F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > [TUTORIAL]Retrofit rear lights BMW F30/F31/F80 LCI
ARMA SPEED
Post Reply
 
Thread Tools Search this Thread
      10-08-2016, 11:40 AM   #45
david51
Captain
david51's Avatar
France
538
Rep
817
Posts

Drives: bmw M3 F80
Join Date: Dec 2013
Location: france

iTrader: (0)

Garage List
Quote:
Originally Posted by rfcoolz View Post
Pictures are gone
what pictures ?
Appreciate 0
      10-24-2016, 08:48 PM   #46
Wunsch
Private
Wunsch's Avatar
24
Rep
57
Posts

Drives: 2023 i4 M50
Join Date: Feb 2016
Location: Regina, SK, Canada

iTrader: (0)

This tutorial is great, and I really appreciate it. Unfortunately, I'm finding that the inside of the hatch on the F31 is quite different from the liner inside the trunk lid on the F30. Does anybody have some tips on how to get at the inner lights on an F31?

Last edited by Wunsch; 10-24-2016 at 08:55 PM..
Appreciate 0
      10-24-2016, 08:59 PM   #47
Gabreigns
Major
Gabreigns's Avatar
493
Rep
1,076
Posts

Drives: F3x
Join Date: Jul 2015
Location: USA

iTrader: (0)

Quote:
Originally Posted by Wunsch View Post
This tutorial is great, and I really appreciate it. Unfortunately, I'm finding that the inside of the hatch on the F31 is quite different from the liner inside the trunk lid on the F30. Does anybody have some tips on how to get at the inner lights on an F31?
PMd
Appreciate 3
      10-26-2016, 03:31 AM   #48
weytie
Banned
77
Rep
269
Posts

Drives: BMW M4 F82 Competition
Join Date: May 2005
Location: Belgium

iTrader: (2)

Quote:
Originally Posted by Gabreigns View Post
PMd
Can you also PM me this?
Thx
Appreciate 0
      11-04-2016, 04:15 PM   #49
weytie
Banned
77
Rep
269
Posts

Drives: BMW M4 F82 Competition
Join Date: May 2005
Location: Belgium

iTrader: (2)

As the install of the lights on a F31 is a bit more complicated then the F30, here some pics of the wiring for the inner lights.

Here is how I did the wiring.
The only parts you have to remove are the 2 sliding covers (where the lights are), the upper trim of the tailgate.
Also undo the trim where the concertina goes inside the tailgate.(there’s 1 torx screw under the rubber piece, the rest just clicks off). See picture.

Then i took out the inner taillight on the right side.
You can run the wiring of the left taillight tot he right side with a bith routing.

Then I inserted a flexible iron wire from the top of the tailgate tot he bottom of the tailgate where the inner light is.
This is very easy. Now you take the 2 wires and tape them tot he metal wire and pull the wire up and guide the wires easily to the top.
Once this is done, you take out the sealings of the rubber concertina on both sides.
I then sprayed some silicone spray in the concertina and on the wires to guide them easy through the concertina.
Actually this went really easy.
It’s just a matter of opening and closing the uper part of the tailgate and complete tailgate for easy acces of putting in the wires.

Then you release the 2 screw on the D pillar and pull off the rubber seal ( you have to pull strong to take off.
Now you take off the cover fort he battery to access the REM box.
I connected them directly to the connectors with a scotchlock tot he correct wires.
Put everything back together and done 
Attached Images
     
Appreciate 4
      12-04-2016, 12:57 PM   #50
Morasool
Private First Class
Morasool's Avatar
108
Rep
115
Posts

Drives: 335d xDrive - Mercedes S350
Join Date: Nov 2016
Location: Manchester

iTrader: (0)

I've fitted these to mine now but I use the original BMW OEM Retrofit cable part no# 61122410220 it was only £40.

In have attached the original BMW fitting instructions for these lights using the original retrofit cable.
Attached Images
File Type: pdf F30 LCI REAR.pdf (402.3 KB, 4790 views)

Last edited by Morasool; 12-06-2016 at 04:49 AM..
Appreciate 1
GCinFLA284.00
      12-11-2016, 07:29 AM   #51
Aj1000
AJ
0
Rep
14
Posts

Drives: F30
Join Date: Oct 2015
Location: India

iTrader: (0)

Quote:
Originally Posted by VinnyA320 View Post
Hey guys. I ran a new wire from each inner lci taillight to the box by the battery. Which slots do i put the wires in for the inner turn signals/ brake lights to work? The locations in this guide are currently already used in my F80 for the slot numbers.
Everything else is working besides that. Thanks!
I have run the 2 wires from inner lights to the REM. Where exactly do I plug these in the REM? Which connector and which slot? Did not quite get it.
Appreciate 0
      03-01-2017, 10:09 AM   #52
david51
Captain
david51's Avatar
France
538
Rep
817
Posts

Drives: bmw M3 F80
Join Date: Dec 2013
Location: france

iTrader: (0)

Garage List
Quote:
Originally Posted by Aj1000 View Post
I have run the 2 wires from inner lights to the REM. Where exactly do I plug these in the REM? Which connector and which slot? Did not quite get it.

This is indicated on the first page
Appreciate 0
      03-19-2017, 04:19 PM   #53
Nomana
Lieutenant Colonel
Nomana's Avatar
1465
Rep
1,637
Posts

Drives: BMW
Join Date: Sep 2014
Location: SN

iTrader: (0)

What kind of flash on startup if i do not code?
Any vid?
I plan to install it myself since there's no shop around here and I'm too lazy to learn coding
Appreciate 0
      03-24-2017, 04:07 PM   #54
david51
Captain
david51's Avatar
France
538
Rep
817
Posts

Drives: bmw M3 F80
Join Date: Dec 2013
Location: france

iTrader: (0)

Garage List
Quote:
Originally Posted by Nomana View Post
What kind of flash on startup if i do not code?
Any vid?
I plan to install it myself since there's no shop around here and I'm too lazy to learn coding

The coding of new fires is not required, since there is no error on the idrive but against there will flicker flashing at each startup
Appreciate 0
      05-26-2017, 11:14 AM   #55
MrChang
Private
36
Rep
88
Posts

Drives: F31 M-Sport MG 2014
Join Date: Feb 2014
Location: Sweden

iTrader: (0)

Quote:
Originally Posted by weytie View Post
As the install of the lights on a F31 is a bit more complicated then the F30, here some pics of the wiring for the inner lights.

Here is how I did the wiring.
The only parts you have to remove are the 2 sliding covers (where the lights are), the upper trim of the tailgate.
Also undo the trim where the concertina goes inside the tailgate.(there’s 1 torx screw under the rubber piece, the rest just clicks off). See picture.

Then i took out the inner taillight on the right side.
You can run the wiring of the left taillight tot he right side with a bith routing.

Then I inserted a flexible iron wire from the top of the tailgate tot he bottom of the tailgate where the inner light is.
This is very easy. Now you take the 2 wires and tape them tot he metal wire and pull the wire up and guide the wires easily to the top.
Once this is done, you take out the sealings of the rubber concertina on both sides.
I then sprayed some silicone spray in the concertina and on the wires to guide them easy through the concertina.
Actually this went really easy.
It’s just a matter of opening and closing the uper part of the tailgate and complete tailgate for easy acces of putting in the wires.

Then you release the 2 screw on the D pillar and pull off the rubber seal ( you have to pull strong to take off.
Now you take off the cover fort he battery to access the REM box.
I connected them directly to the connectors with a scotchlock tot he correct wires.
Put everything back together and done 
Hello!

I am in the progress to install the lci taillights on my f31 and I am going to follow your instructions. But what parts of the tailgate inside trim do I need to remove? And do I need to remove the d-pillar trim? Thanks in advance.



Appreciate 0
      05-28-2017, 03:44 PM   #56
MrChang
Private
36
Rep
88
Posts

Drives: F31 M-Sport MG 2014
Join Date: Feb 2014
Location: Sweden

iTrader: (0)

Hello!

I installed the lights today without having to remove any trim panels except for the battery panel, the light covers and the left outside tailgate panel as shown on your photo. I manage to route the cables by using a steel wire (with plastic isolation) to drag the cable through. One issue I got (I dont think I have seen that been mentioned) was the LCI inner tail lights had a M8 screw instead of a M10. I manage to solve it by removing the flared M10 nut and replace it with a washer and M8 nut.

Next step will be coding.
Appreciate 0
      06-22-2017, 03:23 AM   #57
valtinpaul
Registered
0
Rep
1
Posts

Drives: bmw f30
Join Date: May 2016
Location: romania

iTrader: (0)

lci taillights instalation

Hi. i downloaded the originalninstructions pdf from bmw. They wrote that you have to plug the 2 extra wires in the A174 13b pin 5 and pin 13.

Are there more options for the conection of the 2 wires?
Thanks
Appreciate 0
      06-22-2017, 09:02 PM   #58
david51
Captain
david51's Avatar
France
538
Rep
817
Posts

Drives: bmw M3 F80
Join Date: Dec 2013
Location: france

iTrader: (0)

Garage List
Quote:
Originally Posted by valtinpaul View Post
Hi. i downloaded the originalninstructions pdf from bmw. They wrote that you have to plug the 2 extra wires in the A174 13b pin 5 and pin 13.

Are there more options for the conection of the 2 wires?
Thanks

If you follow the procedure of the BMW document

Here is the coding to do


Just add to the HO-wort (HELD) and code REM





If after adding HELC and REM code does not work
It is necessary to modify as indicated

REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_PWM_LEVEL_1 = 100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_PWM_LEVEL_1 = 100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_FIXED_PWM = fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_FIXED_PWM = fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_L_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_R_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_6_OUTPUT = sl_2_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_7_OUTPUT = sl_2_r
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_8_OUTPUT = bfd_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_9_OUTPUT = bfd_r
REM_01 > LceOutputChannels 3061 > BFD_L_CCM = ccm_blinker_l
REM_01 > LceOutputChannels 3061 > BFD_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_L_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BFD_R_CCM = ccm_blinker_r
REM_01 > LceOutputChannels 3061 > BFD_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_R_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_L_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_WARMUEBERWACHUNG = aktiv [Default]
REM_01 > LceOutputChannels 3061 > FRA_H_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_WARMUEBERWACHUNG = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_L_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_CCM = NEW_ccm_nsl_r
REM_01 > LceOutputChannels 3061 > NSL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_R_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > RFS_L_CCM = NEW_ccm_rfs_l
REM_01 > LceOutputChannels 3061 > SL_2_L_CCM = Fxx_ccm_sl_2_l
REM_01 > LceOutputChannels 3061 > SL_2_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_2_R_CCM = Fxx_ccm_sl_2_r
REM_01 > LceOutputChannels 3061 > SL_2_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_R_IS_LED = aktiv
Appreciate 2
      06-30-2017, 09:02 PM   #59
Djmf30
New Member
Djmf30's Avatar
2
Rep
17
Posts

Drives: F30 few oem upgrades
Join Date: Jun 2017
Location: Los Angeles CA

iTrader: (0)

Quote:
Originally Posted by david51 View Post
Quote:
Originally Posted by valtinpaul View Post
Hi. i downloaded the originalninstructions pdf from bmw. They wrote that you have to plug the 2 extra wires in the A174 13b pin 5 and pin 13.

Are there more options for the conection of the 2 wires?
Thanks

If you follow the procedure of the BMW document

Here is the coding to do


Just add to the HO-wort (HELD) and code REM





If after adding HELC and REM code does not work
It is necessary to modify as indicated

REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_PWM_LEVEL_1 = 100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_PWM_LEVEL_1 = 100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_FIXED_PWM = fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_FIXED_PWM = fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_L_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_R_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_6_OUTPUT = sl_2_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_7_OUTPUT = sl_2_r
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_8_OUTPUT = bfd_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_9_OUTPUT = bfd_r
REM_01 > LceOutputChannels 3061 > BFD_L_CCM = ccm_blinker_l
REM_01 > LceOutputChannels 3061 > BFD_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_L_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BFD_R_CCM = ccm_blinker_r
REM_01 > LceOutputChannels 3061 > BFD_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_R_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_L_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_WARMUEBERWACHUNG = aktiv [Default]
REM_01 > LceOutputChannels 3061 > FRA_H_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_WARMUEBERWACHUNG = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_L_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_CCM = NEW_ccm_nsl_r
REM_01 > LceOutputChannels 3061 > NSL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_R_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > RFS_L_CCM = NEW_ccm_rfs_l
REM_01 > LceOutputChannels 3061 > SL_2_L_CCM = Fxx_ccm_sl_2_l
REM_01 > LceOutputChannels 3061 > SL_2_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_2_R_CCM = Fxx_ccm_sl_2_r
REM_01 > LceOutputChannels 3061 > SL_2_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_R_IS_LED = aktiv
I followed this and my inner blinkers won't function the brake light works but no inner blinker. Also lost the blink when lock/unlock
Appreciate 0
      07-01-2017, 05:50 AM   #60
gpdrama
Enlisted Member
gpdrama's Avatar
Greece
14
Rep
43
Posts

Drives: F30 316i
Join Date: Aug 2015
Location: Athens, Greece

iTrader: (0)

Quote:
Originally Posted by Djmf30 View Post
Also lost the blink when lock/unlock
Just tick it on the iDrive menu, it deselected because of that coding.
Appreciate 0
      07-01-2017, 05:52 AM   #61
gpdrama
Enlisted Member
gpdrama's Avatar
Greece
14
Rep
43
Posts

Drives: F30 316i
Join Date: Aug 2015
Location: Athens, Greece

iTrader: (0)

Because of the 2 or 3 threads of the Mperformance tail lights on the forum, I asked the following and I leave it here for anyone who knows...

Quote:
Originally Posted by gpdrama View Post
On the coding, does anyone know what exactly FRA_H (L & R) means and why should the FRA_H WARMUEBERWACHUNG be set to aktiv despite that all of the rest WARMUEBERWACHUNG options are set to nicht_aktiv ?
Appreciate 0
      07-01-2017, 09:35 AM   #62
david51
Captain
david51's Avatar
France
538
Rep
817
Posts

Drives: bmw M3 F80
Join Date: Dec 2013
Location: france

iTrader: (0)

Garage List
Quote:
Originally Posted by Djmf30 View Post
I followed this and my inner blinkers won't function the brake light works but no inner blinker. Also lost the blink when lock/unlock

Did you connect the following wires correctly ?
A174 13b pin 5 and pin 13
Appreciate 0
      07-01-2017, 09:36 AM   #63
david51
Captain
david51's Avatar
France
538
Rep
817
Posts

Drives: bmw M3 F80
Join Date: Dec 2013
Location: france

iTrader: (0)

Garage List
The fastest procedure and which works very well is on the first page
Appreciate 0
      07-01-2017, 09:43 AM   #64
Djmf30
New Member
Djmf30's Avatar
2
Rep
17
Posts

Drives: F30 few oem upgrades
Join Date: Jun 2017
Location: Los Angeles CA

iTrader: (0)

Quote:
Originally Posted by david51 View Post
Quote:
Originally Posted by Djmf30 View Post
I followed this and my inner blinkers won't function the brake light works but no inner blinker. Also lost the blink when lock/unlock

Did you connect the following wires correctly ?
A174 13b pin 5 and pin 13
Hi yes I did connect blue and green cable to rem as instructed and coded rem 3061 for led flickering
I get no lamp errors on dash, all 4 pieces of the tail lights power on but when using the turn signals I don't see the inner led working.
Appreciate 0
      07-01-2017, 05:04 PM   #65
david51
Captain
david51's Avatar
France
538
Rep
817
Posts

Drives: bmw M3 F80
Join Date: Dec 2013
Location: france

iTrader: (0)

Garage List
Quote:
Originally Posted by Djmf30 View Post
Hi yes I did connect blue and green cable to rem as instructed and coded rem 3061 for led flickering
I get no lamp errors on dash, all 4 pieces of the tail lights power on but when using the turn signals I don't see the inner led working.

After adding HELC you have right click CODE on REM module ?

connect the wire of the inner light left to REM 174*12b pin17 and
and the wire of the inner light right to REM 174*14b pin12
Appreciate 1
Djmf301.50
      07-01-2017, 05:32 PM   #66
Djmf30
New Member
Djmf30's Avatar
2
Rep
17
Posts

Drives: F30 few oem upgrades
Join Date: Jun 2017
Location: Los Angeles CA

iTrader: (0)

Quote:
Originally Posted by david51 View Post
Quote:
Originally Posted by Djmf30 View Post
Hi yes I did connect blue and green cable to rem as instructed and coded rem 3061 for led flickering
I get no lamp errors on dash, all 4 pieces of the tail lights power on but when using the turn signals I don't see the inner led working.

After adding HELC you have right click CODE on REM module ?

connect the wire of the inner light left to REM 174*12b pin17 and
and the wire of the inner light right to REM 174*14b pin12
Yes I fdl coded rem after adding HELC but that made no change. Yes I saw another post where they instead wired the inner tails to rem 174 12b pin 17 snd 174 14b pin 12 as you noted below. I know that's where the outer tails get power for turn signals. Sounds like that will be final solution. Be back with results thanks for the help
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:21 AM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST