[Almaretto]

Originally Posted by 37psi

Thanks

[Crasherr]

Can I please get the latest link please Shawn, Thank you

[shawnsheridan]

Originally Posted by Crasherr

Can I please get the latest link please Shawn, Thank you

PM sent.

[rob10k8]

Just picked up a 2015 F32. Can't wait to try this!

[F30TomUk]

Originally Posted by Almaretto

Fxx-/Ixx-/Gxx-series Coding: (No Request) Latest Software Links

Thanks Almaretto!

[Almaretto]

Originally Posted by F30TomUk

Thanks Almaretto!

[ramonE90-NL]

Is it possible to add lane change warning, and blind spot detection in the hud? I dont have the buttons for it. But maybe it can be set to always be on?

[Almaretto]

Originally Posted by ramonE90-NL

Is it possible to add lane change warning, and blind spot detection in the hud? I dont have the buttons for it. But maybe it can be set to always be on?

Lane change but not blind spot as far as I know. Though, I think it looks crowded and I coded off.

[davejack]

Hi,guy!
Could you take some coding cases you done as example to share with us,just like these:
BMW F15 X5 FDL Coding HUD Head-up display
BMW F Series Sport Display Coding Guide
You would better to post with pics,so that we can imitate your posts.

[rob10k8]

I was looking through this thread couldn't find any details around enable the anti-dazzle feature. Is there somewhere I can find that?

I'm new to the forum, so not sure if I can accept PMs yet....

Rob

[Almaretto]

Originally Posted by rob10k8

I was looking through this thread couldn't find any details around enable the anti-dazzle feature. Is there somewhere I can find that?

I'm new to the forum, so not sure if I can accept PMs yet....

Rob

NGHB only work on Pre-LCI F3x. Is that what you are trying to code?

[rob10k8]

Originally Posted by Almaretto

NGHB only work on Pre-LCI F3x. Is that what you are trying to code?

I think so... New to BMW, so those are new terms for me, but I think I found what they mean. My F32 is 2015, I believe that is pre-LCI?

[Almaretto]

Originally Posted by rob10k8

I think so... New to BMW, so those are new terms for me, but I think I found what they mean. My F32 is 2015, I believe that is pre-LCI?

How-To PDF.

[rob10k8]

Originally Posted by Almaretto

How-To PDF.

Thanks!

Rob

[Almaretto]

Originally Posted by rob10k8

Thanks!

Rob

[acevesf]

Hey all I recently picked up an ‘17 f36. Is the first post still up to date and accurate? Is that the same cable I need to order?

[Almaretto]

Originally Posted by acevesf

Hey all I recently picked up an ‘17 f36. Is the first post still up to date and accurate? Is that the same cable I need to order?

Info is dated. You can get any ENET from Ebay, Amazon, or Bimmergeeks.

[Texasdoc1]

Originally Posted by Texasdoc1

OK, looking at all the coding options, I *may* want to change a few other things....

So, is this the parameter that I change? Change this to "aktiv"?

FEM_BODY, 3040, CLM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK
FEM_BODY, 3090, TEMP_LEHNE_FTUFE_*_FRONT to a lower HEX value? FEM_BODY, 3110, ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN.

How do I tell which headunit I have? 6NH, 6NK, or 6NS, what is NBT, or CIC?
I have a 2016 with NAV.

Thanks in advance? Can't wait to get my cable from Amazon.

(By the way, not ANY E-SYS cable from Amazon will work. Purchased "Eximtrade OBD2 to ENET for F-Series..." one, had to return it. It was wired completely wrong.)

Since nobody responded to my previous post.... I went ahead and tried to connect. Following the "Getting Started Coding" Parts 1-3.

Psdzdata 3.62.3.000 (deleted old, copied to C:\Data)
Launcher 2.7.1.135 (Car Series F030) Runs fine.
E-sys 3.27.1 (Target F020 - not direct) Finds the VIN, Click Read, Loads.
Expert Mode, Click Coding, Click the Read button, FAList shows up.
Instructions say to click "Read (VCM)" under SVT Actual. My button says "Read (SVT)". Click it anyway. It loads lots of stuff in the SVT window.

Now instructions say to click CAS, CAFD_xxxxx. I don't have that. I'm looking to change FEM_BODY, so I click on CAFD____ under FEM_Body and click "Read Coding Data". I get an error stating :

FEM_BODY [40] [Kxxxxxx]
readCPS o.k.
CAFD_00000794_014_040_122 Fehler:
File for "cafd_00000794-014_040_122" not found! [C012]

What am I doing wrong?

[shawnsheridan]

Originally Posted by Texasdoc1

...I don't have that. I'm looking to change FEM_BODY, so I click on CAFD____ under FEM_Body and click "Read Coding Data". I get an error stating :

FEM_BODY [40] [Kxxxxxx]
readCPS o.k.
CAFD_00000794_014_040_122 Fehler:
File for "cafd_00000794-014_040_122" not found! [C012]

What am I doing wrong?

You haven't read this whole thread?

Scroll up to post # 9212:

http://f30.bimmerpost.com/forums/sho...postcount=9212

[Almaretto]

Originally Posted by Texasdoc1

(By the way, not ANY E-SYS cable from Amazon will work. Purchased "Eximtrade OBD2 to ENET for F-Series..." one, had to return it. It was wired completely wrong.)

Since nobody responded to my previous post.... I went ahead and tried to connect. Following the "Getting Started Coding" Parts 1-3.

Psdzdata 3.62.3.000 (deleted old, copied to C:\Data)
Launcher 2.7.1.135 (Car Series F030) Runs fine.
E-sys 3.27.1 (Target F020 - not direct) Finds the VIN, Click Read, Loads.
Expert Mode, Click Coding, Click the Read button, FAList shows up.
Instructions say to click "Read (VCM)" under SVT Actual. My button says "Read (SVT)". Click it anyway. It loads lots of stuff in the SVT window.

Now instructions say to click CAS, CAFD_xxxxx. I don't have that. I'm looking to change FEM_BODY, so I click on CAFD____ under FEM_Body and click "Read Coding Data". I get an error stating :

FEM_BODY [40] [Kxxxxxx]
readCPS o.k.
CAFD_00000794_014_040_122 Fehler:
File for "cafd_00000794-014_040_122" not found! [C012]

What am I doing wrong?

Cafd not found means you need different PSdZ, usually an upgrade.

I do not mean any ENET would work, but they are less likely prone to be wired wrong/faulty as K+DCAN's. It is wise to buy from seller with good rating.

[shawnsheridan]

Originally Posted by Almaretto

Cafd not found means you need different PSdZ, usually an upgrade...

True, but in the specific case of cafd_00000794-014_040_122, BMW dropped it from PSdZData package a very long time ago. He will have to download and add this CAFD to his current PSdZData folder from my Link above.

[Texasdoc1]

Thank you! It will likely be next week before I can try again.