[goj]

Originally Posted by insanecoder

Why the decision not to reuse the exhaust valve actuator.. Remus is reutilizing it and gives some adjustibility to the sound

Remus looks appealing for this reason

[Dinan_Engineering]

340i Mid-pipe is now live and will begin shipping next week.

URL for information and pricing: http://www.dinancars.com/product/d66...ries&mid=1237/

[goj]

Will the midpipe work with the M performance muffler? Or are the lengths/geometries off?

[Thus]

Will the midpipe be compatible with Xdrive models?

[Dinan_Engineering]

Originally Posted by goj

Will the midpipe work with the M performance muffler? Or are the lengths/geometries off?

Never tested it but I would be shocked if it didn't fit. I would assume the M-Performance muffler would use the same locators as the stock exhaust being from the factory and all.

Originally Posted by Thus

Will the midpipe be compatible with Xdrive models?

Yes.

[goj]

Originally Posted by Dinan_Engineering

Never tested it but I would be shocked if it didn't fit. I would assume the M-Performance muffler would use the same locators as the stock exhaust being from the factory and all.

Yes.

I would love to offer up a car for you to test it on! I am in San Jose

[dotjonnL]

Would this work on the 335i?

[Dinan_Engineering]

Originally Posted by dotjonnL

Would this work on the 335i?

While they are similar... it would not fit. This only applies to the F30 340i.

[Poon Stick]

Any plans to sell the midpipe and muffler as a kit?

If installing the pair together is there a need to cut the original exhaust at the punch point? Or can you just drop the entire stock exhaust?
(Just thinking about returning to factory spec)

[Dinan_Engineering]

Originally Posted by Poon Stick

Any plans to sell the midpipe and muffler as a kit?

If installing the pair together is there a need to cut the original exhaust at the punch point? Or can you just drop the entire stock exhaust?
(Just thinking about returning to factory spec)

No plans for a bundle kit that I am aware of. In theory you could just drop the entire exhaust and just do the one cut after the CAT.

[gkmunch]

Originally Posted by Dinan_Engineering

No plans for a bundle kit that I am aware of. In theory you could just drop the entire exhaust and just do the one cut after the CAT.

Do you even have to do a cut after the cat? The instructions .pdf makes it seem like the OEM cat/midpipe connection is a slip fit from the factory. It seems like you could just drop the whole OEM exhaust with no cutting, then install the Dinan midpipe and axleback.

http://files.dinancars.com/webresour...df6963981e.pdf

[Dinan_Engineering]

Originally Posted by gkmunch

Do you even have to do a cut after the cat? The instructions .pdf makes it seem like the OEM cat/midpipe connection is a slip fit from the factory. It seems like you could just drop the whole OEM exhaust with no cutting, then install the Dinan midpipe and axleback.

http://files.dinancars.com/webresour...df6963981e.pdf

I stand corrected. Released a bunch of resonator deletes/midpipes all together so maybe I just confused which application with what variant of pipe. Whatever the excuse, doesn't matter, you are correct. =)

[SLOWER]

Is there a video of the mid pipe on a car with an OEM muffler?

[Dinan_Engineering]

Originally Posted by SLOWER

Is there a video of the mid pipe on a car with an OEM muffler?

Unfortunately there is not. Once the car comes back to the shop (on temporary loan) I will see if I can get the guys to put the stock exhaust back on so I can get a quick video.

[Big Nodge]

Dinan, you should take goj up on his offer to test-fit your midpipe with the 340i MPE, I think that could be a popular combo. Similar cost to AWE's exhaust with midpipe, but I imagine with slightly less aggressive tone. Confirmation of fitment and a video to assess sound would be helpful.

[gpon]

Originally Posted by Big Nodge

Dinan, you should take goj up on his offer to test-fit your midpipe with the 340i MPE, I think that could be a popular combo. Similar cost to AWE's exhaust with midpipe, but I imagine with slightly less aggressive tone. Confirmation of fitment and a video to assess sound would be helpful.

I'd be very interested in seeing this set up now that I've given up all hope on the MPPSK.

[Big Nodge]

Originally Posted by gpon

I'd be very interested in seeing this set up now that I've given up all hope on the MPPSK.

That's what I'm thinking. Would be a nice option for those wanting an OEM+ style exhaust setup that includes a full midpipe like the MPPSK.

[shoguniori31]

Originally Posted by Dinan_Engineering

Crude version of DINANTRONICS is on the car but there is still a lot of development to go on the platform. Still way to many variables at play to really give any estimated time table. Would be throwing a dart at the wall.

3D printed variants of the intake have been being tested. I believe the engineers have settled on a specific design and have ordered molds and what not but to be honest I haven't been following that project too closely.

You guys have an exhaust and mid-pipe for 2016 f32 428i? i looked in your website and didnt find any

[Dinan_Engineering]

Originally Posted by shoguniori31

You guys have an exhaust and mid-pipe for 2016 f32 428i? i looked in your website and didnt find any

Exhaust, yes (see link below). Mid-pipe, no. I don't foresee us doing a midpipe for the N20/26 cars either I am afraid.

http://www.dinancars.com/product/d66...ries&mid=1165/

[riskmaker76]

What about 440i Grand Coupe? Any love?

[Dinan_Engineering]

Originally Posted by mikelebron

What about 440i Grand Coupe? Any love?

Never seen a 440i (Coupe/GranCoupe/Convertibel) so couldn't tell you if it would fit. I would be surprised if it did though.

[jeebus]

Does DINAN never respond to email? Ordered this exhaust 10 days ago and still no word about shipping, and no replies to any emails asking about it.