[ahgu]

What tool did you use the display the injector offset? How do I tune those after replacing the injector? I get P02CF code.

Originally Posted by Enabled

If you get any chance to see injector balance, you can monitor what the DDE is doing to each injector to have a smooth engine running.

The reason it is sporadic is because it is condition dependent. A lazy injector is allowed a +4mg/stroke of fuel adaptation before triggering the error. An oddly leaky injector will be pulled to -5mg/str before triggering a different error.



This was my cyl #4 before and after putting in a new injector and coding it. Result was perfect balance again