>
        <apppriority>3</apppriority>
        <devicecost>2;1</devicecost>
        <datavoicemedia>1</datavoicemedia>
        <dataclass>2;1</dataclass>
        <datatype>1</datatype>
        <switching>0</switching>
        <appbearer>2</appbearer>
        <voicedataparallel>0</voicedataparallel>
        <provmode>1</provmode>
        <audio>1</audio>
        <roaming>1</roaming>
        <mo>0</mo>
        <mt>0</mt>
        <clampfollowup>0</clampfollowup>
        <userauth>0</userauth>
        <vehauthlevel>1</vehauthlevel>
        <proxies>2,1/1,1</proxies>
        <outgoingportrange>25000-29999</outgoingportrange>
        <qospriority>0</qospriority>
      </aclappl>  
Modify your file in order to reflect these changes.


-----------------------------------------------------------------------------------------------------------------------

Sorry about the delay, but here's how to enable pictures at destination:
You just need to make two small changes (I hope) 

First:

Where you have:
PHP Code:
<pictures>
        <url/> (or any other url)
      </pictures>  
Change it to:
PHP Code:
<pictures>
        <url>https://b2v.bmwgroup.de/com/cdpnbtlive/vehicle/nbt/nbt_pictures/servlet/cab</url>
      </pictures>  

Second:

If you have:

PHP Code:
<b_pictures>0</b_pictures>  
Change it to:
PHP Code:
<b_pictures>1</b_pictures>  
This should be enough!

--------------------------------------------------------------------------------------------------
Ok! So these are the changes required to get weather information on the navigation map:

PHP Code:
<weather> 
<active>1</active> 
<url> 
https://b2v.bmwgroup.de/com/cdplive/cdp/release/vehicle/connnav/servlet/getOnlineWeather 
</url> 
</weather>  
And to get the weather information via bluetooth data:

PHP Code:
<aclappl> 
<appname>weather</appname> 
<appcode>41</appcode> 
<apppriority>3</apppriority> 
<devicecost>2;1</devicecost> 
<datavoicemedia>1</datavoicemedia> 
<dataclass>2;1</dataclass> 
<datatype>1</datatype> 
<switching>0</switching> 
<appbearer>2</appbearer> 
<voicedataparallel>0</voicedataparallel> 
<provmode>1</provmode> 
<audio>1</audio> 
<roaming>1</roaming> 
<mo>0</mo> 
<mt>0</mt> 
<clampfollowup>0</clampfollowup> 
<userauth>0</userauth> 
<vehauthlevel>1</vehauthlevel> 
<proxies>2,1/1,1</proxies> 
<outgoingportrange>40700-40709</outgoingportrange> 
<qospriority>0</qospriority> 
</aclappl>  
Change your files to reflect the changes in these sections and it should work! 


And FDL:

HU_NBT->3000 HMI->Funktionen->CONNECTED_DRIVE->aktiv (already aktiv)
HU_NBT->3000 HMI->Funktionen->ONLINE_BROWSER_LIVE->aktiv
HU_NBT->3003 > ONLINE_BROWSER = Beide aktiv (both aktiv)
HU_NBT->3003 > ONLINE_SERVICES = nicht_aktiv
HU_NBT->3003 > ONLINE_SERVICES_GLS = nicht_aktiv
HU_NBT->3003 > DUN_PROFILE->aktiv
HU_NBT->3003 > PAN_PROFILE->aktiv
HU_NBT->DATACOMM SIM>Aktiv
HU_NBT->BLUETOOTH_SAP_SUPPORT--> AKTIV

RESULT:

1. Only Internet via phone bluetooth data work!
2. BMW Online gives me an Internal error popup
3. NO BMW Live on connectedDrive menu
4. NO Widgets on tge splitscreen

Any help? advice?

Thx you all

[sacaman]

put your XML that i can check it for you

[niksss]

Which XML do I have to edit with the data from the post above ?

Can anyone tell me how to enable BMW Online, Internet, Weather etc ? My car is BMW E9x with NBT ID4 retrofitted. I have an emulator (obviously). I have currently coded this:

3003 > DUN_PROFILE - aktiv
3003 > PAN_PROFILE - aktiv
3003 > ONLINE_BROWSER - beide_aktiv
3003 > ONLINE_SERVICES - nicht_aktiv
3003 > ONLINE_SERVICES_GLS - nicht_aktiv
3003 > ASSIST - nicht_aktiv
3003 > ONLINE_BROWSER_LIVE - aktiv
3003 > DATACOMM_CSIM - nicht_aktiv

But nothing shows up. I have only Mobile Care, Hotline and Your Service, which show up a phone number when I press them. I read that I have to code some VO, but I doubt I can code VO on a retrofitted NBT car.

Is this going to work for me:

You actually don't need to update the modified FA into your car and you shouldn't be doing it. Instead, you should

1. Edit FA and change VIN to WBAFV31030DZ17872
2. Save as a new FA (do not use this new FA for all other purposes other than enabling BMW Live)
3. Do not write the FA to the car
3. VO code NBT (make sure you've disabled VCM and MSM update in eSYS option)
4. Go to ConnectedDrive and update service
5. Edit FA and change VIN to your car's VIN
6. VO code NBT
7. Do not update service anymore

(You also need a emulator for coding someone else's VIN into NBT)

Also what exactly does "VO code NBT" mean ? Does it mean Activate FA and then just code FDL ? Sorry for the noob questions, but I am coding with esys from yesterday.

[Rich84Ts]

I’m looking to achieve this too. Would someone let me know if they think this emulator would be suitable, I’m sure it already has a donor vin embedded but not sure if you’d be able to code it... https://rover.ebay.com/rover/0/0/0?m...2F153465728272

[Justy]

Hi, I drive a F31 2014 with Entrynav and no standard connection to the internet (Connected Drive, BMW Live BMW Online Services etc.)

In the SA List I only got this 6XX options:

606
698
6NH
6WA

So, is it possible to get BMW Live or Internet?

Have already tried some things with donor VIN, but E-Sys brings a negative response error...

Has anyone any suggestions?

Thanks

[Justy]

Nobody here who can help?

:-(

[biomed27]

Cant get bmw assist to disappear and bmw live to appear. Any help would be appreciated.