[mdejongh74]

Hi,

After trying to code a couple of new items today getting on both HU_CIC and CMB_Media the below error message.

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started. [C205]
ExecutionID=2013/06/08-22:06:17.808
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[CMB_MEDIA - 36] prepareECUforCoding started
[CMB_MEDIA - 36] prepareECUforCoding finished
[CMB_MEDIA - 36] authenticateECUforCoding started
[CMB_MEDIA - 36] authenticateECUforCoding finished
[CMB_MEDIA - 36 - cafd_000005b6-004_002_010] Transaction type: cdDeploy; Message: TA started
[CMB_MEDIA - 36 - cafd_000005b6-004_002_010] Transaction type: cdDeploy; Message: TA finished
[CMB_MEDIA - 36] finalizeECUCoding started
[CMB_MEDIA - 36] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "Finished". [C207]
TAL execution finished. Duration: "8s". [C206]
MSM update: Read current SVT. [C194]
MSM update started. [C215]
MSM update finished. [C216]
VCM Update: Write FA to VCM. [C188]
VCM Update: Write FP to VCM. [C190]
VCM Update: Read current SVT. [C191]
VCM Update: Check current SVT with TAL. [C192]
VCM Update: Write target SVT. [C193]
VCM Update: Write FA to backup. [C189]
VCM Update: finished with error. [C196]
Error in VCM Update:
Write FA to the Backup Partner failed. Possibly there is no connection to the Backup Partner. [C097]
job failed with negative response error:
code: service returned global negative response
description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; ECU: VCM_BACKUP_ETHERNET
severity: ERROR
[433] - VEHICLE_ERROR

All new coded items seem to work fine, but I'm a little bit woried about the "VCM_BACKUP_ETHERNET" error messsge part.

I'm using E-sys v.3.22.5, PSdZData-48.3 Car I-Step: F020-12-11-502

Previous week completed addditional coding item and all completed without error's.
Additionally tried to revert back to CAR org/basic setting using the backup CAF and SVT files but the "Backup Error" message remains.
Any ideas related to this coding error / message?
M Thanks,
M.

[mdejongh74]

Originally Posted by mdejongh74

Hi,

After trying to code a couple of new items today getting on both HU_CIC and CMB_Media the below error message.

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started. [C205]
ExecutionID=2013/06/08-22:06:17.808
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[CMB_MEDIA - 36] prepareECUforCoding started
[CMB_MEDIA - 36] prepareECUforCoding finished
[CMB_MEDIA - 36] authenticateECUforCoding started
[CMB_MEDIA - 36] authenticateECUforCoding finished
[CMB_MEDIA - 36 - cafd_000005b6-004_002_010] Transaction type: cdDeploy; Message: TA started
[CMB_MEDIA - 36 - cafd_000005b6-004_002_010] Transaction type: cdDeploy; Message: TA finished
[CMB_MEDIA - 36] finalizeECUCoding started
[CMB_MEDIA - 36] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "Finished". [C207]
TAL execution finished. Duration: "8s". [C206]
MSM update: Read current SVT. [C194]
MSM update started. [C215]
MSM update finished. [C216]
VCM Update: Write FA to VCM. [C188]
VCM Update: Write FP to VCM. [C190]
VCM Update: Read current SVT. [C191]
VCM Update: Check current SVT with TAL. [C192]
VCM Update: Write target SVT. [C193]
VCM Update: Write FA to backup. [C189]
VCM Update: finished with error. [C196]
Error in VCM Update:
Write FA to the Backup Partner failed. Possibly there is no connection to the Backup Partner. [C097]
job failed with negative response error:
code: service returned global negative response
description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; ECU: VCM_BACKUP_ETHERNET
severity: ERROR
[433] - VEHICLE_ERROR

All new coded items seem to work fine, but I'm a little bit woried about the "VCM_BACKUP_ETHERNET" error messsge part.

I'm using E-sys v.3.22.5, PSdZData-48.3 Car I-Step: F020-12-11-502

Previous week completed addditional coding item and all completed without error's.
Additionally tried to revert back to CAR org/basic setting using the backup CAF and SVT files but the "Backup Error" message remains.
Any ideas related to this coding error / message?
M Thanks,
M.

Gent's Apologies .......
Figured out this morning why the error message was displayed.
I selected the wrong connection Target setting for my F30 car (F25_DIRECT instead of F20_DIRECT) within E-Sys.
After selecting the correct value all coding is now working perfectly (VCM_BACKUP_ETHERNET errors gone).
Apperantly missed this setting yesterday evening ....
Regards,
Martin

[Frogman]

Originally Posted by mdejongh74

Gent's Apologies .......
Figured out this morning why the error message was displayed.
I selected the wrong connection Target setting for my F30 car (F25_DIRECT instead of F20_DIRECT) within E-Sys.
After selecting the correct value all coding is now working perfectly (VCM_BACKUP_ETHERNET errors gone).
Apperantly missed this setting yesterday evening ....
Regards,
Martin

I always connect to F020 *without* the _DIRECT as per the instructions. I haven't tried using the _DIRECT one.

Anyone know what the difference is?