[mert95]

Hello from Germany

My Name is Mert and i own a F32 430d.

2 days ago i made a Software Update with Ista 4.39.20 with Psdzdata 4.39.20 and during the Update my car died because of a Power Supply failure .... (thats my fault it was too weak ).

Now i got a bigger Power Supply and charged the car... and its enough for Ista and Esys

Now the car starts and shifts but the Kombi, Nbt_evo and Tv_Modul are dead..

Nbt boots up and stucks on the "Flashing Time" Blue Screen but the Kombi is Lighting Up and working it only has the red dot.

I tried to flash it but the ECUs are not responsing.

If i read ECU instead of VCM the 3 ECUs are not in the SVT.

I tried today all day to repair it.

I tried injectin CAFD and i get a faulty code.

Can somebody help me?

[Siki78]

Can be flashed with esys just diese 3 ecu. If you need help, I can

[mert95]

I tried several times with esys but the 3 ecus give no response

Thank you

[Siki78]

I write you pm give me teamviewer on same

[mert95]

Thank you very much Siki78

For all other if you have something like that here you can see how it got solved

[Siki78]

It was little bit more complicated than just flashed. Navigation was stuck in bootloader mode so if you look with esys no responding from HU,kombi and TV module. First we get out from bootloader mode then was easier to flash ibad and swfl. You picture is wrong because blue is actual target should to be with 000 and red are update file

[mig2830]

Most interesting. Siki78 How do you get out of Bootloader mode?

[Siki78]

Originally Posted by mig2830

Most interesting. Siki78 How do you get out of Bootloader mode?

First you need to flash just bootloader with esys 3.27.1 other esys will not work.

[Revoltos]

Siki78, what a decent guy you are. Stepping into help immediately. Kudos to you mate!

[mert95]

He is my hero im so thankfull i cant describe that feeling that car bootet up again