BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

avgor123 · 03-29-2015, 06:37 AM

Quote:

Originally Posted by mikroob

I have remove the 845 word from SALPA right now, and there is no effect for my car, do you have any suggestions?

You have to use OI11 K-Word.

mikroob · 03-29-2015, 06:43 AM

Quote:

Originally Posted by avgor123

You have to use OI11 K-Word.

This is working! Thank you!

My airbag is still working when I'm using my seatbelt?

shawnsheridan · 03-29-2015, 06:43 AM

Yes, use HO-Wort's OI11 for Driver's side and OI12 for Passenger's side.

avgor123 · 03-29-2015, 06:50 AM

Quote:

Originally Posted by mikroob

This is working! Thank you!

My airbag is still working when I'm using my seatbelt?

Yes, of course.

avgor123 · 03-29-2015, 06:53 AM

Quote:

Originally Posted by shawnsheridan

Yes, use HO-Wort's OI11 for Driver's side and OI12 for Passenger's side.

There is no passenger presence sensor in cars made for RF ((
So OI12 is not usable.

garybuk · 03-30-2015, 09:41 AM

Hi, would you be able to send a link to the software?

I have ordered a cable.

Thanks!

bobbydigital · 03-30-2015, 02:57 PM

We should host the files on a BitTorrent Sync share. I'm happy to start it if someone wants to give me a link to the latest. I have gigabit internet connection at my place is seeding should be reasonably fast, and if multiple people were, it'll be a rocket.

This way we don't have to rely on slow hosting services.

brettspencer131 · 03-31-2015, 03:41 PM

I got my cable but like the posters above, all the links are dead. Anyone able to help out?

shawnsheridan · 03-31-2015, 04:03 PM

Quote:

Originally Posted by avgor123

There is no passenger presence sensor in cars made for RF ((
So OI12 is not usable.

I am sure some folks with LHD cars can benefit from the information.

shawnsheridan · 03-31-2015, 04:11 PM

Quote:

Originally Posted by garybuk

Hi, would you be able to send a link to the software?

I have ordered a cable.

Thanks!

Quote:

Originally Posted by bobbydigital

We should host the files on a BitTorrent Sync share. I'm happy to start it if someone wants to give me a link to the latest. I have gigabit internet connection at my place is seeding should be reasonably fast, and if multiple people were, it'll be a rocket.

This way we don't have to rely on slow hosting services.

PM's sent.

shawnsheridan · 03-31-2015, 04:12 PM

Quote:

Originally Posted by brettspencer131

I got my cable but like the posters above, all the links are dead. Anyone able to help out?

You cannot send or receive PM's yet. Send me one when you can.

demig · 04-01-2015, 06:05 AM

Shawn,

Would you be so kind to pm me the links, just got my F31 after several happy years with an E91, might be pointless as it's quite new but fingers crossed I still have coding opportunities

Thanks

Demig

shawnsheridan · 04-01-2015, 10:52 AM

Quote:

Originally Posted by demig

Shawn,

Would you be so kind to pm me the links, just got my F31 after several happy years with an E91, might be pointless as it's quite new but fingers crossed I still have coding opportunities

Thanks

Demig

PM sent.

Burnt C6 · 04-01-2015, 01:15 PM

I'm sure that somewhere in this thread the question has been answered. I've searched but can't seem to find it. Can the top speed limiter be coded out of our cars? I have the Sport model and have done quite a bit of work to the car. I tracked it at COTA a few weekends back and hit the speed limiter of 130 MPH real quick. (that sucked big time) I'd like to just turn it off. I know the M Sport goes to 150 which would be better. I'm told that if you ordered the car with summer tires it was also set higher. HELP

Thanks

shawnsheridan · 04-01-2015, 01:16 PM

Quote:

Originally Posted by Burnt C6

I'm sure that somewhere in this thread the question has been answered. I've searched but can't seem to find it. Can the top speed limiter be coded out of our cars? ...

Not possible by coding. DME is locked after 10 hours.

Iceman777 · 04-03-2015, 05:30 PM

Quote:

Originally Posted by shawnsheridan

You can use TokenMaster's NCD / CAFD Tool, FA Viewer function, and see them yourself now:

http://www.bimmerfest.com/forums/sho...&postcount=108

OK I am new at this. I have everything installed But what do I do with the NcdCafdTool_V0.2.8? Do I just copy it to the C:\ drive or must I copy it to a folder and the run the exe file?

shawnsheridan · 04-03-2015, 10:20 PM

Quote:

Originally Posted by Iceman777

OK I am new at this. I have everything installed But what do I do with the NcdCafdTool_V0.2.8? Do I just copy it to the C:\ drive or must I copy it to a folder and the run the exe file?

Just extract the package and put the folder wherever you like, and run the .exe.

Agie · 04-04-2015, 12:12 PM

Hi Shawn,

I coded ICMKOD_B_InitEco to verbaut, i got airbag error message.
I coded back to the default, it had the same error message.
But when I turned on the engine, the message is gone.
Is this normal? Thanks.

bobbydigital · 04-04-2015, 06:03 PM

Fyi - The 54.1 files and e-sys are on BitTorrent sync now which should be faster than Mega downloads (which failed like crazy for me).

Also would be helpful even if you have the files to sync so it will be faster for everyone.

PM me or Shawn for info.

tyana · 04-05-2015, 12:29 PM

Hi Shawn

Could you share the links for coding files?

Thanks

shawnsheridan · 04-05-2015, 12:51 PM

Quote:

Originally Posted by tyana

Hi Shawn

Could you share the links for coding files?

Thanks

PM sent.

shawnsheridan · 04-05-2015, 12:52 PM

Quote:

Originally Posted by Agie

Hi Shawn,

I coded ICMKOD_B_InitEco to verbaut, i got airbag error message.
I coded back to the default, it had the same error message.
But when I turned on the engine, the message is gone.
Is this normal? Thanks.

Errors routinely show up as a result of coding, and then disappear almost immediately. So long as it want away, you are fine.

03-29-2015, 06:43 AM	#8385
shawnsheridan General 10413 Rep 40,650 Posts Drives: 2018 Alpina B6 650ix GC Join Date: Feb 2010 Location: Houston, TX iTrader: (0) Garage List 2018 F06 Alpina B6 ... [8.35]	Yes, use HO-Wort's OI11 for Driver's side and OI12 for Passenger's side. __________________ 2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
	Appreciate 0 Quote

03-30-2015, 09:41 AM	#8388
garybuk Registered 0 Rep 3 Posts Drives: BMW 2007 E92 320i Join Date: Nov 2010 Location: Manchester iTrader: (0)	Hi, would you be able to send a link to the software? I have ordered a cable. Thanks!
	Appreciate 0 Quote

03-30-2015, 02:57 PM	#8389
bobbydigital Lieutenant 136 Rep 498 Posts Drives: 2015 BWM 435GC Join Date: Mar 2015 Location: Seattle, WA iTrader: (0)	We should host the files on a BitTorrent Sync share. I'm happy to start it if someone wants to give me a link to the latest. I have gigabit internet connection at my place is seeding should be reasonably fast, and if multiple people were, it'll be a rocket. This way we don't have to rely on slow hosting services.
	Appreciate 0 Quote

03-31-2015, 03:41 PM	#8390
brettspencer131 Registered 0 Rep 1 Posts Drives: 2013 F30 335i Join Date: Jul 2014 Location: Canada iTrader: (0)	Wondering about software I got my cable but like the posters above, all the links are dead. Anyone able to help out?
	Appreciate 0 Quote

04-01-2015, 06:05 AM	#8394
demig Private 0 Rep 51 Posts Drives: BMW 420D MSport GC(F36) & Z3 Join Date: Jan 2011 Location: Northumberland iTrader: (0)	Shawn, Would you be so kind to pm me the links, just got my F31 after several happy years with an E91, might be pointless as it's quite new but fingers crossed I still have coding opportunities Thanks Demig
	Appreciate 0 Quote

04-01-2015, 01:15 PM	#8396
Burnt C6 First Lieutenant 258 Rep 319 Posts Drives: 2024 X3 M40i Join Date: Sep 2014 Location: Katy Texas iTrader: (0)	I'm sure that somewhere in this thread the question has been answered. I've searched but can't seem to find it. Can the top speed limiter be coded out of our cars? I have the Sport model and have done quite a bit of work to the car. I tracked it at COTA a few weekends back and hit the speed limiter of 130 MPH real quick. (that sucked big time) I'd like to just turn it off. I know the M Sport goes to 150 which would be better. I'm told that if you ordered the car with summer tires it was also set higher. HELP Thanks __________________ 2024 X3 M40i. wife says no Mods since it's aLease.. I see a JB4 tune in the near future. 2014 328i Melbourne Red Sport Line Dinan Dinantronics tune, Dinan Exhaust, Dinan Suspension, H&R Sway bars, 18x9 APEX PS-7 ,AFE CAI, BMW M Performance Brakes Retired
	Appreciate 0 Quote

04-04-2015, 12:12 PM	#8400
Agie New Member 0 Rep 13 Posts Drives: 2014 BMW 328i black saphire Join Date: Mar 2015 Location: USA iTrader: (0)	Hi Shawn, I coded ICMKOD_B_InitEco to verbaut, i got airbag error message. I coded back to the default, it had the same error message. But when I turned on the engine, the message is gone. Is this normal? Thanks.
	Appreciate 0 Quote

04-04-2015, 06:03 PM	#8401
bobbydigital Lieutenant 136 Rep 498 Posts Drives: 2015 BWM 435GC Join Date: Mar 2015 Location: Seattle, WA iTrader: (0)	Fyi - The 54.1 files and e-sys are on BitTorrent sync now which should be faster than Mega downloads (which failed like crazy for me). Also would be helpful even if you have the files to sync so it will be faster for everyone. PM me or Shawn for info.
	Appreciate 0 Quote

04-05-2015, 12:29 PM	#8402
tyana Registered 0 Rep 1 Posts Drives: 3.20ied Join Date: Apr 2015 Location: Turkey iTrader: (0)	Hi Shawn Could you share the links for coding files? Thanks
	Appreciate 0 Quote