03-09-2022, 07:06 AM | #1 |
Private First Class
27
Rep 161
Posts |
BimmerCode Easy entry default values
Hi guys,
I had used the BimmerCode expert mode to code easy entry with success. A few month later Bommercode app added the option to do it using basic preprogrammed function. So I thought I'd apply the pre-programmed one… now it's not working. I'm hoping to fix this by reverting back the expert mode entries to default. Do you know what they were? I believe the below is the easy entry programming I had used: Driver Seat: 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00 Passenger Seat: 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = UKNOWN, WERTE=03 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00 Thanks! Maz |
03-09-2022, 03:27 PM | #2 |
Private First Class
62
Rep 132
Posts |
I think the default are 60mm for seat travel and 100mm for protection area if that helps
For my actual seating position, I had to set both to 50mm to get easy entry to function properly You should also be able to revert your previous coding/setting by restoring backups for the seat module
__________________
F80 M3 Comp in Sakhir Orange
|
Appreciate
1
mazen22226.50 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|