[harkes]

Originally Posted by chaungo

There's already a ps2 ots map for 91 out. I was one of the testers for the PWG ps2 new ots maps.

http://www.bootmod3.net/log?id=59f7dbcad10b434b754dfed3

Here's my log for it.

You'll have to contact and request a "PS2 OTS stage 2 91 Oct" map and they'll send you one and you'll log and send back logs and they'll adjust from there. With the new ots map updates that just came out a month ago or so, it made a huge difference in boost linear and timing control so more power and smooth delivery.

Looks pretty good. Hopefully the team will have a similar OTS for my PWG ready soon

[afranke]

I saw the PWG OTS maps up for a moment there and grabbed the Stage 2H 93Octane one, and it did not go well for me. Only had throttle response in Sport+, and even then it felt like it was in a limp mode (though no codes). I'm assuming now that I no longer see the PWG OTS maps available, others were having issues as well and they pulled them. On the up side, they may have finally resolved my DME tamper code issue. I'll re-flash stock in the morning to find out.

[jayzF30]

afranke aren’t you a hybrid N55 car? They’re away on holidays until after new years it seems. I asked them about the OTS maps as well and they mentioned they were applying some more updates to them. My Stage 2 93 octane one is working perfect but my car isn’t a hybrid.

[SeanWRT]

No they aren't on holidays yet. Only they are working on OBD flash as top priority at this point. My local shop has been doing tests with them these days. For now it seems tuning support requests will see delay in response.

[JaredG_F30]

Dzenan told me he was going to be on holiday Dec 14th - Jan 2nd. Not sure about the rest of the team.

Originally Posted by SeanWRT

No they aren't on holidays yet. Only they are working on OBD flash as top priority at this point. My local shop has been doing tests with them these days. For now it seems tuning support requests will see delay in response.

[lens]

Originally Posted by SeanWRT

No they aren't on holidays yet. Only they are working on OBD flash as top priority at this point. My local shop has been doing tests with them these days. For now it seems tuning support requests will see delay in response.

Dzenno is actually on holidays till after new years, I would probably say the same for 50% of the team. It's the holidays! those guys deserve the break for the hard work they're doing, we should give them a few weeks to rest and spend time with their families.

Knowing Dzenno, he'll probably be able to work on some maps while he's on flight.

[FSociety]

Originally Posted by chaungo

Dzenno is actually on holidays till after new years, I would probably say the same for 50% of the team. It's the holidays! those guys deserve the break for the hard work they're doing, we should give them a few weeks to rest and spend time with their families.

Knowing Dzenno, he'll probably be able to work on some maps while he's on flight.

+1

[ronanz]

Originally Posted by chaungo

Dzenno is actually on holidays till after new years, I would probably say the same for 50% of the team. It's the holidays! those guys deserve the break for the hard work they're doing, we should give them a few weeks to rest and spend time with their families.

Knowing Dzenno, he'll probably be able to work on some maps while he's on flight.

Originally Posted by FSociety

+1

+2


.

[harkes]

This is exciting for the PWG!!!

Anyone tried the maps? I'll give it a whirl soon and share the log

[swreefkeeper]

I just got BM3 and I am a PWG with the OTS stage 2 tune. My tune says version 1. Are these new versions? Can I update my stage 2 tune version 1 to the version 3? So far loving BM3.

[SeanWRT]

Originally Posted by harkes

This is exciting for the PWG!!!

Anyone tried the maps? I'll give it a whirl soon and share the log

Wow oh oh...buddy been 2 years seems lesson still not learned so easily got excited...

Boost would be "higher", but not PS2 high. Still will be on BEF+JB4 route anyway.

[JaredG_F30]

Dyno Day results, 381 whp, 429 wtq. Video, logs and dyne graph below.

4th gear pull
Bootmod3 E30 OTS tune
CTS Turbo FMIC
CTS Turbo CAI
FTP Charge Pipe
VRSF Catless Down Pipe
Custom Exhaust

http://www.bootmod3.net/log?id=5a4589a2d10b4307dadd6db7

[Zel335]

Originally Posted by harkes

This is exciting for the PWG!!!

Anyone tried the maps? I'll give it a whirl soon and share the log

How did you get the version 3 maps?

[wjjkoevoets]

Originally Posted by JaredG_F30

Dyno Day results, 381 whp, 429 wtq. Video, logs and dyne graph below.

4th gear pull
Bootmod3 E30 OTS tune
CTS Turbo FMIC
CTS Turbo CAI
FTP Charge Pipe
VRSF Catless Down Pipe
Custom Exhaust

http://www.bootmod3.net/log?id=5a4589a2d10b4307dadd6db7

<snip>

Awesome!

[PabloK]

Originally Posted by harkes

This is exciting for the PWG!!!

Anyone tried the maps? I'll give it a whirl soon and share the log

Where is this screen shot from? I don't see it on BM3 apple app?

[ronanz]

Originally Posted by PabloK

Where is this screen shot from? I don't see it on BM3 apple app?

Can be found online via bootmod3 HERE between "My Maps" and "Tune Requests"

All maps uploaded/downloaded online will automatically populate your app

.

[PabloK]

Originally Posted by ronanz

Can be found online via bootmod3 HERE between "My Maps" and "Tune Requests"

All maps uploaded/downloaded online will automatically populate your app

.

Cool, found it.


So there's a stage 2, 93 octane Version 3.0 on there.

How is that going to be different from my current map that I've maybe done 8 revisions with but still says Version 1.0?

Car is in storage for winter so I haven't messed around with BM3 for a couple months just catching up.

[JakOG]

Originally Posted by PabloK

Cool, found it.


So there's a stage 2, 93 octane Version 3.0 on there.

How is that going to be different from my current map that I've maybe done 8 revisions with but still says Version 1.0?

Car is in storage for winter so I haven't messed around with BM3 for a couple months just catching up.

+1 ?

[harkes]

Originally Posted by PabloK

Cool, found it.


So there's a stage 2, 93 octane Version 3.0 on there.

How is that going to be different from my current map that I've maybe done 8 revisions with but still says Version 1.0?

Car is in storage for winter so I haven't messed around with BM3 for a couple months just catching up.

These are OTSs. Your own 8 revision must be a custom flash which I assume will work better for you car.

[JakOG]

Originally Posted by harkes

These are OTSs. Your own 8 revision must be a custom flash which I assume will work better for you car.

They are not a custom flash
Just revisions of the original OTS to fix problems

[JaredG_F30]

Maybe the procedure has changed recently but with both my 91 oct OTS and E30 OTS map, Dzenan made several revisions to the OTS maps based on logs before we were both happy with how the car was running.

Originally Posted by harkes

These are OTSs. Your own 8 revision must be a custom flash which I assume will work better for you car.

[proTUNING Freaks]

Originally Posted by PabloK

Cool, found it.


So there's a stage 2, 93 octane Version 3.0 on there.

How is that going to be different from my current map that I've maybe done 8 revisions with but still says Version 1.0?

Car is in storage for winter so I haven't messed around with BM3 for a couple months just catching up.

OTS maps are current version 3.0 and are available through the new OTS Maps screen. Existing users may have maps with other version numbers from them that are either previous OTS maps made using map requests or through custom tunes. We suggest everyone willing to try the new official OTS maps to just use the new feature as it allows you to stay current as new updates are released as the system will show you available updates as they become available. No more guess work when/if new maps/updates are available.

Cheers and happy 2018 everyone!