BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

shawnsheridan · 11-18-2017, 06:32 AM

Quote:

Originally Posted by AndreiX

Hey guys!
This is my first post here, glad to find such a well informed and helpful f30 community!
Could I please get the link to the apps and guides in coding? I bought a ethernet cable from ebay that should arrive soon, but the software the guy provided via email can not be downloaded. Anyway, I am sure his is not as good as any found here!
Thanks a lot!

You cannot send or receive PM's yet. Send me one when you can.

trinium · 11-18-2017, 11:30 PM

I will be sending you a pm ASAP 🙂

shawnsheridan · 11-18-2017, 11:43 PM

Quote:

Originally Posted by trinium

I will be sending you a pm ASAP 🙂

I beat you too it. PM sent.

NickVDBrink88 · 11-19-2017, 05:44 AM

Hi Shawn,

Can you send me the links ?

Greets

Nick

shawnsheridan · 11-19-2017, 07:34 AM

Quote:

Originally Posted by NickVDBrink88

Hi Shawn,

Can you send me the links ?

Greets

Nick

PM sent.

Dogmatic6 · 11-20-2017, 12:47 PM

Hi Shawn,

Can you send me the links please? I'm trying to code the itouch controller I retrofitted into my F06 GC which is a 2013 NBT

Cheers

Mark

shawnsheridan · 11-20-2017, 01:14 PM

Quote:

Originally Posted by Dogmatic6

Hi Shawn,

Can you send me the links please? I'm trying to code the itouch controller I retrofitted into my F06 GC which is a 2013 NBT

Cheers

Mark

PM sent.

sleeeper335 · 11-20-2017, 08:34 PM

Ive been looking all over and i cannot find a link for f30 daten files. Anyone have a link for them?

shawnsheridan · 11-20-2017, 08:43 PM

Quote:

Originally Posted by minigp

Ive been looking all over and i cannot find a link for f30 daten files. Anyone have a link for them?

Daten files? For INPA, and Tool32?

sleeeper335 · 11-21-2017, 04:51 PM

Quote:

Originally Posted by shawnsheridan

Daten files? For INPA, and Tool32?

For ncs. need to change vo to activate enhanced bluetooth.

shawnsheridan · 11-21-2017, 05:14 PM

Quote:

Originally Posted by minigp

For ncs. need to change vo to activate enhanced bluetooth.

No, not possible. You cannot use NCS Expert for F30 as NCS Expert is only for E-Series car. For F-Series, you need E-Sys and PSdZData. PM sent.

B58 parts · 11-21-2017, 10:53 PM

Hi Shawn - when you have a few minutes can you please PM me about the latest e-sys & PSdZData?

I'm think ready to get in and poke at this computer. I think the rev matching can be permanently disabled this way ... I've been driving around with DSC OFF and 4 snow tires.

Thanks

shawnsheridan · 11-22-2017, 07:12 AM

Quote:

Originally Posted by YuminNuman

Hi Shawn - when you have a few minutes can you please PM me about the latest e-sys & PSdZData?

I'm think ready to get in and poke at this computer. I think the rev matching can be permanently disabled this way ... I've been driving around with DSC OFF and 4 snow tires.

Thanks

PM sent.

mrtn · 11-22-2017, 07:58 AM

Hi Shawn,

Whenever you have time, could you please PM me the latest e-sys and psdzdata links (for the f30)?

Thanks a lot.

Cheers, Martijn

shawnsheridan · 11-22-2017, 09:08 AM

Quote:

Originally Posted by mrtn

Hi Shawn,

Whenever you have time, could you please PM me the latest e-sys and psdzdata links (for the f30)?

Thanks a lot.

Cheers, Martijn

PM sent.

Olly232 · 11-22-2017, 10:25 AM

Quote:

Originally Posted by 2014F32

Hi Shawn,

Brought my car to the dealership this week and they updated the software on the system. I lost every friggen code I had, and my existing setup dosent work.
Tried recoding and it wont work. I suppose I need an updated PSDZdata... do you have?

2014 F32
UPDATE: MN-003.003.001

MANY MANY THANKS!!!!

Hi Shawn,

I expect that I'll have the same problem too as the dealer updated my software yesterday and reset all my coding changes. May I please have the latest coding files.

Many thanks.

shawnsheridan · 11-22-2017, 10:28 AM

Quote:

Originally Posted by Olly232

Hi Shawn,

I expect that I'll have the same problem too as the dealer updated my software yesterday and reset all my coding changes. May I please have the latest coding files.

Many thanks.

PM sent.

Molsbrov · 11-22-2017, 01:10 PM

Hi Shawn,

Can you send me the after an hour? I don't have PM system yet activated..

With many thanks
Molsbrov

shawnsheridan · 11-22-2017, 01:11 PM

Quote:

Originally Posted by Molsbrov

Hi Shawn,

Can you send me the after an hour? I don't have PM system yet activated..

With many thanks
Molsbrov

No, sorry. Wait one hour and then send me a PM.

fmonteiro444 · 11-22-2017, 01:16 PM

Is there any way to adjust the actual vehicle speed? Maybe through the hidden menu?

I have already coded the car for actual speed instead of the digitally corrected speed. But I just put on wider tires and now the speedometer is off by 5 mph.

GDLF. · 11-22-2017, 01:40 PM

Is there still a method to "delete" vmax in a brand new M240i?

I know there was a possible method with coding the DME within the first 10 working hours of the engine. Is this still possible with the latest I-Level?

Can anyone confirm that this is possible and tell me the exact coding?

Thanks in advance!

shawnsheridan could you also send me the latest Launcher+E-Sys+Psdzdata?

Thanks mate!

Olly232 · 11-26-2017, 09:23 AM

Quote:

Originally Posted by Olly232

Hi Shawn,

I expect that I'll have the same problem too as the dealer updated my software yesterday and reset all my coding changes. May I please have the latest coding files.

Many thanks.

Thanks to Shawn the new PSdZData did the trick. The one I had from last year didn't work with the recent dealer applied update.

11-18-2017, 11:30 PM	#12674
trinium Registered 2 Rep 1 Posts Drives: F34 328 GT Xdrive Join Date: Nov 2017 Location: So-Cal iTrader: (0)	Thanks for the info I will be sending you a pm ASAP 🙂
	Appreciate 0 Quote

11-19-2017, 05:44 AM	#12676
NickVDBrink88 New Member 0 Rep 5 Posts Drives: F30 320D Join Date: Nov 2017 Location: The Netherlands iTrader: (0)	Hi Shawn, Can you send me the links ? Greets Nick
	Appreciate 0 Quote

11-20-2017, 12:47 PM	#12678
Dogmatic6 New Member 6 Rep 28 Posts Drives: BMW X4M Competition Join Date: Apr 2016 Location: Glasgow iTrader: (0)	Hi Shawn, Can you send me the links please? I'm trying to code the itouch controller I retrofitted into my F06 GC which is a 2013 NBT Cheers Mark
	Appreciate 0 Quote

11-20-2017, 08:34 PM	#12680
sleeeper335 Private First Class 22 Rep 100 Posts Drives: 335i Join Date: Apr 2015 Location: PA iTrader: (0)	Ive been looking all over and i cannot find a link for f30 daten files. Anyone have a link for them?
	Appreciate 0 Quote

11-21-2017, 10:53 PM	#12684
B58 parts Captain 473 Rep 796 Posts Drives: '17 340ix 6MT Join Date: Nov 2017 Location: US iTrader: (0)	Hi Shawn - when you have a few minutes can you please PM me about the latest e-sys & PSdZData? I'm think ready to get in and poke at this computer. I think the rev matching can be permanently disabled this way ... I've been driving around with DSC OFF and 4 snow tires. Thanks
	Appreciate 0 Quote

11-22-2017, 07:58 AM	#12686
mrtn New Member 6 Rep 13 Posts Drives: - Join Date: Nov 2010 Location: Netherlands iTrader: (0)	Hi Shawn, Whenever you have time, could you please PM me the latest e-sys and psdzdata links (for the f30)? Thanks a lot. Cheers, Martijn
	Appreciate 0 Quote

11-22-2017, 01:10 PM	#12690
Molsbrov Registered 1 Rep 4 Posts Drives: 330d xDrive Join Date: Nov 2017 Location: Finland iTrader: (0)	Hi Shawn, Can you send me the after an hour? I don't have PM system yet activated.. With many thanks Molsbrov
	Appreciate 0 Quote

11-22-2017, 01:16 PM	#12692
fmonteiro444 Captain 321 Rep 710 Posts Drives: 23 M3 Competition Join Date: Feb 2013 Location: NJ iTrader: (5) Garage List 2014 BMW 335i xDriv ... [0.00]	Is there any way to adjust the actual vehicle speed? Maybe through the hidden menu? I have already coded the car for actual speed instead of the digitally corrected speed. But I just put on wider tires and now the speedometer is off by 5 mph. __________________ 14 F30 N55 AWD SpeedTech EFR-8374, E70 MHD, Motive tuned 23 M3 Competition - Stock
	Appreciate 0 Quote

11-22-2017, 01:40 PM	#12693
GDLF. Enlisted Member 14 Rep 44 Posts Drives: 2019 G01 X3 M40i Join Date: Nov 2016 Location: West Germany, NRW iTrader: (0)	Is there still a method to "delete" vmax in a brand new M240i? I know there was a possible method with coding the DME within the first 10 working hours of the engine. Is this still possible with the latest I-Level? Can anyone confirm that this is possible and tell me the exact coding? Thanks in advance! shawnsheridan could you also send me the latest Launcher+E-Sys+Psdzdata? Thanks mate! Last edited by GDLF.; 11-22-2017 at 01:47 PM..
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search