[Almaretto]

Originally Posted by jaco_ma

The reasons for BMW to "get it" I do not know and obviously they will not explain it to me ...

The only thing he asked again was in case someone had found a way to activate it again.


A greeting

Still no. Locked by software. Good luck in search.

[jaco_ma]

They have not yet released the encoding of the number of flashes?

Nobody has got it ??

[Almaretto]

Originally Posted by jaco_ma

They have not yet released the encoding of the number of flashes?

Nobody has got it ??

Still no.

[jaco_ma]

We will continue to have faith ...

[Almaretto]

Originally Posted by jaco_ma

We will continue to have faith ...

Anything is possible. IDrive5/6 has option to toggle. Though, only works on G-series.

[haagm58]

Originally Posted by jaco_ma

No one has done it in a current F30?

I was able to change the number of flashes using the app BimmerCode with the OBDII WiFi gateway

[Almaretto]

Originally Posted by haagm58

I was able to change the number of flashes using the app BimmerCode with the OBDII WiFi gateway

On a 2014 that has not been updated to or beyond 3.61 (March '17 software)?

[jaco_ma]

Originally Posted by Almaretto

Anything is possible. IDrive5/6 has option to toggle. Though, only works on G-series.

Good news, no doubt, to see if it spreads.

The only thing is that I hope that there is no need to update the software of the car to get it ...

[jaco_ma]

Originally Posted by haagm58

I was able to change the number of flashes using the app BimmerCode with the OBDII WiFi gateway

Still in the most modern cars?

Before updating the Soft. of the car, I could do both with Carly and with E-sys, now I have not found the way.

[haagm58]

Originally Posted by jaco_ma

Still in the most modern cars?

Before updating the Soft. of the car, I could do both with Carly and with E-sys, now I have not found the way.

Originally Posted by jaco_ma

Still in the most modern cars?

Before updating the Soft. of the car, I could do both with Carly and with E-sys, now I have not found the way.

Originally Posted by Almaretto

On a 2014 that has not been updated to or beyond 3.61 (March '17 software)?

This is the version on my car presently.

[Almaretto]

Originally Posted by haagm58

This is the version on my car presently.

You are using that PSdZ or your vehicle has that version? Bimmercode shows you software version?

[haagm58]

Originally Posted by Almaretto

You are using that PSdZ or your vehicle has that version? Bimmercode shows you software version?

Sorry, the picture didn't upload to my reply. I updated my car's software recently before using BimmerCode.

[Almaretto]

Originally Posted by haagm58

Sorry, the picture didn't upload to my reply. I updated my car's software recently before using BimmerCode.

You are lucky that it worked, because that is a first.

[jaco_ma]

Originally Posted by haagm58

Sorry, the picture didn't upload to my reply. I updated my car's software recently before using BimmerCode.

Could you specify the level of integration that your car has? to know if in mine I could also get the 5 flash flashing with BimmerCode.

[jaco_ma]

Have you found any way to activate it, thanks to the G Series?

[wybielacz]

Originally Posted by Almaretto

Anything is possible. IDrive5/6 has option to toggle. Though, only works on G-series.

But this is clearly a BMW 4 cabrio F33 on the picture. Or does it just have no effect on that car?

[Almaretto]

Originally Posted by wybielacz

But this is clearly a BMW 4 cabrio F33 on the picture. Or does it just have no effect on that car?

Worst case scenario, assuming you follow coding guidelines, is it does not work and you code functions back.

[Skyhigh]

I am joining the club of people looking for a solution to increase the number of blinks to 5 on an F36 LCI... There must be a way.

[wybielacz]

So the reason why we currently cannot set this anymore is because BMW disabled the BLINKZYKLEN_ANZAHL_TIPP coding parameter and replaced it with PIA_DEFAULT_TIPPBLINKEN in the newer firmware. Unfortunately PIA_DEFAULT_TIPPBLINKEN on FEM_Body has a bitmask which only allows 0 or 1 as an valid value, on BDC_Body vehicles the bitmask allows more values that is why it is working there.

I was thinking that it should be possible to change the bitmask in the firmware itself with a hex editor, flash the modified firmware to the car and afterwards set a value greater then 1, this at least should theoretically work.
My question is if someone already tried to hex edit an ECU firmware? Finding the right spot should not be an issue but maybe the firmware files are signed?

[IAmATeaf]

Perhaps TIPPBLINKEN is a default override to activate/deactivate the other parameter? Has anybody tried flicking TIPPBLINKEN to them see if the other works?

On the other hand I could be talking rubbish 😂

[Skyhigh]

Originally Posted by IAmATeaf

Perhaps TIPPBLINKEN is a default override to activate/deactivate the other parameter? Has anybody tried flicking TIPPBLINKEN to them see if the other works?

This is exactly what I thought when I saw it but I did not try it.
Anyone?

[jaco_ma]

Originally Posted by IAmATeaf

Perhaps TIPPBLINKEN is a default override to activate/deactivate the other parameter? Has anybody tried flicking TIPPBLINKEN to them see if the other works?

On the other hand I could be talking rubbish ��

Originally Posted by Skyhigh

This is exactly what I thought when I saw it but I did not try it.
Anyone?

Yes, I have tried different combinations in "BLINKZYKLEN_ANZAHL_TIPP" and also in "PIA_DEFAULT_TIPPBLINKEN" without any success.

If a partner based on trying gets something, it would be great ...